USER GUIDE
10
• This unit has been designed and tested
in accordance with IEC 61000-6-3 and
IEC 61000-6-2, however the installer
is responsible for ensuring that all local
regulations and standards are complied
with.
• This product is to be installed and serviced
only by Evnex approved technicians using
only Evnex supplied parts.
• There are no user serviceable parts inside
the EV charger.
• Do not attempt to repair or modify the
product.
• It is the user’s responsibility to ensure
that the cable is stored safely, and not left
where it could become a tripping hazard,
or subject to stress or damage.
• This EV charger should only be used to
charge a vehicle with a compatible J1772
socket, or IEC 61851 type 1 or type 2
socket.
• Only cables which comply with IEC
62196-1 and IEC 62196-2 may be used
with this product.
• The vehicle and charging cable shall be
used as per the manufacturers instructions.
• The vehicle’s on-board charger is required
to comply with IEC 61851-1 and
IEC 61851-21-1.
• Avoid excessive application of moisture to
charging cable connectors, e.g. washing
with hose.
• Do not use harsh chemicals to clean this
product. Periodic cleaning may be done
with a damp cloth and mild detergent if
required.
• Product and warning labels must not
be removed.
• Read all instructions before using
this product.
• If this product appears to be damaged in
any way, it should be electrically isolated
and repaired or replaced. Damage
includes fraying or broken insulation on the
power cable or any signs of cracking or
separation on the connector or charging
unit.
• This product should not be operated while
in a “Fault” state and should be electrically
isolated until serviced by a qualied
technician.
• Never insert foreign objects in the
charging cable connectors.
• Do not use extension cords or any kind of
adapter with this product.
• This product should not be used by
children.
Evnex Limited shall not be liable in
any way for damage or injury that
occurs when using the product, and all
warranties will be void where:
• The installation instructions have not
been followed correctly.
• The product has been installed by an
unqualied person.
• The product has been tampered with
or modied.
• The product has been used for a
purpose other than it was designed and
intended for.
General information Risk of electric shock
Disclaimer
