EuropAce EJF 7120W Manuel utilisateur
WARNING
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE
USING THE PRODUCT.
Avoid contacting moving parts. Keep hands,hairs,clothing and utensils away from the
safety guard to avoid injuries and damage of the product. Wait until all components have
completely stopped before removing the front safety guard.
Ensure that the fan is switched off from the supply mains before removing the guard.
Never use the product without the guards in place or with a damaged safety guards.
Switch the product off and disconnect it from the power supply before cleaning and when
not in use. Regarding cleaning information pls. Refer to page 9.
This product can not be used by children and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge unless they have been given
supervision or instruction concerning use of the product in a safe way and understand the
hazards involved.Children shall not play with the product.Cleaning and user manitenance
shall not be made by children without supervision.
Before connecting the product to the power supply, check that the power supply voltage
and current rating corresponds with the power supply details shown on the product’s
rating label. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persions in order to avoid a hazard.
This product shall not be installed in a bathroom.Install the product on a flat and stable
surface not subjected to constant vibrations.Place it in a vertical position.
Use the product on a flat and stable surface in dry place. Do not palce it on or near heat
source. Do not operate the product with wet hand. Do not immerse power cable, plug,
main product body into water or any other liquid. Keep it away from water, excessive heat,
excessive humidity, to avoid electric hazard, fire accident or other damages.
Ensure there is sufficient distance between this product and other items on the work
surface or work station, or sufficient distance between the appliance and the confines of
the area in which it is situated.
Do not palce any clothes or curtains on the products as they could be sucked into the fan
during operation and damage the product.Do not cover the product in any way during
operation, as this may cause overheating.
Do not lean on or tilt the product when it is working.
Do not insert or allow foreign objects to enter the safety guard openings as this may
cause damage to the product or user injury.
Never move the product while it is operating. Always switch the product off before
moving it.
Turn off the product and disconnect it from the power supply immediately if there is
abnormal noise, abnormal smell, overheating, abnormal rotating or other abnormal
situation.
Check the product for transport damages.
Remove all the packing materials.
Intended use
The product is intended to produce a cooling air flow.
This product is intended for indoor private use only.
No liability will be accepted for damages resulting from improper use or noncompliance
with these instructions.
This product contains no user serviceable parts and requires little maintenance. Leave
any servicing or repairs to qualified personnel only.
WARNING
The product works with a battery operated remote control.
The batteries must be installed respecting the polarity.
Check the (+) and (-) poles.
Do not mix old batteries with new ones or different types of batteries.
Never use batteries with electrolyte leaks or cracks.
Used batteries should naver be thrown into fire, they could explode.
Batteries should be kept out of the reach of children.
Do not swallow the battery. If the battery is swallowed, seek medical advice inmmediately.
Never short the battery poles. Used batteries should be removed from the appliance.
Remove the batteries from the appliance before diposing of the appliance when it is no
longer functional, or during long periods of non-use.
Naver try to open batteries.
Batteries should not be exposed to excessive heat.
Check that the battery compartment panel is properly closed.
Danger of explosion if battery is incorrectly replaced.
Replace the batteries only with batteries of the same type.
Non-rechargeable batteries should never be recharged.
The batteries must be replaced in accordance with the regulations in force regarding
disposal.
Please bring used batteries to a dedicated recycling center where they will be treated in
an environmentally friendly manner.
Any intervention on the appaliance by an unqualified person is prohibited.
Product Description
ON/OFF
MODE
OSC MUTE
REVERSE SPEED
TIMER ON TIMER OFF
LIGHT
1. Front guard
2. Spinner
3. Blades
4. Back Guard Nut
5.Back Guard
6. Stand Post
7.Remote Control
8. Helt Bolt
9. Screw Cover
10. Fan Screw
11. Hex Wrench
12. Base
13. BS Plug
14. On/Off Button
3
Product Description
ON/OFF
MODE
OSC MUTE
REVERSE SPEED
TIMER ON TIMER OFF
LIGHT
1. Front guard
2. Spinner
3. Blades
4. Back Guard Nut
5.Back Guard
6. Stand Post
7.Remote Control
8. Helt Bolt
9. Screw Cover
10. Fan Screw
11. Hex Wrench
12. Base
13. BS Plug
14. On/Off Button
3
Front Guard Installation
Insert the front guard into back guard's
edge and tur the front guard in clockwise
direcon to align with the mark on the
back guard.
Secure the Fan Frame Guard
Insert the Screw into hole on the fan
guard boon and secure it with
crosscrew driver.
ON/OFF
MODE
OSC MUTE
REVERSE SPEED
TIMER ON TIMER OFF
LIGHT
Operating Instruction
The product can be operated by the remote control or control panel on the
bottom. Remote control requires 1*Li-Mn button cell CR2032 (included).
Remote Control
Light Mode : Only availbable on the remote control,
Control Distance：3.5-5meter
Mute Mode : Only availbable on the remote control,
This function is used to deactivate the beep sound of the unit.
Other functions, please refer to below instructions.
Repalcing the batteries
WARNING：Before replacing the batteries, carefully read the safety
instructions in this manual.
1/2 Push on the plastic part as below and pull the tab to remove the
battery.
3/4 Remove and insert an indentical battery 1*Li-Mn button cell CR2032
respecting the polarity then reinsert the tab in its location.
5
6
Control Panel and button functions
Mode indicate light
Oscillation button
Wind Speed Decrease Button Wind Speed Increase Button
Timer Button
Reverse Wind Supply
Timer Indicate Light
Wind Speed LED Display
On/Off Button
On/Off Button on the control panel
First press on control button , the product operates with normal wind mode
and first level wind speed. Second press of the button , the product stops
working.
On/Off Button on top of head
There is on/off button on the top of back motor housing to control the wind
speed and on/off function.
1. First long press head button
in 1.5mins, the product operates
with normal wind and by first level
wind speed. Second long press in
1.5mins, the product can be turned off.
2. When the product is working, press head
button to adjust the wind speed.
On/Off
Button
Oscillation
In default setting, the product does not oscillate. Press button , left and right
oscillation begin.
7°
90°
Reminder: The head can be lifted up or
pushed down softly by hand. The up
angle is to 90°and down angle is to 7°
Ventilation Modes
NOTE: The product starts in normal mode, no indicate light display for normal mode.
Press button to change the mode. There are 4 different modes: normal mode, natural
mode, sleeping mode and ECO mode. The indicate light will display the mode set as below
form:
Mode
Light Display
NaturalNormal Sleeping ECO
Reminder:
By ECO mode, at below ambient temperature which the appliance detects,
there are 7 different settings:
Ambient
Temperature
Wind Speed
<23℃
2 Speed 4 Speed 6 Speed 8 Speed 9 Speed 10 Speed 12 Speed
23~25℃25~27℃27~29℃29~31℃31~33℃>33℃
Wind Speed
Press button to reduce the wind speed; press button to increase the
wind speed. Each time the button is pressed, the speed increase/decrease
by one level. The corresponding indicate light will be displayed after the wind
speed is selected. The remote control allows you to adjust the speed level by
pressing the corresponding buttons.
7
Timer
Display Indication
Timer
Display Indication
NoTimer Working 1-hour Timer 2-hour Timer 3-hour Timer
4-hour Timer 5-hour Timer 6-hour Timer 7-hour Timer
Timer
When the product is in operation, you can set the timer by pressing the Timer
Button of the control panel (or TIMER OFF button of the remote
control), so that the fan turns off automatically after the selected time has been
reached. 7 settings in total, from 1 hour to 7 hours. Each time the button is
pressed, the timer increases by one hour. The conrresponding time is diplayed
on the control panel as below:
When the product is not in use (in standby state), you can set the timer by
pressing the Timer button of the control panel (or TIMER ON button
of the remote control), so that the fan turns on automatically after selected
time is reached. 7 settings in total, from 1 hour to 7 hours. Each time the
button is pressed, the timer increases by one hour. The conrresponding
time is diplayed on the control panel as below:
Timer
Display Indication
Timer
Display Indication
NoTimer Working 1-hour Timer 2-hour Timer 3-hour Timer
4-hour Timer 5-hour Timer 6-hour Timer 7-hour Timer
Reverse wind supply
First press on button , the reverse wind supply can be started up. Second
press on button , the reverse wind supply can be canceled and changed
to forwarding wind supply.
8
Cleaning and Maintance
WARNING: Before cleaning your appliance, carefully read the safety
instructions in this manual.
Washable parts
Non-washable parts
- Always switch off the appliance, unplug and let it cool down before cleaning
or storing.
- Don't use abrasive scouring pads or powders or sharp utensils to clean this
appliance.
- Do NOT immerse in water. Rick of electric shock.
- Store the appliance in a cool and dry place if not using for long period.
9
Table des matières
Autres manuels EuropAce Ventilateur
EuropAce
EuropAce EJF 581S Mode d’emploi
EuropAce
EuropAce EQQ 7931S Manuel utilisateur
EuropAce
EuropAce EWF 6162V Manuel utilisateur
EuropAce
EuropAce EJF 198C Manuel utilisateur
EuropAce
EuropAce EPF 7183U Manuel utilisateur
EuropAce
EuropAce EJF 7981V Manuel utilisateur
EuropAce
EuropAce ETF 956P Manuel utilisateur
EuropAce
EuropAce RETRO ERF 7161T Manuel utilisateur
