1. General description
The MS650 brick cutter is a multi-functional machine used for wet cutting of floor tiles, flagstones,
stairs, natural stone, masonry, hollow blocks. The diamond plate is only suitable for cutting bricks,
block bricks, concrete and reinforced concrete. When cutting materials other than this, apply for a
special diamond plate at our customer service.
One of the great advantages of this easy to maintain machine is its transportability and simple
handling thanks to its weight and size. Another great feature is its precision cutting. As the machine
operates on 400 V, it requires industrial power supply. The MS700 brick cutter can be used with a
diamond saw blade having a maximum diameter of 650 mm.
2. Basic safety instructions
2.1 General safety regulations
- The manufacturer and the distributor undertake warranty exclusively in case of professional use.
- The manufacturer and the distributor shall not be liable for any accident or damage resulting from
inappropriate use.
- The machine has been designed in compliance with internationally recognized safety regulations.
However, inappropriate use may entail a danger of death or accident of the user or other persons
involved in the job, or it may cause damage to the machine or its accessories.
- The machine may be used exclusively under technically appropriate circumstances, in accordance
with the provisions of the instruction manual and the current international safety regulations,
solely by persons who are aware of the danger situation occurring while using the machine. Any
functional irregularity, especially that concerning machine safety, should be eliminated without
delay!
- Any alteration or modification of a part of the machine will invalidate the warranty and may result
in damage to or injury of the person using the machine, or harm to the environment. The
manufacturer shall not be liable for the consequences involved.
2.2 Safety regulations to be followed during operation
- The instruction manual should be kept at the place where the machine is being used. The manual
should be accessible to the machine operator.
- In addition to the instruction manual, all other officially applicable and mandatory regulations
pertaining to accident prevention and environmental protection should be observed! These
regulations include the handling of dangerous substances and the provision/use of personal
protective equipment.
- This instruction manual should be supplemented by guidelines relating to the control and
specification of individual organizational units (e.g., work organization, work processes, staff in
charge of the job at hand).
- Prior to use, the person in charge of operating the machine should read the manual through. It
applies specifically to persons using the machine only in specific cases, e.g., while installing or
maintaining it.
