EUROLAIKAS
Garažo ir kiemo vartai, vartųautomatika, kelio užtvarai, vartųpulteliai
, automatikos dalys
Laisvės pr. 121-65
, Vilnius. Tel. 8 (5) 246 33 33,
mob. +3706 824 2443
el. paštas: info@eurolaikas.lt, www.eurolaikas.lt
E-PARDUOTUVĖ: www.vartai.eu
1
1. Safety Instruction:
Please read this manual carefully before installation, in which involves with important information
about installation、using、maintenance and safety.
Any undefined operations under this manual is not allowed, incorrect using may damage the product
even causing the injuries or property losses.
To consider the possible danger during the installation or using process of sliding gate operator,
installation must strictly comply with the construction standard and Electrical operating procedure,
especially the following:
Before installation, please ma e sure that the power voltage being used matches with the supply
voltage of this product. Please chec if the lea age protection switch is installed and the grounding
system is correct.
Please chec if additional equipments or materials are required to meet the specific requirements.
The disposal of pac aging material must be complying with the local regulation.
Please do not change any parts except for those defined under this manual. Any undefined changes
may cause the malfunction. Any damages to the product arising therefrom shall be beyond the
liability of the company.
Please do not lea water or any liquid into the controller or any other open devices. Please
disconnect the power immediately if any mentioned cases happened.
Please eep this product away from heat and open fire. Or it may damage the components; cause
the failure or other hazards.
Please ma e sure there is no vehicles、passengers and objects passing through while the sliding
gate is moving.
Anti-clip equipment li e infrared protection switch must be installed to avoid injuries to person and
property losses. The company shall not be liable for any damage or accident arising therefrom.
The installation、using and maintenance of this product must be carried out by professionals.
Children are not allowed be touch the control devices or remote transmitters.
A warning sign must be placed somewhere on the sliding gate according to the national standard.
Please eep this instruction properly for future reference.
