Everet EVP230N Manuel utilisateur
EVERET EVP230N
FHD NDI PTZ Video Camera 30X zoom
User Manual
Version V1.0
（English)
CONTENT
SAFETY GUIDES 2
PACKING LIST 3
QUICK START 3
1. Check all cable connections before power on. 3
2. Dial Switch Settings (at the bottom of the camera) 4
PRODUCT HIGHLIGHTS 5
TECHNICAL SPECIFICATIONS 6
CAMERA INTERFACE 8
CAMERA DIMENSIONS 8
IR REMOTE CONTROLLER 9
VISCA IN（RS232 PORT) 11
VISCA PROTOCOL 13
PART1 CAMERA RETURN COMMAND 13
PART2 CAMERA CONTROL COMMAND 13
PART3 CAMERA CONTROL COMMAND 19
VISCA PAN TILT ABSOLUTE POSITION VALUE 22
VISCA PAN TILT SPEED VALUE 23
PELCO-D PROTOCOL COMMAND LIST 24
PELCO-P PROTOCOL COMMAND LIST 25
OSD MENU 26
IP ADDRESS SETTING 30
WEB SETTINGS 31
HOW TO UPDATE 35
GETTING STARTED WITH NDI 37
NDI TOOLS 37
VISCA OVER IP 38
HOW TO USE VISCA OVER IP 38
1 WWW.EVERETIMAGING.COM
SAFETY GUIDES
1.Before operation, please fully read and follow all instructions in the manual.
2.For your safety, always keep this manual with the camera.
3.The camera power input range is 100-240 VAC (50-60Hz), ensure the power supply input
within this rate before powering on.
4.The camera power voltage is 12VDC, rated currency is 2A. We suggest you use it with the
original power supply adapter supplied by the factory.
5.Please keep the power cable, video cable and control cable in a safe place. Protect all
cables especially the connectors.
6.Operational environment: 0℃-50℃, humidity less than 90%.To avoid any danger, do not
put anything inside the camera, and keep away from the corrosive liquid.
7.Avoid stress, vibration and damp during transportation, storage and installation.
8.Do not detatch the camera housing and cover. For any service, please contact authorized
Everet technicians.
9.Video cable and control cable should be individually shielded, and cannot be substituted
with other cables.
10.Do not direct the camera lens towards strong light, such as the sun or the intensive light.
11.Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning agent
when there is need to clean. To avoid damage on the camera lens, never use strong or
abrasive cleaning agents on the camera housing.
12.
Do not move the camera by holding the camera head. To avoid mechanical trouble, do not
rotate the camera head by hand. NEVER MOVE THE CAMERA MANUALLY WHEN IT IS
WORKING.
13.Put the camera on fixed and smooth desk or platform,
avoid leaned installation.
14.Power Supply Polarity (Drawing)
Note:
The video quality may be affected by the specific frequencies of
electromagnetic fields.
Never grasp the head of the camera, and never move the camera by hand when it is working,
otherwise the camera will breakdown.
2 WWW.EVERETIMAGING.COM
PACKING LIST
Check all bellow items when open the package:
Camera
1
Power Adapter
1
Power Cable
1
RS232 Control Cable
1
USB 3.0 Cable
1
Remote Controller
1
QUICK START
1. Check all cable connections before power on.
3 WWW.EVERETIMAGING.COM
2. Dial Switch Settings (at the bottom of the camera)
Dial Switch（ARM）
SW-1
SW-2
Instruction
1
OFF
OFF
Updating mode
2
ON
OFF
Debugging mode
3
OFF
ON
Undefined
4
ON
ON
Working mode
Dial Switch
SW-3
SW-4
Instruction
1
OFF
OFF
reserve
2
ON
OFF
reserve
3
OFF
ON
reserve
4
ON
ON
reserve
Dial Switch (USB)
SW-5
SW-6
Instruction
1
OFF
OFF
Undefined
2
ON
OFF
Working mode
3
OFF
ON
Updating mode
4
ON
ON
Undefined
4 WWW.EVERETIMAGING.COM
PRODUCT HIGHLIGHTS
●Sony 1/1.7 inch 12MP sensor providing FULL HD video resolution
●High Quality Full HD lens with 30x Optical Zoom + 2x Digital Zoom, with 60 degree
field of view
●NDI|HX, 3G-SDI, HDMI output video simultaneously
●NewTek NDI v4.0 video transmission and control
●IP Video Streaming, includes both H.264, H.265 video encoding
●White Balance, Exposure, Focus, Iris can be adjusted automatically or manually
●Power over Ethernet (PoE) support: get video, control, tally and power supply with
one CAT5/6 cable
●Built-in tally light
●3.5mm Audio Input
●Special Focusing Algorithm: fast and precise focusing performance when zooming or
moving
●Smooth PTZ mechanical design, accurate pan tilt motor control
●128 presets supported
●Standard Sony VISCA, VISCA over IP, PELCO-P, PELCO-D control protocol; IP VISCA
over both TCP and UDP
●Daisy chain supported, max 7 cameras connected in VISCA protocol
●Image flip function, support upside-down installation
●Supplied with functional IR remote controller
●Fast video format switch: less than 3 seconds
●Supported field upgrade for ISP, ARM, FPGA and USB
●Support RS232/RS485/UVC control
●Standard UVC1.5 protocol, seamlessly compatible with major video conferencing
software and platform
●OSD menu in English, IP address, streaming resolution and size can be set in OSD
menu
5 WWW.EVERETIMAGING.COM
TECHNICAL SPECIFICATIONS
Video Format
HDMI
(V1.4)
1920*1080P60/50/30/25/59.94/29.97/24
1920*1080I60/50/59.94
1280*720P60/50/30/25/59.94/29.97
SDI
1920*1080P60/50/30/25/59.94/29.97/24
1920*1080I60/50/59.94
1280*720P60/50/30/25/59.94/29.97
NDI
Main stream
1920*1080@60,
Sub stream:
1280*720@30
1024*576@30
640*360@30
Video Interface
HDMI V1.4), SDI, NDI|HX
Audio In
3.5mm Line-in Audio (embedded in IP and NDI)
Sensor
CMOS sensor 1/7” 12.4MP
Zoom
F5.8～203mm(35X), F1.5 – 4.8. View Angle:60°(Far)-2.02°(Near)
Rotation Angle
Pan: -170° ~ +170°; Tilt: -30° ~ +90°
Rotation Speed
Pan: 0°~120°/s ; Tilt: 0°~80°/s
Preset:
Remote controller: 10; RS232: 128; Accuracy: 0.1°
Control Port
RS232, RS485(optional), NDI|HX (VISCA over IP)
Network Speed
1000M
Video encode
H.264/H.265(default: H.264)
Bit Rate Control
Variable Bit Rate, Constant Bit Rate
Video Bit Rate
0Kbps~15360Kbps
IP Protocol
TCP/IP, HTTP, RTSP, DHCP ,RTMP, Onvif
POE
Supported
Daisy Chain
Support RS232 serial daisy chain
Minimum Lux
0.1lux
White Balance
Auto/Indoor/Outdoor/Manual/Outauto/Sodium Lamp Auto/Sodium Lamp
6 WWW.EVERETIMAGING.COM
Exposure
Auto/Manual/Bright/Shutter/Iris
Focus
Auto / Manual
Iris
Auto / Manual
Electric Shutter
Auto / Manual
Gamma
Supported
WDR
Supported
BLC
Supported
2D Noise
Reduction
Supported
3D Noise
Reduction
Supported
Anti Flicker
OFF/50Hz/60Hz
PanTilt Flip
Supported
Input Voltage
DC12V/POE
Dimension
220mm×190mm×205.8mm
Net Weight
1.5KG
7 WWW.EVERETIMAGING.COM
CAMERA INTERFACE
1.Camera Lens
2.Camera Base
3.IR Receiver Panel
4.Power Indicator Light
5.Dial Switch
6. Tripod Screw Hole
7. Installation Hole
8. RS232 control port (input)
9. RS232 control port(output)
10. HDMI port
11.3G-SDI port
12, 3.5mm Audio In
13, RJ45 port (IP&NDI)
14. DC12V plug
CAMERA DIMENSIONS
8 WWW.EVERETIMAGING.COM
IR REMOTE CONTROLLER
POWER
Under normal working mode, short press
POWER key, to enter standby mode;
Press it again, the camera will do
self-configuration, then go back to HOME
position.
It will go to preset position if power on model
has been set before.
FREEZE （Not Supported in USB）
Short press FREEZE key to freeze/ unfreeze the
image.
IRT (IR Transfer/IR Pass)
Open / close the IR pass function. Once press
the IRT key, the camera will receive and
Pass the IR remote control signal to the
codec/terminal (via VISCA IN port).
SET 1~SET4 ADDRESS SETTING
Long press for 3 seconds until the key light ON,
to set camera address.
CAM1~CAM4（CAMERA SELECTING）
Short press to select the relative camera.
PRESET NUMBER KEY (1-9)
Set preset: long press (3 seconds) the number
key to set preset.
Run preset: Short press the number key to run
preset.
CLR PRE (CLEAR PRESET)
CLR PRE+ number key:
to clear the relative preset.
Long press to clear all presets.
9 WWW.EVERETIMAGING.COM
Table des matières
Autres manuels Everet Caméra de sécurité
