
Product Information
Dear customer,
Thank you for buying a high-quality aluminium greenhouse model JUNIOR.
Remarks
In this manual, you will find the assembly instructions for all basic/standard-model
greenhouses. However, this manual also contains pages which apply to optional accessories
that may not be included with your kit. This greenhouse is designed for cultivation of plants/
flowers. Therefore leakage, water drops and condensation inside the building are allowed. The
building may only be entered by competent persons during cultivation or maintenance.
Aluminium profiles that are not painted may show black stains, these stains are not a
production error: they can be easily removed with an aluminium cleaner available at a home
improvement store. The rubber strips have been treated with oil/silicone on the interior to
facilitate the assembly. The building should be mounted on a solid concrete foundation deep
enough to get a solid and frost-free ground. Anchoring of the foundation should be made by
the owner or operator and should be checked periodically. During winter, the roof will need to
be cleared of snow or supported in a suitable way. The greenhouse should be built in a
location protected from strong winds. Protective gear (such as protective gloves) should be
used during assembly in order to avoid injuries. One should at all times pay attention to the
local building regulations.
The assembly procedure is the same for all our greenhouses.
- Sorting of the profiles/extrusions according to the model/size of greenhouse. The
aluminum profiles (extrusions) are identified by their cross-section and length.
- Assembly of the complete aluminium framework.
- Leveling of the construction using a level
- Anchoring/securing of the greenhouse to the ground
- Glazing installation
Required tools
- Metric or Combination Measuring Tape (highly recommended)
- Socket wrench or spanner 10mm
- Level
- Screwdriver
- Drill + drill bit 4.2 mm
- Scissors (to cut the rubber).
We reserve the right to change the construction without prior notice!
Questions? Need Assembly Support?
Please call Exaco at 877-760-8500, ext. 701 or email
1