10 3
INSTALLATIONS INSTRUCTIONS
IMPORTANT NOTICE TO THE INSTALLER
GAS CONNECTION
The appliance shall be ins alled by an au horized person in
accordance wi h he manufac urers ins alla ion ins ruc ions,
relevan local fi ing regula ions, municipal building regula ions,
he AS5601 ( AG601 ) - Gas Is alla ion . For gas burning appliances
and equipmen and o her relevan s a u ory code band regula ions.
If you have some doub s, please con ac he au hori ies for
confirma ion concerning he charac eris ics of he gas and elec rici y
ou pu .
This appliance can be connec ed wi h rigid pipe as specified in
AS5601 able 3.1 or wi h a Flexible Hose which complies wi h
AS/ANZ 1869 (AGA Approved), 10mm ID, class B or D, no more
ha 1.2m long and in accordance wi h AS5601. Ensure that the
Hose does not contact the hot surfaces of the hotp ate, oven,
dishwasher or other app iance that may be insta ed
underneath or next to the hotp ate. The Hose shou d not be
subjected to abrasion, kinking or permanent deformation and
shou d be ab e to be inspected a ong its entire ength. Unions
compatib e with the hose fittings must be used and
connections tested for gas eaks. The supp y connection point
sha be accessib e with the app iance insta ed.
The appliance is generally prese for na ural gas (so no o her
adjus men is necessary) and equipped wi h a regula or wi h
pressure es poin . Ensure ha all foreign ma er has been cleared
from he gas supply line and also purge all air from he gas sys em.
Connec o regula or, igh en and check he ins alla ion o ensure
no gas leaks occur. Check gas pressure, a duplica e label is
supplied and adhered o he fron of his ins ruc ion manual, no e
he correc se ing from he da a pla e sealed on he lower side
This appliance from he fac ory sui able for NATURAL gas bu , if
necessary, can be adjus ed for U-LPG or TLP gas by a compe en
licensed person.
5 URNER UNIT
DIMENSIONS
Overall Heigh above work surface ...................................45 mm
Wid h .........................................................................680 mm
Dep h.........................................................................510 mm
Minimum space above ho pla e ......................................600 mm
CONNECTIONS
Gas..............................................................RC 1/2 (1/2" B.S.P.)
Elec ric ......................1 mm2 3 core cable (3 amp fuse required)
Should conform o local gas au hori y requiremen s.
Also refer o rangehood manufac urers recommenda ions.
GAS HOT PLATE
USERS INSTRUCTIONS
To ligh he burner, urn he appropria e knob an iclockwise o he
low posi ion (marked wi h a small flame symbol ) and depress
he igni ion bu on and release. If burner does no igni e repea
he procedure. To adjus he burner o he full-on posi ion, urn he
con rol knob clockwise o he appropria e se ing (marked wi h a
large flame symbol ).
Where his appliance is ins alled in marine craf or in caravans,
i shall NOT be used as a space hea er".
To urn he burner OFF, urn he con rol knob clockwise o he
OFF se ing (marked wi h a do ).
B
A
A
B
C
Fig. 1
A-Burner cap
B-Lighting plug
C-Triple flame cap
APPLIANCES WITH SAFETY VALVE
Follow he same procedure described above o igni e he burners.
In his case, however, once you have urned he knob o he open
se ing, hold i pressed in for 10 seconds. If for any areason he
burner flame goes ou , he safe y valve au oma ically shu s off he
gas supply o he burner in ques ion.
I is recommended ha pans sui able o he size of he burner
should de used as follows:
urner minimum maxmum
diameter diameter
Large (rapid) 180mm 230mm
Medium (semi-rapid) 120mm 200mm
Small (Auxiliary) 80mm 160mm
Triple Flame 220mm 260mm
Always use pans wi h all fla base diame er, which are well balanced
and s able in use, a pan which overhangs he ho pla e should no
be used. Avoid using old, misshapen pans, or pans which are
uns able when placed on a fla surface. Do no use spli pans
of he case. 5 burner models: "burner pressure is o be se a 1
kpa wi h middle fron and righ fron burners opera ing a full ra e.
Apply a manome er o he es nipple and rese he regula or if
necessary.Do no forge o replace he es nipple screw and o
leave he ins ruc ions book wi h he user.
For he adjus men s o TLP or U-LPG gas, please opera e as
specified in he paragraph GAS CONVERSION AND
ADJUSTMENT (Page. 8).
Impor an : several par s are pro ec ed wi h a special an i-scra ch
film. Please remove i before use.
Dua trip e f ame version
no gas flow
maximum gas flow from central burner
minimum gas flow from central burner
maximum gas flow from outer and central burners
simultaneousl
minimum gas flow from outer and central burners
simultaneousl
