Euroboor EBS.500 Manuel utilisateur

Operators manual

V 1.2 EN | February 2022

Electric Band Saw Machine

EBS.500

www.euroboor.com

Congratulations on the purchase of your EUROBOOR EBS.500 Band Saw Machine. At

EUROBOOR we strive to exceed our customers’ expectations by developing and providing

premium and innovative portable drilling and cutting solutions. We believe that a professional

like you must be able to rely on a professional supplier. Which has led us to become a major

player in the industrial world, with our own factory and several offices worldwide. All because

we have always listened to our customers and to the demands from the market.

Our vision is focused on developing innovative portable tools that add value for our customers

and facilitate them in their daily work. We never lose sight of sustainability, time savings and

cost savings.

Enjoy your new machine!

Before operating your band saw machine, please read all instructions first. These include the

Operators Manual and warning label on the unit itself. With proper use, care and maintenance

your model will provide you with years of effective cutting performance.

TO REDUCE THE RISK OF INJURY USER MUST READ AND UNDERSTAND ALL INSTRUCTIONS

To view all our offices and their contact information please visit: www.euroboor.com

The original manual has been produced in the English language. If any discrepancies should

occur in translations, reference must be made to the original version for clarification.

www.euroboor.com 

 
 
Table of contents 
Safety ........................................................................................................................... 4 
1 General safety instructions .............................................................................................. 4 
2 Specific safety information............................................................................................... 9 
Description ................................................................................................................. 11 
1 Intended use................................................................................................................... 11 
3 Box contents................................................................................................................... 13 
4 Serial number ................................................................................................................. 13 
5 Technical data................................................................................................................. 14 
6 Symbols .......................................................................................................................... 15 
7 Environmental ................................................................................................................ 16 
Preparation & adjustment........................................................................................... 17 
1 Assembly......................................................................................................................... 17 
2 Prior to use ..................................................................................................................... 18 
3 Replacing the saw band.................................................................................................. 20 
Using the machine ...................................................................................................... 21 
1 Turning the machine On / Off ........................................................................................ 21 
2 Adjusting the machine speed......................................................................................... 22 
3 Setting cutting angle....................................................................................................... 22 
4 Clamping the workpiece................................................................................................. 23 
5 Adjusting the blade guidance......................................................................................... 24 
6 Adjusting the distance set bracket................................................................................. 24 
7 Adjusting the depth of cut.............................................................................................. 25 
8 Transportation................................................................................................................ 25 
Maintenance............................................................................................................... 26 
Troubleshooting.......................................................................................................... 28 
Exploded view & Partslist............................................................................................ 29 
1 Exploded view................................................................................................................. 29 
2 Spare parts list................................................................................................................ 31 
Warranty and service .................................................................................................. 33 
Certifications............................................................................................................... 34 
1 CE declaration of conformity.......................................................................................... 34 
 
 

www.euroboor.com

1. Safety

1.1 General safety instructions

WARNING: When using the Electric Band Saw Machine, basic safety precautions

should always be followed to reduce the risk of fire, electric shock and personal

injury.

READ AND UNDERSTAND ALL SAFETY INFORMATION AND INSTRUCTIONS.

Failure to follow the warnings and instructions may result in electric shock, fire

and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

This Operator’s Manual including the “General Safety Instructions” should be kept for later

use and enclosed with the power tool, should it be passed on or sold.

The term “power tool” in the warnings refers to your mains-operated corded power tool.

Please also observe the relevant national industrial safety regulations. Non-observance of the

safety instructions in the said documentation can lead to an electric shock, burns and/or

severe injuries.

www.euroboor.com

WORK AREA SAFETY

1. Keep your work area clean and well lit. Cluttered benches and dark areas increase the

chance of accidents;

2. Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust

or fumes.

3. Keep bystanders, children, and visitors away while operating a power tool. Distractions

can cause you to lose control.

ELECTRICAL SAFETY

DANGER

1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use

any adapter plugs. Unmodified plugs and matching outlets will reduce risk of electric

shock.

2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock if your body is earthed or

grounded.

3. Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

4. Do not abuse the cord. Never use the cord to carry the power tool or pull the plug from

an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace

damaged cords immediately. Damaged cords increase the risk of electric shock.

5. When operating a power tool outdoors, use a – GROUNDED – extension cord suitable

for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

6. If operating a power tool in a damp location is unavoidable, use a residual current

device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

www.euroboor.com

PERSONAL SAFETY

WARNING: Wear ear and eye protection when using this power tool.

1. Stay alert, watch what you are doing and use common sense when using a power tool.

Do not use machine when tired or under the influence of drugs, alcohol, or medication.

A moment of inattention while operating power tools may result in serious personal

injury.

2. Use personal protective equipment. Always wear eye protection. Protective equipment

such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source or picking up / carrying tool. Carrying power tools with

your hand on the switch or energising power tools while pressing the switch, invites

accidents.

4. Remove any adjusting key or wrench before turning the power tool on. A wrench or a

key that is left attached to a rotating part of the power tool may result in personal

injury.

5. Do not overreach. Keep proper balance at all times. This enables better control of the

power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and

gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in

moving parts.

7. If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used.

8. Never place hands, fingers, gloves or clothing near cutting area or rotating machine

parts.

POWER TOOL USE AND CARE

1. Secure your workpiece properly. The workpiece should be clamped to avoid possible

movement and pinching as the cut nears completion.

2. Do not force the power tool. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it was designed.

3. Do not use the power tool if the switch does not turn it on or off. Any tool that cannot

be controlled with the switch is dangerous and must be repaired.

www.euroboor.com

4. Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

5. Store power tools out of the reach of children and do not allow person unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

6. Maintain power tools. Check for misalignment or binding of moving parts, breakage of

parts, and any other condition that may affect the power tool’s operation. If damaged,

have the tool serviced before use. Many accidents are caused by poorly maintained

tools.

7. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges

are less likely to bind and are easier to control.

8. Use the power tool, accessories and tool bits, etc. in accordance with these

instructions, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a

hazardous situation.

9. Use only accessories that are recommended by EUROBOOR for your power tool.

Accessories that may be suitable for one machine, may become hazardous when used

on another power tool.

SERVICE

1. Power tool service must be performed only by qualified repair personnel. Service or

maintenance performed by unqualified personnel could result in risk of injury.

2. When servicing a power tool, use only identical replacement parts. Follow instructions

in the maintenance section of this manual. Use of unauthorised parts or failure to

follow maintenance instructions may create a risk of electric shock or injury.

www.euroboor.com

RESIDUAL RISKS

In spite of the application of the relevant safety regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

•Impairment of hearing

•Risk of personal injury from flying particles

•Risk of burns due to accessories becoming hot during operation

•Risk of personal injury due to prolonged use.

Always try to reduce these risks as much as possible.

www.euroboor.com

1.2 Specific safety information

WARNING: This tool is intended to function as Electric Band Saw Machine. Read all

safety warnings, instructions, illustrations and specifications provided with this tool.

Failure to follow all instructions listed below may result in electrical shock, fire and

serious injury.

Safety instructions

1. Fully assemble your band saw machine before operation.

2. Secure your workpiece properly. Work should be clamped to avoid possible movement

and pinching as the cut nears completion.

3. Please do the following safety checks before you start using the machine.

a. Always check if all bolts, screws and clamps are fully tightened. Tighten loose

bolts before use. If bolts, screws or clamps are missing, please refer to your

EUROBOOR dealer and have these replaced.

b. Always check if the saw band can run freely before you start working with the

machine. Have the Electric Band Saw Machine serviced by qualified repair

personnel at your EUROBOOR dealer, if the saw band cannot run freely or

vibrates heavily.

c. Check the saw band for cracks or other damage before operation. Do not use

Saw band when it is damaged or deformed.

d. Check if your workpiece is properly secured, using the machine’s clamp.

e. Check if the saw band of the machine is not contacting the workpiece before

the machine is turned on.

4. Turn the machine on, but allow the motor to come up to full speed before you start

cutting.

5. Lower the saw band onto the material firmly.

6. Wait for the saw band to come to a full stop before making adjustments to the machine

or removing / securing the workpiece.

7. Always shut off and unplug machine before servicing or adjusting the machine.

8. Save the instructions manual and warning labels at all times.

www.euroboor.com

Safety warnings

1. Do not operate your band saw machine until it is completely assembled and installed

according to the instruction.

2. Do not operate your band saw machine when bolts, screws and clamps are missing or

not fully tightened.

3. Do not operate the machine if you are not familiar with the operation of a band saw

machine. Please obtain advice from a qualified person.

4. Do not use the machine in area’s with flammable liquids or gasses.

5. Do not use the machine in damp area’s or when it is exposed to rain.

6. Do not use the machine if the saw band cannot run freely or vibrates heavily.

7. Do not reach behind or over the cutting tool when it is connected to the power source.

8. Do not reach your hands in or near the path of the saw band.

9. Do not cut any objects that are not clamped, using the clamp of the band saw machine.

10. Do not make any adjustments to the machine, removing or securing the workpiece,

when the saw band has not come to a full stop.

11. Do not use a saw band with different measurements than the machine’s requirements.

12. Do not remove any guards from the machine, as they contribute to the safety level of

the machine.

13. Do not allow the saw band to chatter and jump as this may cause increased wear on

the saw band, resulting in poor cutting and possible broken saw band teeth.

Autres manuels pour EBS.500

Table des matières

Autres manuels Euroboor Scie

Euroboor

Euroboor EHG.230 Manuel utilisateur

Euroboor

Euroboor EDC.135 Manuel utilisateur

Euroboor

Euroboor EBS.500 Manuel utilisateur

Euroboor

Euroboor EDC.355 Manuel utilisateur

Euroboor

Euroboor EHC.230/3 Manuel utilisateur

Manuels Scie populaires d'autres marques

RIDGID

RIDGID BS1400 Manuel utilisateur

ATIKA

ATIKA BWS 400-2 Manuel utilisateur

RGC

RGC FS20 Manuel utilisateur

Makita

Makita M2300 Manuel utilisateur

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuel utilisateur

IMET Spa

IMET Spa SIRIO 370 AF-E Manuel utilisateur

Optimum

Optimum OPTisaw CS 275 Manuel utilisateur

Makita

Makita BPB180 Manuel utilisateur

Stihl

Stihl MS 462 C-M Manuel utilisateur

AEG

AEG TS 250 K Manuel utilisateur

Meec tools

Meec tools 004665 Manuel utilisateur

Makita

Makita LS1018L Manuel utilisateur

Ryobi

Ryobi RCS1400 Manuel utilisateur

DeWalt

DeWalt DCS391 Manuel utilisateur

Sealey

Sealey SA72 Manuel utilisateur

skilsaw

skilsaw SPT88 Instructions de montage

Urrea

Urrea SI810 Dimensions et guide d'installation

EINHELL

EINHELL BKG 210/1 Manuel utilisateur