eWON FLX3101 Manuel utilisateur
support.ewon.biz
eWON Flexy
Single Ethernet Ext. Card
FLX3 0
This installation guide explains how to install the
eWON Flexy Single Ethernet Extension Card FLX 3101
Installation Guide
IG 017 / Rev 1 2
Table of Contents
. Product Summary ............................................................................................................. 3
2. Safety, Environmental & Regulatory Information ........................................................... 4
2 1 Scope 4
2 2 ESD Damage Prevention 4
2 3 Applicable Directives, Standards and Compliance 4
2 3 1 Applicable European Directives 4
2 3 2 Applicable Safety Standards 4
2 3 3 FCC Compliance 5
2 3 4 Certifications 5
3. Hardware Description ...................................................................................................... 6
3 1 Mechanical Layout and Interfaces 6
3 2 Extension Card Label 7
3 2 1 Label Location and Information Included 7
3 2 2 Part Number Structure for Extension Cards 8
3 3 Front Panel LEDs 8
3 4 Ethernet Port Specifications 9
3 5 eWON Flexy Extension Cards Environmental Conditions 9
3 6 Plugging the Extension Card into the Base Unit 9
3 6 1 Base Unit Slot Compatibility 9
3 6 2 Extension Card Insertion 10
3 6 3 Multiple Ethernet Extension Cards 11
3 6 4 Power Requirements 12
4. Powering On the Base Unit with its Extension Cards .................................................... 3
5. Check Card Detection on the Embedded Web Page ................................................ 4
5 1 Connecting to the Embedded Web Server 14
5 2 Detected Cards Displayed in the System Page 14
Revision .............................................................................................................................. 5
Revision History 15
Page 2 / 15 eWON Flexy Single Ethernet Ext Card FLX3101 | IG 017
Chapter
Product Summary
. Product Summary
The present Installation Guide describes the hardware of the Single Ethernet Extension Card
FLX 3101 of the eWON Flexy family
The eWON Flexy family is a range of modular industrial gateway/router
As the name eWON Flexy suggests, it has been designed to enable numerous different
combinations of Extension Cards and Base Units The present Installation Guide is focusing on
an extension card which, as such, needs to be inserted in one of the Base Units in order to
work The Base Units have their individual Installation Guide IG-014-0-EN “eWON Flexy - Base
Units” The present guide addresses shortly how the Extension Cards integrate the Base Units
and we give some recommendations to mount them (see § 3 6 Plugging the Extension Card
into the Base Unit)
Page 3 / 15 eWON Flexy Single Ethernet Ext Card FLX3101 | IG 017
Chapter 2
Safety, Environmental & Regulatory Information
2. Safety, Environmental & Regulatory Information
2. . Scope
The present heading addresses Safety, Environmental & Regulatory Information for the
Single Ethernet Extension Card FLX 3101 This Extension Card is basically belonging to the
same compliance frame than the Base Units
2.2. ESD Damage Prevention
- Caution -
Contains parts and assemblies susceptible to damage by electrostatic discharge (ESD). Always
use ESD precautions when handling Extension Cards and the opened Base Unit.
The Extension Card described in the present Installation Guide is a module exposing both
sides of an electronic printed circuit board Therefore, it is packed in antistatic ESD bags In
order to avoid ESD damage, the product must be handled with the necessary precaution
including:
•Grounded ESD protective work surface
•Personnel grounding
2.3. Applicable Directives, Standards and Compliance
The Extension Card described in the present Installation Guide belongs to class A
Information Technology Equipment (ITE) In a domestic environment this product may cause
radio interference in which case the user may be required to take appropriate measures
2.3. . Applicable European Directives
The Extension Card described in the present Installation Guide is in conformity with the
following EC directives:
•RoHS Directive 2011/65/EU
•EMC Directive 2004/108/EC
2.3.2. Applicable Safety Standards
The Extension Card described in the present Installation Guide is in conformity with the
following safety standards:
•IEC/EN 60950-1
•UL 60950-1
•CSA-C22 2 No 60950-1-07
Page 4 / 15 eWON Flexy Single Ethernet Ext Card FLX3101 | IG 017
Chapter 2
Safety, Environmental & Regulatory Information
2.3.3. FCC Compliance
The Extension Card described in the present Installation Guide complies with Part 15 of the
FCC Rules
Operating is subject to the following two conditions:
•This device may not cause harmful interference, and
•This device must accept any interference received, including interference that may
cause undesired operation
2.3.4. Certifications
The Extension Card described in the present Installation Guide has been certified by
authorized bodies:
•UL Certificate Of Compliance (COC) # E350576
•CB certificate # DK-29479-M1-UL
These certificates can be downloaded as PDF files on the eWON Support web site:
http://ewon biz/support/docs/flexy
Page 5 / 15 eWON Flexy Single Ethernet Ext Card FLX3101 | IG 017
Chapter 3
Hardware Description
3. Hardware Description
3. . Mechanical Layout and Interfaces
Ethernet Port Connector RJ45 - 10/100 Base-T
Back-plane connector
Page 6 / 15 eWON Flexy Single Ethernet Ext Card FLX3101 | IG 017
Chapter 3
Hardware Description
3.2. Extension Card Label
3.2. . Label Location and Information Included
The identification label of the extension cards is placed on the left hand side (solder side of
the PCB)
The different parts of the label are described below:
PN
Part Number:
identifies the type of the card
Description see 3 2 2 Part Number
Structure for Extension Cards
SN
Serial Number
Structure of the Serial Number
1111-2233-0001-44
1111 = MTID (product related)
2233 = Year Week
0001 = sequential mfg order
44 = product type
MAC MAC-Address
of the Ethernet card
Marks CE, UL, certificate number and logos
if applicable
Page 7 / 15 eWON Flexy Single Ethernet Ext Card FLX3101 | IG 017
Chapter 3
Hardware Description
3.2.2. Part Number Structure for Extension Cards
FLX 3 0 _00
FL FL is the prefix for the extensions of
the eWON Flexy family Only FL (constant)
X
1 alphabetic sign (CAP)
Defines the slots of the base module
in which the extension can be
inserted See also § 3 6 1 Base Unit
Slot Compatibility
A 2 first slots only ●●○○
B 2 last slots only ○○●●
X In any slot ●●●●
3101_00 Single Ethernet Extension Card The suffix _00 is used for software options
3.3. Front Panel LEDs
Item Mark Function Picture
LNK
ON
Link ETH 10/100 present
+ Speed indication
Green = 100 Mbps
Amber = 10 Mbps
ACT Flashing Green
Packets transfer activity
Page 8 / 15 eWON Flexy Single Ethernet Ext Card FLX3101 | IG 017
Chapter 3
Hardware Description
3.4. Ethernet Port Specifications
Characteristic Value
Ethernet Port 10/100Mbps
Default IP mode Static
Default IP address (WAN) 10 1 0 53
Default Subnet Mask 255 255 255 0
3.5. eWON Flexy Extension Cards Environmental Conditions
Characteristic Value
Operating temperature -25 to +70 °C
Storage temperature -40 to +70 °C
Relative humidity 10 to 95% non-condensing
Operating altitude Up to maximum 2000m
Storage altitude Up to maximum 3000m
3.6. Plugging the Extension Card into the Base Unit
3.6. . Base Unit Slot Compatibility
The Single Ethernet Extension Card (FLX 3101) can be inserted in all slots of the Base Unit
Explanation:
The Flexy Base Units feature two type of slots The A slots are the two first slots starting from
the left The B slots are the two last slots Some cards fit in A and B slots Some not Cards that
fit only one type of slot have a mechanical mistake-proof security
Page 9 / 15 eWON Flexy Single Ethernet Ext Card FLX3101 | IG 017
Chapter 3
Hardware Description
The reference code of the Extension Cards includes a letter that defines their compatibility
either with “A” slots, “B” slots or both:
•FLA xxxx - designates cards that fit into “A” slots
•FLB xxxx - designates cards that fit into “B” slots
•FLX xxxx - designates cards that fit into both “A” and “B” slots
In addition to the card reference, each type of extension card bears a visual compatibility
symbol on its front panel The visual symbols are shown in the table below:
●●○○ 2 first slots only (A)
●●●● In any slot (X)
○○●● 2 last slots only (B)
3.6.2. Extension Card Insertion
Please wait 30 seconds after powering off the equipment before inserting (or removing) an
extension card This is to avoid possible damage to the Base Unit and Extension Card
Remove the slot filler of the location where you want to insert the new card To do this, press
on both ends of the cover, note that the hooks (1) are out-centered like shown on the
pictures
Page 10 / 15 eWON Flexy Single Ethernet Ext Card FLX3101 | IG 017
Table des matières
Autres manuels eWON Carte réseau
Manuels Carte réseau populaires d'autres marques
3Com
3Com EtherLink 3C509B Manuel utilisateur
TRENDnet
TRENDnet TEG-PCITX Manuel utilisateur
Cisco
Cisco MC16E Manuel utilisateur
Delta Electronics
Delta Electronics Braking Modules VFDB Series Manuel utilisateur
TwinMOS
TwinMOS Booming Manuel utilisateur
Dialogic
Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur
National Instruments
National Instruments NI 9234 Manuel utilisateur
Hama
Hama 49276 Manuel utilisateur
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation
Compaq
Compaq Wireless LAN 100 Manuel utilisateur
Bose
Bose PowerMatch Dante Manuel utilisateur