Event 2030 Manuel utilisateur
709-950-1-1_2030_usermanual.indd 1709-950-1-1_2030_usermanual.indd 1 12/03/2012 12:03:58 PM12/03/2012 12:03:58 PM
important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. This is a Class I product and shall be connected to a MAINS socket outlet with a protective earthing
connection.
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
12. Only use attachments/accessories specified by the manufacturer.
13. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
14. Unplug this apparatus during lightning storms or when unused for long periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
16. Keep packaging out of reach of children.
17. Take care when lifting the speaker.
18. The Event 2030 is a precision monitoring tool capable of producing high sound pressure levels that
could cause permanent hearing loss.
Please exercise caution when listening, ideally using an SPL meter to monitor output levels.
19. Never touch the heatsink while in operation. Never cover the 2030 while turned on. Ensure there is
suitable ventilation around the rear of the cabinet for heat dissipation.
20. The appliance coupler shall remain operable once the product is installed.
21. Warning - To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
22. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
23. The 2030 is a free-standing speaker and is designed for operation on open surfaces such as speaker
stands or a work surface. Do not operate the 2030 within cabinets or any enclosed space with limited
ventilation.
709-950-1-1_2030_usermanual.indd 2709-950-1-1_2030_usermanual.indd 2 12/03/2012 12:05:21 PM12/03/2012 12:05:21 PM
important safety instructions
1515
18 19
512
1716
709-950-1-1_2030_usermanual.indd 3709-950-1-1_2030_usermanual.indd 3 12/03/2012 12:05:22 PM12/03/2012 12:05:22 PM
709-950-1-1_2030_usermanual.indd 4709-950-1-1_2030_usermanual.indd 4 12/03/2012 12:05:25 PM12/03/2012 12:05:25 PM
introduction
Thank you for purchasing the Event 2030. Before you set up your speakers for the first time, please read
through this user guide.
The Event 20/20 pedigree needs no introduction. As the speaker family that made studio monitoring
accessible to countless artists and engineers, it has become a household name and is a staple in studios the
world over. Now the time has come to build upon this legendary speaker platform, with the 2030 three-way
studio monitor system.
The 2030 is a category defining three-way studio monitoring system that combines three discrete drivers to
allow for incredibly accurate reproduction of the entire audio spectrum.
The 2030 borrows heavily from the technology developed for the Event Opal, incorporating fully discrete
Class AB amplifiers for the mid-high assembly and woofer that provide up to 240 watts of burst power with
less than .02% total harmonic distortion, providing higher dynamic range which is maintained as the output
level is increased. This behaviour is due to the incomparable “soft clipping” nature of the 2030s Class AB
topology; audio playback is unfettered and remains unmasked by the distortion and inter-modulation
artifacts produced by less sophisticated amplifier designs.
Please take the time to visit www.eventelectronics.com and register your 2030 monitors.
709-950-1-1_2030_usermanual.indd 5709-950-1-1_2030_usermanual.indd 5 12/03/2012 12:05:30 PM12/03/2012 12:05:30 PM
2030 BAS - front
mid range driver
tweeter low resonance speaker baffletuned waveguide
woofer illuminated LED power indicator
709-950-1-1_2030_usermanual.indd 6709-950-1-1_2030_usermanual.indd 6 12/03/2012 12:05:32 PM12/03/2012 12:05:32 PM
2030 BAS - rear
signal input (balanced xlr)rear firing port heatsink
mains voltage selector
rear panel controls
(see next page)
mains input
mains switch
709-950-1-1_2030_usermanual.indd 7709-950-1-1_2030_usermanual.indd 7 12/03/2012 12:05:38 PM12/03/2012 12:05:38 PM
rear panel controls
SIGNAL INPUT
The 2030 requires the input of an
industry standard XLR style cannon jack.
GAIN
Allows for modification of the input
sensitivity, from -12dB to +12dB in
regards to the reference sensitivity of
0.775v RMS. The default setting is 0.
HF SHELF
Allows for the implementation of a
shelving filter at 2kHz. The boost and cut
is variable between +/– 3dB. The default
setting is 0 - filter not engaged.
LF SHELF
Allows for the implementation of a
shelving filter at 200Hz. The boost and
cut is variable between +/– 3dB. The
default setting is 0 - filter not engaged.
709-950-1-1_2030_usermanual.indd 8709-950-1-1_2030_usermanual.indd 8 12/03/2012 12:05:43 PM12/03/2012 12:05:43 PM
mains power
MAINS SWITCH
Use the Mains Switch to turn the 2030
on or off.
MAINS INPUT
Connect the mains supply here. Ensure
that you use only the cable supplied or
a genuine Event replacement. Note that
the amplifier is not entirely disconnected
from mains power unless this cable is
completely disconnected.
MAINS VOLTAGE SELECTOR
Please note, that as the 2030 is not fixed
to operate in the voltage range of the
region that it is sold in, extra care must
be taken before connecting the mains
power.
Please ensure that the voltage selector
is set to the correct voltage for your
region, and that the correct fuse
is installed. Damage caused by an
incorrect voltage setting will not be
covered under warranty.
709-950-1-1_2030_usermanual.indd 9709-950-1-1_2030_usermanual.indd 9 12/03/2012 12:05:44 PM12/03/2012 12:05:44 PM
unpacking your speakers
We understand that you may be eager to unpack your new Event 2030s,
but please be careful when unpacking the speakers. Your new studio
monitors have been carefully inspected, tested and packed by our quality
control engineers prior to shipping. Please take care at each stage of
unpacking.
The Event 2030 features an aluminium alloy dome tweeter, which may
be easily damaged by hands when removing the speaker from the
packaging.
Once you have successfully unpacked your new speakers, please store all
packaging material in a safe place for future transport of your speakers.
To prevent damage, do not touch the aluminium alloy tweeter dome
709-950-1-1_2030_usermanual.indd 10709-950-1-1_2030_usermanual.indd 10 12/03/2012 12:05:44 PM12/03/2012 12:05:44 PM
Table des matières
Autres manuels Event Intervenants
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur