Exor ETOP600 Series Manuel utilisateur

eTOP600 Series

Operating Instructions

User’s Manual for eTOP600 Series Products

MANUGENETOP6xx - Version 1.06

Subject to change without notice

The information contained in this document is provided for informational purposes only. While efforts were made to verify the accuracy of the information

contained in this documentation, it is provided “as is” without warranty of any kind.

Third-party brands and names are the property of their respective owners.

www.exorint.com

MANUGENETOP6xx - Version 1.06

Table of Contents

Introduction 4

1 Product Overview 6

2 Standards and Approvals 7

3 Technical Specications 9

4 Technical Data 11

4.1 Dimensions 13

4.2 Installation Environment 15

4.3 Safety instruction 16

4.4 Installation Procedure 16

5 Connections 17

5.1 Serial Port 19

5.2 Ethernet Port 19

5.3 Optional plugin module 20

5.4 Optional plugin module identication 21

5.5 Optional plugin module installation procedure 22

6 Power Supply, Grounding and Shielding 24

7 Battery 25

8 Special Instruction for Use 26

9 Getting Started 26

10 System Settings 27

11 Unpacking and Packing Instructions 30

MANUGENETOP6xx - Version 1.06

Introduction

The operational guidelines described below is information which relates to the device, installation, transpor-

tation, storage, assembly, use and maintenance.

This Operating Instruction describes the main features of the Exor operator panels. The Manual refers to the

following models:

eTOP605 Operator interface with TFT color 5” widescreen display touchscreen

eTOP607 Operator interface with TFT color 7” widescreen display touchscreen

eTOP607M Operator interface with TFT color 7” widescreen display touchscreen, 1GHz CPU

eTOP610 Operator interface with TFT color 10.1” widescreen display touchscreen

MANUGENETOP6xx - Version 1.06

Safety Guide

The manual contains safety standards that must be respected for the personal safety and to avoid damage.

Indications of attention are divided into three levels of severity:

DANGER: indicates a failure to observe safety rules and such failure may cause death or serious injuries.

ATTENTION: indicates a failure to observe safety rules and that deciency may cause damage.

CAUTION: indicates a failure to observe safety rules and that deciency may cause defects to the equipment

or inconsistencies.

CAUTION

ATTENTION

DANGER



MANUGENETOP6xx - Version 1.06

1 Product Overview

The Exor eTOP Series 600 HMI products combine state-of-the-art features and top performance with an

oustanding design. They are the ideal choice for all demanding HMI applications including factory and building

automation.

The eTOP Series 600 HMI panels have been designed to run the JMobile software.

• Designed for use with JMobile HMI software.

• Full vector graphic support. Native support of SVG graphic objects. Trasparency and alpha blending.

• Full object dynamics: control visibility and transparency, move, resize, rotate any object on screen. Change

properties of basic and complex objects.

• TrueType fonts.

• Multilanguage applications. Easily create and manage your applications in multiple languages to meet global

requirements. Far East languages are supported. Tools available in JMobile Studio support easy third-party

translations and help reducing development and maintenance costs of the application.

• Data display in numerical, text, bargraph, analog gauges and graphic image formats.

• Rich set of state-of-the-art HMI features: data acquisition, alarm handling, scheduler and timed actions (daily

and weekly schedulers, exception dates), recipes, users and passwords, RSS feeds, rotating menus.

• Includes support for a wide range of communication drivers for Factory systems.

• Multiple drivers communication capability.

• Remote monitoring and control. Client-Server functionality.

• On-line and Off-line simulation with JMobile Studio.

• Powerful scripting language for automating HMI applications. Script debugging improves efciency in

application development.

• Rich gallery of vector symbols and objects.

• Optional plug-in modules for eldbus systems, I/O and controllers.

MANUGENETOP6xx - Version 1.06

The products have been designed for use in an industrial environment in compliance with the 2014/30/EU

EMC Directive.

The products have been designed in compliance with:

EN 61000-6-4 EN 55011

EN 61000-6-2 EN 61000-4-2

EN 61000-4-3

EN 61000-4-4

EN 61000-4-5

EN 61000-4-6

EN 61000-4-8

EN60945

IECEx IECEx: IECEx ULD 16.0007X

IEC 60079-0, Ed.6 Ex nA IIC T4 Gc

IEC 60079-15, Ed.4 Ex tc IIIC T105°C Dc

IEC 60079-31, Ed.2

ATEX DEMKO 16 ATEX 1683X

EN 60079-0: 2012+A11:2013 II 3G Ex nA IIC T4 Gc

EN 60079-15: 2010 II 3D Ex tc IIIC T105°C Dc

EN 60079-31: 2014

The installation of these devices into the residential, commercial and light-industrial environments is allowed

only in the case that special in measures are taken in order to ensure conformity to EN 61000-6-3.

The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS) Directive

2011/65/EU

In compliance with the above regulations the products are CE marked.

2 Standards and Approvals

MANUGENETOP6xx - Version 1.06

Product Identication

The product may be identied through a plate attached to the rear cover. You will have to know the type of

unit you are using for correct usage of the information contained in the guide.

An example of this plate is shown in the gure below:

Note: the eTOP607 label is used as an example for eTOP600 Series

product model name eTOP607

product part number ETOP607U5P1

year/week of production 1816

serial number AA00001R0000000561AA

version id of the product 090903A03001000

manufacturer address Exor International S.p.A.

Via Monte Fiorino 9

IT-37057 San Giovanni Lupatoto (VR)

ATEX Marking DEMKO 16 ATEX 1683X

II 3G Ex nA IIC T4 Gc

II 3D Ex tc IIIC T105°C Dc

IECEx Marking IECEx: IECEx ULD 17.0019X

Ex nA IIC T4 Gc

Ex tc IIIC T105°C Dc

2 Standards and Approvals

MANUGENETOP6xx - Version 1.06

3 Technical Specications

Electromagnetic Compatibility (EMC)

Radiated disturbance test Class A EN 55011

EN 61000-4-2

Electrostatic discharge immunity test 8 kV (air electrostatic discharge) EN 61000-4-2

4 kV (contact electrostatic discharge)

Radiated, radio-frequency, 80 MHz ÷ 1 GHz, 10V/m EN 61000-4-3

electromagnetic eld immunity test 1,4 GHz ÷ 2 GHz, 3 V/m

2 GHz ÷ 2.7 GHz, 1 V/m

Burst immunity test ± 2 KV dc power port EN 61000-4-4

± 1 KV signal line

Surge immunity test ± 0,5 KV dc power port (line to earth) EN 61000-4-5

± 0,5 KV dc power port (line to line)

± 1 KV signal line (line to earth)

Immunity to conducted disturbances

inducted by radiofrequency eld 0.15 ÷ 80 MHz, 10V EN 61000-4-6

Environmental conditions

Operating temperature (surrounding -20 ÷ +60°C (vertical installation) EN 60068-2-14

air temperature) Plug-in modules and USB devices

may limit max temperature to +50°C

Storage temperature -20 ÷ +70°C EN 60068-2-1

EN 60068-2-2

EN 60068-2-14

Operating and storage humidity 5 ÷ 85 % RH not-condensing EN 60068-2-30

Vibrations 5 ÷ 9 Hz, 7 mm p-p EN 60068-2-6

9 ÷ 150 Hz, 1 g

Shock ± 50 g, 11 ms, 3 pulses per axis EN 60068-2-27

Protection class Front panel IP66, Rear IP20 EN 60529

Touchscreen technology Projected capacitive

Back-up battery 3V 50mAh Lithium, rechargeable, not user-replaceable,

model VL2330.

Fuse Automatic

Serial Port RS-232, RS-485, RS-422 software congurable

Flash 128MB for eTOP605, eTOP607, 256MB for eTOP607M,

eTOP610

RAM 256MB

Hardware clock Clock/Calendar with back-up battery

Accuracy RTC (at 25°C) <100ppm

MANUGENETOP6xx - Version 1.06

Voltage dips, short interruptions and

voltage variations immunity test Port: AC mains; Level:

100% duration: 1 cycle and 250 cycles (50Hz);

1 cycle and 300 cycles (60Hz);

40% duration: 10 cycles (50Hz);

70% duration: 25 cycles (50Hz);

Phase: 0°-180°

Test executed on the 230Vac side of the Exor International S.p.A. Power Supply EN 61000-4-11

Durability information

Backlight service life 40000 Hrs. or more

(LED type) (Time of continuos operation until the brightness of the

backlight reaches 50% of the rated value when the

sorrounding air temperature is 25°C) - see Note 1

Note 1: Extended use in environments where the surrounding air temperature is 40°C or higher may degrade

backlight quality/reliability/durability.

3 Technical Specications

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Exor Panneau de contrôle

Exor

Exor eTOP500 Glass Series Manuel utilisateur

Manuels Panneau de contrôle populaires d'autres marques

RDZ

RDZ PC-HRX Manuel utilisateur

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuel technique

Efka

Efka Variocontrol V810 Manuel utilisateur

Cebora

Cebora 208-10 Manuel utilisateur

AMX

AMX AutoPatch CP-15 Manuel utilisateur

Satel

Satel CA-6 KLED-S Manuel utilisateur

Evolution

Evolution IQ plus 800 Manuel utilisateur

Fagor

Fagor 8040 TCO CNC Manuel utilisateur

Trane

Trane ComfortLink II XL950 Control Manuel utilisateur

AKO

AKO PROCool AKO-17635-2 Manuel utilisateur

ABB

ABB 6136/30M-101 Manuel utilisateur

Telikou

Telikou BK-603 Belt Pack Manuel utilisateur

Mapei

Mapei Mapeheat Thermo Touch Manuel utilisateur

Bosch

Bosch D9412GV4 Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuel utilisateur

Sminn

Sminn BOX L VF1L EI Manuel utilisateur

Balboa

Balboa TP600 Manuel utilisateur

Nice

Nice HSCU1 Caractéristiques techniques

Exor eTOP600 Series Manuel utilisateur

Manuels Panneau de contrôle populaires d'autres marques