Eurotech INONET Concepion-hX Manuel utilisateur

SYSTEM DOCUMENTATION

Concepion®-hX - 10. Gen.

System Documentation

Table of contents

1 General instructions

2 Installation instructions

3 Product description

4 Service and support

5 Maintenance

6 Appendix

System Documentation

1. Notes

1.1 Notes on the documentation

This documentation is intended exclusively for qualified personnel of the

control and automation technology, which is familiar with the applicable

standards. For the installation and commissioning of the components, it is

absolutely necessary to observe the following instructions. Read the manual

completely before first use and keep it in a safe place for later use.

1.2 Qualified personnel

The associated device/system may only be set up and operated in connection

with this documentation. Commissioning and operation of a device/system

may only be carried out by qualified personnel. Qualified personnel within the

meaning of the safety instructions of this documentation are persons who

have the authority to use, to ground and to identify devices, systems and

circuits in accordance with the standards of safety technology.

1.3 Intended use

The flawless and safe operation of the product requires proper transport,

proper storage, installation and assembly as well as careful operation and

maintenance.

1.4 Liability conditions

The qualified personnel must ensure that the application or use of the

described products complies with all safety requirements, including all

applicable laws, rules, regulations and standards.

The documentation has been carefully constructed. However, the products

described are constantly being further developed. Therefore, the

documentation is not in all cases completely checked for compliance with the

described performance data, standards or other characteristics. None of the

explanations contained in this manual constitute a guarantee within the

meaning of §443 of the German Civil Code (BGB) or an indication of the use

required under the contract as defined in §434 Para. 1 Sentence 1 No. 1 of

the German Civil Code (BGB). If it contains technical errors or typographical

errors, we reserve the right to make changes at any time without notice. No

claims for changes to products already supplied can be made on the basis of

the information, illustrations and descriptions in this documentation.

System Documentation

1. Notes

party use of this publication, in whole or in part, is prohibited without written

permission. All trademarks mentioned are the property of their respective

owners. Errors excepted.

1.5 Explanation of the security symbols

This manual contains information that you must observe for your own safety

and to avoid material damage. The indications on personal safety are

highlighted by a warning triangle, indications of material damage are without

warning triangle. Depending on the level of risk, the warnings are shown in

descending order as follows:

If multiple levels of risk occur, the warning is always used for the highest

level. If a warning triangle warns you of a personal injury, you may also be

alerted against damage in the same warning message.

DANGER

means that death or serious bodily injury will occur if the

appropriate precautions are not taken.

WARNING

means that death or serious bodily injury may occur if the

appropriate precautions are not taken.

CAUTION

with warning triangle means that without the appropriate

precautions a slight bodily injury can occur.

NOTE

provides general information related to the operation of the

system.

CAUTION

without a warning triangle means that without the appropriate

precautions, material damage can occur.

ATTENTION

means that an undesirable result or condition may occur if the

corresponding notice is not observed.

System Documentation

1. Notes

1.6 Basic safety instructions

1. Observe safety instructions

Be sure to read the safety instructions before starting the

operation.

2. Proper use

Electronic devices are generally not fail-safe. In the event of a

failure of the operating or control device or a non-disruptive

power supply, the user is responsible for ensuring that connected

devices, such as motors, are placed in a safe state.

3. Checking the mains voltage

Check that the supply voltage matches the voltage requirement

indicated on the unit. If you are unsure of the mains voltage and

mains frequency for the power supply at the installation location,

contact your electrician or your electricity plant.

4. Disconnect the mains voltage

Even when switched off, some parts of your computer system

may have power in the interior.

5. Grounded products

Certain products are equipped with a mains plug with a grounding

cable. This plug can only be plugged into a socket with grounding

line. Contact your electrician if the outlet is not suitable for the

plug and may need to be replaced. Do not attempt to tamper with

the Plug and therefore override the safety feature.

6. Opening the device

Always disconnect the power plug before opening the device. Do

not open any parts that are labeled "do not open".

7. Installation

The installation of the device must be carried out in accordance

with local/regional electrotechnical regulations for the installation

of data processing facilities by qualified and authorized personnel.

System Documentation

1. Notes

8. Repairs

Repairs to your computer system may only be carried out by

specially trained qualified personnel. Only use original spare parts

and accessories for repairs.

9. Security check

After servicing or repairing the product, ask the technician to

perform safety checks to make sure that the product is working

properly.

10. Inserting objects

Never insert objects into the inside of the device by opening a

device, as they could hit components that are under voltage or

cause a short circuit. This can lead to fire or life-threatening

electric shock.

11. Transport and storage

In the case of transport and storage, the equipment must be

protected against undue stresses (mechanical load, temperature,

humidity, aggressive atmosphere).

12. Moisture

Avoid persistent, extreme humidity and condensation. Protect the

device from splashing water and chemicals. Do not operate the

device if the humidity is outside the limits specified in the user

manual.

13. Liability

The manufacturer assumes no liability for any damage caused by

non-observance of the operating instructions.

System Documentation

1. Notes

1.7 Duty of care of the operator

The operator must ensure that

the industrial PC is only used as intended.

the industrial PC is operated only in perfect working condition.

the operating instructions are always in a legible state and completely

available at the location of the industrial PC.

only adequately qualified and authorized personnel will service, maintain

and repair the Industrial PC.

this staff is regularly trained in all applicable issues of occupational safety

and environmental protection, as well as the operating instructions and in

particular the safety instructions contained therein.

all safety and warning notices attached to the industrial PC are not

removed and remain legible.

Only qualified personnel are allowed to open the housing of the

Industrial PC!

The operator shall ensure that only sufficient qualified and authorized

personnel open the housing.

1.8 Operating personnel requirements

Every user of the industrial PC must have read these operating

instructions and know all the functions of the software installed on the

PC.

System Documentation

2. Installation

2.1 Transport

Despite the robust construction of the industrial PC, the built-in components

are sensitive to heavy shocks and vibrations. Therefore, protect your systems

from heavy mechanical loads during transport. Please use the original

packaging for shipping.

When transporting in cold environments or when the device is exposed

to extreme temperature differences, ensure that no moisture (condensation,

condensed water etc.) is reflected by and in the appliance. This means that

the unit is only slowly able to adjust to the room temperature before it can be

put into operation again. At condensation, the device must be switched on

again at the earliest after 12 hours. Non-compliance can cause serious

damage to the hardware!

Be careful and do not lift heavy loads without assistance. Please carry

loads between 18 kg and 32 kg by two, loads from 32 kg to 55 kg by

three persons. Loads greater than 55 kg should be transported by

driving.

2.2 Unpacking

When unpacking the device, observe the following points:

Remove the packaging.

Check the contents of the packaging for visible transport damage.

Check the delivery for completeness.

However, keep the packaging for possible re-transport.

Be sure to keep the supplied documents, they are required for initial

startup and belong to the device.

If you notice any transport damage or discrepancies between the

contents of the packaging and your order, please inform us

immediately.

2.3 Surrounding and environmental conditions

When planning your system, consider the following points:

Observe the climatic and mechanical environmental conditions in the

technical data of the operating instructions.

Avoid extreme environmental conditions as far as possible.

Protect your equipment from moisture, dust and heat, as well as shock

and vibration.

Do not expose your system to direct sunlight.

System Documentation

2. Installation

The system is to be installed professionally so that no danger (e.g. by

overturning) can go out of it.

There must remain a free space of at least 50 mm in the area of the

ventilation slots, so that the industrial PC is adequately ventilated.

2.4 Extension/upgrading of the system

Should your system be equipped with your own expansion cards,

please observe the maximum power consumption as specified in the

appendix "Technical data". We point out that no liability is taken over by

InoNet in case of damages in connection with the installation of add-on cards.

It is also essential to pay attention to ESD damage protection!

Please also note the additional manuals included with the expansion

cards.

System documentation

2. Installation

2.5 Setting up/installing the system

When setting up the computer system, make sure that an

unobstructed air flow to the cooling fins of the system is ensured. This way,

optimal cooling of the PC is ensured.

2.6 Requirements for commissioning

Before you switch on the system, the peripheral devices mouse,

keyboard, monitor as well as the power supply must be connected.

The device must be slowly adjusted to the room temperature before it

is allowed to be put into operation. In case of condensation, the device may

only be switched on after a waiting period of at least 12 hours (see chapter

2.1 Transport).

2.7 Connecting devices

Non-hot-pluggable peripherals may only be connected when the PC is

switched off.

The information in the descriptions of the peripheral devices must be

followed exactly.

Connect the keyboard and mouse to the connectors of the device. If

necessary, secure the cables against unintentional disconnection.

Connect the monitor cable to the connector of the graphics port. Hand-

tighten the screws of the monitor cable.

Check that the local mains voltage corresponds to the connection values of

the system.

Connect the computer and the monitor to your power supply using the

enclosed power cables.

2.8 Switching on for the first time

Before commissioning, please read the entire operating instructions and pay

particular attention to the safety instructions in Chapter 1.6. Basic safety

instructions.

Turn on the monitor.

Press the on/off button of the computer. The Power LED should now be lit.

Table des matières

Autres manuels Eurotech Ordinateur de bureau

Eurotech

Eurotech Zypad WL15 Series Manuel utilisateur

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur