Software configuration Chapter 4.
4. Software config ration
4.1 Factory defa lt IP settings
Default LAN P address (Port 1) 10.0.0.153
Corresponding Subnet Mask 255.255.255.0
4.2 Network interface config ration
4.2.1 Selecting the appropriate P ranges
Configuring the VPN server is simple. However, you need to pay attention to the different P
ranges of the involved networks. The P range of
the LAN-side needs to be different than the one on
the WAN-side. Check with the network
administrator whether the planned WAN range is
compliant with the current T-policy. For more
information about the different networks used by
the eFive, please see the eFive User Guide, AUG-
050-0-EN which is available from the eWON
Support website
http://wiki.ewon.biz/Support/07_Documentations.Fi r
st connection
Connect your PC with the LAN-port of your eFive
(Port 1 - green). Make sure that your PC is having
an P address that is compatible with the default
LAN P address of the eFive. Open your browser
and type the default address 10.0.0.153 in the
URL field. Hit Enter. You can discard the security warning as shown.
Enter the default username and password.
Default username: admin
Default password: admin
Warning!
For security reasons, changing the default password admin is absolutely required.
To change the admin password, from the menu bar, click on System, Passwords. Enter the new
password twice and click Save.
eFive 100 nstallation Guide (How to) Page 7/13
