
CHARGEUR USB
CARACTÉRISTIQUES & FONCTIONNEMENT
FONCTIONNEMENT DE LA JAUGE DE DURÉE D’ILLUMINATION
USER GUIDE
RAW PRO • RAW XS
For more information please visit:
exposurelights.com
WARRANTY & SERVICE
MAINTENANCE
WARNING
RAW est conçue pour fonctionner dans les conditions marines et en plein air les plus extrêmes.
Pour garantir une étanchéité optimale assurez-vous que le capuchon est bien vissé et que le
silicone couvre bien l’emplacement du port.
Si la lampe a été stockée pendant une longue période , merci de vous assurer que la batterie est
régulièrement rechargée.
Please do not send any products back to us without contacting our service team rst to
discuss your issue and for a valid returns number.
All our lights come with a 2 year warranty.
If you have a servicing or technical question you can contact us using the information below. If you
return your light for repair, no work will be carried out until you have been contacted with the cost
for the repair. If you are outside of the UK it would be quicker in the rst instance to contact your
local distributor.
+44 (0)1798 839300
Exposure Lights are very powerful lighting systems, please take care when operating. Do not
look directly into the light or shine directly at others, including other road users.
Exposure Lights / Ultimate Sports Engineering Ltd. accept no liability for any injuries or other
damages arising from the use of their product in any circumstances.
NOTE: Patents apply.
Fully Charge your light before rst use.
AVERTISSEMENT: assurez-vous que votre lampe est complètement sèche et nettoyée (sans sel)
avant de dévisser le capuchon.
MODE
LUMIÈRE ROUGE LUMIÈRE BLANCHE
LUMENS DURÉE LUMENS DURÉE
MODE INTENSE 50 2hrs 200 1hrs
MODE MOYEN 15 6hrs 50 3hrs
MODE BAS 2 25hrs 15 10hrs
STROBOSCOPIQUE – – 200 5hrs
FONCTIONNEMENT OPÉRATIONS CORRESPONDANTES
LUMIÈRE ROUGE ALLUMÉE APPUYER PUIS LÂCHER LE BOUTON FONCTION
CHANGER DE MODE APPUYER PUIS LÂCHER LE BOUTON FONCTION
ETEINDRE APPUYER PUIS MAINTENIR LE BOUTON FONCTION JUSQU’À
CE QUE LA LUMIÈRE S’ÉTEIGNE PUIS RELÂCHER
ALLUMER LA LUMIÈRE BLANCHE EN MODE BAS APPUYER PUIS MAINTENIR LE BOUTON FONCTION JUSQU’À
CE QUE LA LUMIÈRE BLANCHE APPARAISSE
ALLUMER LA LUMIÈRE BLANCHE EN MODE INTENSE
APPUYER PUIS MAINTENIR LE BOUTON FONCTION JUSQU’À
CE QUE LA LUMIÈRE BLANCHE APPARAISSE ET MAINTENIR
LE BOUTON JUSQU’À CE QUE LE MODE INTENSE SOIT ACTIVÉ
PASSER DE LA LUMIÈRE BLANCHE À LA ROUGE EN MODE BAS APPUYER PUIS MAINTENIR LE BOUTON FONCTION, LA LAMPE
VA S’ÉTEINDRE PUIS REVENIR SUR LA LUMIÈRE BLANCHE
ACTIVER LE MODE STROBOSCOPIQUE
APPUYER PUIS MAINTENIR LE BOUTON FONCTION QUAND LA
LUMIÈRE BLANCHE EST ACTIVÉE JUSQU’À CE QUE LE MODE
STROBOSCOPIQUE SE METTE EN MARCHE
3 secondes après avoir appuyé sur le bouton Fonction, la jauge s’afche. La couleur du
bouton indique à présent le pourcentage approximatif de la puissance de la batterie restante.
Quand la batterie n’est plus qu’à 5% de sa capacité, la lumière passe automatiquement en
mode ash en basse intensité et le bouton Fonction ashe en rouge.
LED BATTERIE %
VERT 100 - 50
AMBRÉ 50 - 25
ROUGE 25 - 5
FLASH ROUGE 5 - VIDE
2. Dévissez le capuchon
du bouton jusqu’à ce que
le port du chargeur USB
soit visible – environ 5
rotations
3. Insérez le câble du
chargeur des lampes
EXPOSURE
1. Repoussez la languette à
l’arrière vers le bouton – ne
l’enlevez pas
LANYARD FITTING (RAW XS ONLY)
Le bouton Fonction ashe pendant la durée de chargement. Quand la batterie est complètement
chargée, le bouton Fonction s’allume en vert constant. Le chargement dure 1H30.