Everidge Thermalrite Manuel utilisateur
ThermalRite Blast Chiller Easy Touch Screen Manual
Blast Chiller Touch Screen
Operation and Care Manual
Rev02132016
THERMALRITE
2
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
TABLE OF CONTENTS
1. Powering up the Touch Screen Control ..................................................4
2. Setting Up The Control ......................................................................... 5
2.1. What Needs to Be Done before Using the Blast Chiller............................5
3. The More Screen.................................................................................. 6
3.0. Hold Setting....................................................................................... 6
3.1. Thawing Option ..................................................................................7
3.2. Sterilization........................................................................................ 9
3.3. Defrost............................................................................................ 10
3.4. Heated Probe................................................................................... 11
3.5. Service ............................................................................................12
4. The Options Screen............................................................................ 13
4.0. Language .........................................................................................13
4.1. Date/Time ........................................................................................14
4.2. Display Menu....................................................................................15
4.3. USB Port.......................................................................................... 16
4.3.1. Touch Scree Software Update...................................................18
4.3.2. Firmware Update.....................................................................18
4.3.3. Software Update (Parameters Only)...........................................22
4.3.4. Software Update (Both Softwareand Parameters). .................... 28
4.4. Alarm List .........................................................................................34
4.5. Defrost List .......................................................................................35
4.6. HAACP ............................................................................................ 37
4.6.1. Download HACCP Data ........................................................... 38
4.6.2. Using Proprietary Software to Track HACCP Data........................41
4.6.3. How to Save the HACCP Files as an EXCEL File............................45
4.7. I/O.................................................................................................. 46
4.8 Password......................................................................................... 48
4.9. Help ................................................................................................ 49
5. The Blast Chilling Mode.......................................................................50
5.1. Blast Chilling Manual Program............................................................53
5.2 Blast Chilling Automatic Recipes.........................................................54
5.3. Blast Chilling Custom Recipes.............................................................58
5.4 Cycle Graph and Other Functions ........................................................63
5.5. Alarm List .........................................................................................67
5.6. I/O Menu......................................................................................... 69
5.7. Energy Menu. ...................................................................................70
5.8. Cycle End. ........................................................................................71
5.9. Automatic Holding Cycle....................................................................72
6. Blast Freezing Mode ........................................................................... 72
7. Service.............................................................................................. 74
3
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
7.0. Access the ServiceMenu.....................................................................74
7.1. How to Changea Parameter...............................................................75
7.2. Parameter List ................................................................................. 77
7.3. Parameters Restore ...........................................................................82
7.4. Door Openings................................................................................. 84
7.5. Scanner........................................................................................... 85
7.6. Serial Number...................................................................................87
7.7. Optional Menu ..................................................................................88
7.8. Maintenance Menu............................................................................89
7.9. Cal ( Display Calibration.....................................................................90
7.9.1. Test Cal (DisplayCalibration Test).............................................92
Notes. .......................................................................................................93
4
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
1. Powering up the Easy Touch Screen Control
This is the Stand-By screen or the power off mode. To begin, push and hold the Power
Button for 5 seconds, until you see the Status Bar move to the right and it will say
“Please wait”.
The control will initialize and load the software, please allow 15 seconds for it to
complete. This the Home screen. From this screen you can Blast Chill, Blast Freeze or
access the More menu. You can power down the controller by pressing the ON/OFF icon
on the lower right hand corner.
72˚ F
5
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
2. Setting Up the Control
To ensure that the Blast Chiller and its function operate as designed, you will need to
set up the control for the first time. This will allow you to accurately provide data for
troubleshooting and HAACP documentation.
➢
Language
✓
Options 4.0.
➢
Date and Time
✓
Options 4.1.
➢
Display
✓
Options 4.2.
3. The More Screen
From this screen you can access the Options menu, Service menu, turn the Heated
Probe off or on (optional), set the Hold temperature, start a Thawing cycle, turn on the
UV Sterilization Light (optional) or start a Manual defrost cycle.
6
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
3.0. The Hold Mode
To select the Hold option, press the Hold icon.
To change the Hold temperature, press the Air Temperature tab, the tab will turn Blue
and you can select a temperature from -40°F(-40°C) to 48°F(8°C). Once you have
selected a temperature, press OK and the cycle will begin. If no temperature is selected
or a temperature is selected outside of the range and start is pushed, the tab will turn
Red and not allow you to continue until a correct temperature is selected.
7
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
This is the graph that will be shown during the HOLD cycle. This cycle will run until the
Red Stop icon is pushed and the cycle is stopped.
3.1. Thawing Mode
The Thawing function, when applicable, will provide a gentle heating of the cabinet with
a lower fan speed and a special heating system, to allow quick thawing of a frozen
product.
8
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
The air temperature can be set within a range of 32°F(0°C) to 77°F(25°C). The Product
Probe can be also used to run a product temperature based cycle, providing a visual
notification from the display when the product is thawed. Or it can be set to run a time
based cycle for a predetermined time. Press the Green Start icon to start the process.
To allow the Product Probe to be used, push the tab with the Red X and and a Green
Checkmark will appear. The Time option will disappear and you can then set your
Product Probe temperature.
9
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
This is the graph that will appear during the Thawing cycle. Once the Thawing cycle
hits the Set temperature for the Product Probe or the Time has expired, the unit will
then switch to the Hold mode. This cycle will run until the Red Stop icon is pushed and
the cycle is stopped.
3.2. Sterililization Mode
The Sterilization cycle is an optional feature, using a special UV-Lamp process to kill
bacteria in the Blast Chiller cabinet. This cycle provides an additional boost to the
normal cleaning procedure.
10
Rev02132016
ThermalRite Blast Chiller Easy Touch Screen Manual
The Sterilization cycle will run for 300 seconds ( 5 minutes) or untill the Red Stop
icon is pushed.
3.3. Manual Defrost Mode
You can select a Manual Defrost from this screen by pressing on the Manual
Defrost tab.
The Manual Defrost cycle is programmed to run for 10 minutes or until the evaporator
temperature reaches 46°F (8°C).
Table des matières
