EXFO Optical Explorer OX1 Manuel d'utilisation
P/N: 1083015 Version: 2.0.0.1 1/30
NOTICE
This information only applies to the
OX1 Optical Explorer units.
Important Information
Note: Before getting started with the EXFO OX1 Optical Explorer, first read the
important safety information provided in this notice. For additional
information, refer to the OX1 Optical Explorer user guide available from the
TestFlow/Exchange mobile application.
Overview
The OX1 Optical Explorer is a handheld, ultra-simple, and ultra-fast tool
offering multiple test functions to verify any short- to medium-length (up to
40 km) optical links and their components. It is particularly well suited for
installation and repair jobs.
It can work in association with a smart device equipped with the EXFO
TestFlow/Exchange mobile application allowing you to document the test
results, archive them, and generate reports.
Copyright © 2019–2022 EXFO Inc. All rights reserved. 2/30
Overview
Front panel
Touchscreen
Power (on/off) button
(also serves as battery status LED)
Optical port (Pro unit
with Click-Out optical
connector shown)
Laser radiation emitted
at this port when laser is
active.
Holes for the hand strap
Copyright © 2019–2022 EXFO Inc. All rights reserved. 3/30
Overview
Top panel
Bottom panel
Optical port (Pro unit with
Click-Out optical connector shown)
USB 2.0 Type-C connector for
battery charging with USB power
adapter (refer to user guide for
more information)
Copyright © 2019–2022 EXFO Inc. All rights reserved. 4/30
Regulatory Information
Regulatory Information
USA Electromagnetic Interference Regulatory
Statement
Electronic test and measurement equipment is exempt from FCC part 15,
subpart B compliance in the United States of America. However, EXFO Inc.
makes reasonable efforts to ensure compliance to the applicable
standards.
The limits set by these standards are designed to provide reasonable
protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance
with the user documentation, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
Copyright © 2019–2022 EXFO Inc. All rights reserved. 5/30
Regulatory Information
Canada Electromagnetic Interference Regulatory
Statement
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference.
Cet équipement génère, utilise et peut émettre de l'énergie
radio-fréquence et, s'il n'est pas installé et utilisé conformément à la
documentation de l'utilisateur, il peut occasionner une interférence néfaste
aux communications radio. L'utilisation de cet équipement dans une zone
résidentielle est susceptible d'occasionner une interférence néfaste.
Caution: This equipment is not intended for use in residential
environments and may not provide adequate protection to radio reception
in such environments.
Attention : Cet appareil n'est pas destiné à être utilisé dans des
environnements résidentiels et peut ne pas assurer la protection adéquate
à la réception radioélectrique dans ce type d'environnements.
Copyright © 2019–2022 EXFO Inc. All rights reserved. 6/30
Regulatory Information
This is a class A, group 1 product.
Ceci est un produit de classe A, groupe 1.
Class A equipment: Equipment that is, by virtue of its characteristics,
highly unlikely to be used in a residential environment, including a
home business shall be classified as class A and shall comply with the
class A limits specified in the applicable ICES standard. Characteristics
considered in this assessment include price, marketing and advertising
methodology, the degree to which the functional design inhibits
applications suitable to residential environments, or any combination
of features that would effectively preclude the use of such equipment
in a residential environment.
Classe A : Matériel qui, en raison de ses caractéristiques, ne sera fort
probablement pas utilisé dans un milieu domiciliaire ni par des
entreprises établies à domicile. Parmi les caractéristiques considérées
dans cette évaluation, il y a le prix, les méthodes de commercialisation
et de publicité, la mesure dans laquelle les fonctions de l'appareil font
qu'il ne se prête pas à des applications convenant au milieu
domiciliaire ou toute combinaison de ces caractéristiques qui aurait
pour conséquence d'en prévenir effectivement l'utilisation à domicile.
Utilisé également pour indiquer les limites d'émission correspondantes
qui s'appliquent à un tel matériel.
Class B equipment: Equipment that cannot be classified as Class A
shall comply with the Class B limits specified in the applicable ICES
standard.
Classe B : Matériel qui ne peut pas être inclus dans la classe A. Utilisé
également pour indiquer les limites d'émission correspondantes qui
s'appliquent à un tel matériel.
Copyright © 2019–2022 EXFO Inc. All rights reserved. 7/30
Regulatory Information
Group 1 equipment: group 1 contains all equipment which is not
classified as group 2 equipment, and includes equipment such as
laboratory and scientific equipment, industrial process, measurement
and control equipment.
Group 2 equipment: group 2 contains all ISM RF equipment in which
radio-frequency energy in the frequency range 9 kHz to 400 GHz is
intentionally generated and used or only used locally, in the form of
electromagnetic radiation, inductive and/or capacitive coupling, for the
treatment of material for inspection/analysis purposes, or for transfer of
electromagnetic energy.
Appareils du groupe 1 : le groupe 1 réunit tous les appareils compris
dans le domaine d’application de la présente Norme, qui ne sont pas
classés comme étant des appareils du groupe 2. Le groupe 1 inclut les
appareils scientifiques et de laboratoire, les processus industriels,
appareils de mesure ou de contrôle.
Appareils du groupe 2 : le groupe 2 réunit tous les appareils ISM à
fréquences radioélectriques dans lesquels de l’énergie à fréquences
radioélectriques dans la plage de fréquences comprises entre 9 kHz et
400 GHz est produite et utilisée volontairement ou uniquement utilisée
localement sous forme de rayonnement électromagnétique, de
couplage inductif et/ou capacitif, pour le traitement de la matière, à
des fins d’examen ou d’analyse ou pour le transfert d’énergie
électromagnétique.
Supplier’s Declaration of Conformity (SDoC)
The SDoC for your product is as follows:
CAN ICES-001 (A) / NMB-001 (A)
Copyright © 2019–2022 EXFO Inc. All rights reserved. 8/30
Regulatory Information
EU and UK Electromagnetic Compatibility
Regulatory Statement
Warning: This is a class A product. In a domestic environment, this product
may cause radio interference in which case the user may be required to
take adequate measures. Your product is suitable for use in industrial
electromagnetic environments.
General Wireless Compliance Related Information
(Units With Wireless Capabilities Only)
Your unit comes with an internal wireless module (adapter) and two
antennas for which the information hereafter applies:
This product does not contain any wireless user-serviceable components.
Any unauthorized product changes or modifications will invalidate
warranty and all applicable regulatory certifications and approvals.
Canada and USA Wireless Compliance Related
Information (Units With Wireless Capabilities
Only)
Your unit comes with an internal wireless module (adapter) and two
antennas for which the information hereafter applies:
This device complies with Part 15 of the FCC Rules.
This device complies with Innovation, Sciences and Economic
Development Canada license-exempt RSS standards.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Copyright © 2019–2022 EXFO Inc. All rights reserved. 9/30
Regulatory Information
Use in Specific Environments:
The use of wireless products in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
The use of wireless products on airplanes is governed by the Federal
Aviation Administration (FAA).
The use of wireless products in hospitals is restricted to the limits set
forth by each hospital.
Do not operate a portable transmitter near unshielded blasting caps or
in an explosive environment.
Radiation Exposure Statement:
The product complies with the US/Canada portable RF exposure limit
set forth for an uncontrolled environment and is safe for intended
operation as described in this user documentation.
Further RF exposure reduction can be achieved if the device can be
kept as far as possible from the user’s body.
RF Function and Frequency Range:
Your unit is designed to operate in the Bluetooth and WLAN 2.4 GHz bands.
The information about the Bluetooth and Wi-Fi frequency bands is as
follows:
Bluetooth: Channels 1 through 11 - Between the frequencies 2412 MHz
- 2462 MHz.
The output power is 11.7 dBm typical.
Wi-Fi: Channels 1 through 11 - Between the frequencies 2412 MHz -
2462 MHz.
The maximum output power is 18.5 dBm.
Copyright © 2019–2022 EXFO Inc. All rights reserved. 10/30
Regulatory Information
EU and UK Wireless Compliance Related
Information (Units With Wireless Capabilities
Only)
Your unit is designed to operate in the Bluetooth and WLAN 2.4 GHz bands.
The information about the Bluetooth and Wi-Fi frequency bands is as
follows:
Bluetooth: Channels 1 through 13 - Between the frequencies 2412 MHz
- 2472 MHz.
The output power is 11.7 dBm typical.
Wi-Fi: Channels 1 through 13 - Between the frequencies 2412 MHz -
2472 MHz.
The maximum output power is 18.5 dBm typical.
This is a wideband transmission system (transceiver), intended for use in
all EU member states, United Kingdom, and EFTA countries, except in
France and Italy where restrictive use applies.
In Italy, the end-user should apply for a license at the national spectrum
authorities in order to obtain authorization to use the device for setting up
outdoor radio links and/or for supplying access to telecommunications
and/or network services.
This device may not be used for setting up radio links in France, and in
some areas the RF output power may be limited to 10 mW EIRP in the
frequency range of 2454 - 2483.5 MHz. For detailed information, the
end-user should contact the national spectrum authority in France.
Table des matières
Autres manuels EXFO Équipement de test
EXFO
EXFO MaxTester 700 Manuel utilisateur
EXFO
EXFO RTU-310 Manuel utilisateur
EXFO
EXFO IQS-2150 Manuel utilisateur
EXFO
EXFO FOT-12 Manuel utilisateur
EXFO
EXFO OTH-7000 Manuel utilisateur
EXFO
EXFO FTB-610 Manuel utilisateur
EXFO
EXFO FTB-700 Series Manuel utilisateur
EXFO
EXFO EX Series Manuel utilisateur
EXFO
EXFO FTV-700 series Manuel utilisateur
EXFO
EXFO MaxTester 635 Manuel utilisateur
EXFO
EXFO NetBlazer Series Manuel utilisateur
EXFO
EXFO FIP-400 Manuel utilisateur
EXFO
EXFO AXS-200/850 Manuel utilisateur
EXFO
EXFO FOT-10A Manuel utilisateur
EXFO
EXFO MAX-800 Series Manuel utilisateur
EXFO
EXFO Fiber Guardian FG-750 Manuel utilisateur
EXFO
EXFO MaxTester series Manuel d'exploitation et d'entretien
EXFO
EXFO IQS-2600B Manuel utilisateur
EXFO
EXFO FTB-860 Manuel utilisateur
EXFO
EXFO FTBx-88000 Series Manuel utilisateur
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
