the faster the speed. After the selection, the parameter will be saved automatically. If you press the ENTER
button, the display will exit to the previous menu mode. If you press the MENU button, the display will advance
to the next main menu mode.
"SnAP" color mutation pattern
Select “SnAP”(color abrupt mode), press the ENTER button to enter the next menu adjustment speed, display
“SPxx”(“xx”=01-99), use the UP/DOWN button to adjust between 1 and 99 The set value, the higher the
value, the faster the speed. After the selection, the parameter will be saved automatically. If you press the
ENTER button, the display will exit to the previous menu mode. If you press the MENU button, the display will
advance to the next main menu mode.
“Soud”sound mode
Select “Soud”（sound mode），ENTER button to enter the next menu voice control mode selection, display
"Soux" ("x" = 1-3), use the UP / DOWN button to select a different voice control mode between 1 and 3, "Sou1"
voice control jump, " Sou2”Sonic Pulse + Strobe, Sou3 Strobe, the parameters will be saved automatically. If
you press the ENTER button, the display will enter the voice sensitivity setting “Sexx”, (“xx”= 00-99). The
UP/DOWN button is between 0 and 99. Select the voice control sensitivity according to different requirements.
Press the ENTER button again to exit to the previous menu mode. If you press the MENU button, the display will
advance to the next main menu mode.
"SySt" system setting mode
Select “SySt”(system setting mode), press ENTER button to enter the next menu, display “teSt”, use
UP/DOWN button to select different between “rF24”,“FrEq”,“UIFI”and “Led”The setting, when selecting
"teSt" display, press ENTER button to confirm, the system will enter self-test mode, the display will be in "red",
"Gree", "blue", "UhIt", "yeLL", "PurP" Automatic switching between "FuLL", the display of the corresponding color
of the menu lamp will also light up, if you press the MENU, ENTER button to exit to the previous menu mode. At
this point, the self-test mode stops.
When the select “rF24”on display, press the ENTER button, the system will control the power of the 2.4G
wireless module, turn on the power when “on”is displayed, and turn off the power when “oFF”is displayed.
Press the MENU, ENTER button to exit to the previous menu mode. The parameters will be automatically saved
after exiting. If you use the 2.4G wireless module to receive signals, you must select "rF24" in the "on" state.
When selecting “FrEq”display, press ENTER button to enter 2.4G wireless module band selection, use
UP/DOWN button to select between “rF 1”~“Fr 7”bands, press MENU, ENTER Press to exit to the previous
