EUFY SoloCam S40 Manuel utilisateur

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are
trademarks of Anker Innovations Limited, registered in the United States and other
countries. All other trademarks are the property of their respective owners.
51005002858 V01
QUICK
START GUIDE
SoloCam S40

EN 01
TABLE OF
CONTENTS
PRODUCT OVERVIEW 02
CHARGING SOLOCAM 03
SETTING UP SOLOCAM 04
05 MOUNTING SOLOCAM
08 NOTICE
English 01
Deutsch 11
Español 21
Français 31
Italiano 41
Nederlands 51
Portuguese 61
71

02 EN EN 03
PRODUCT
OVERVIEW
1. Solar Panel 6. LED Indicator
2. Camera Lens 7. SYNC Button
3. Motion Sensor 8. Type-C Charging Port
4. Photosensitive Sensor 9. Mounting Hole
5. Microphone 10. Speaker
1
4
3
7
2
10
6
9
8
5
CHARGING
SOLOCAM
Battery-powered
Charging Solid blue
Fully charged Off

04 EN EN 05
SETTING UP
SOLOCAM
Download the App and Set up the System
1. Download and install the eufy Security app, and sign up for an account.
2. Follow on-screen instructions to add your SoloCam .
MOUNTING
SOLOCAM
Select a Location
SoloCam S40 can be mounted on a wall. Select a location where you can
get the desired view. We recommend hanging it 7-10 ft (2-3 m) above
the ground.
Motion
Detection
Zone
Camera field
of view
Up to 26 ft (8 m)
7-10 ft
(2 - 3 m)
Motion
Detection
Zone
Camera field
of view
To maximize the solar panel efficiency, select a location where
SoloCam S40 can receive more sunlight.

06 EN EN 07
Mount SoloCam S40
SoloCam S40 can be mounted both outdoors and indoors.
1. Turn the knob of the mounting bracket counterclockwise to loosen
and disassemble it.
2.Place the mounting bracket against the wall. Drill holes with a 15/64
inch (6 mm) drill bit, then insert the anchors into the holes; anchors
are necessary for walls that are made out of hard materials such as
concrete, brick, or stucco.
3. Firmly screw the knob of the mounting bracket into the mounting hole
of SoloCam.
4. Hold and screw SoloCam to the mounting bracket. Rotate SoloCam
to adjust the view and check it using the live stream which you can
access in the eufy Security app.
SoloCam S40 can be also installed on the ceiling. Follow the steps 1-4
mentioned above to install it.
Tips:
For troubleshooting, check Help on the eufy Security app. Refer to the
app page for LED indicator status.

08 EN EN 09
NOTICE
This product complies with the radio interference requirements of the European
Community.
Hereby, Anker Innovations Limited declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU. For the
declaration of conformity, visit the Web site: https://uk.eufylife.com/.
This product can be used across EU member states.
Due to the used enclosure material, the product shall only be connected to a USB
Interface of version 2.0 or higher.
The adapter shall be installed near the equipment and shall be easily accessible.Do not
use the Device in the environment at too high or too low temperature, never expose
the Device under strong sunshine or too wet environment.
The suitable temperature for T8124 and accessories is -20°C-50°C.
When charging, please place the device in an environment that has a normal room
temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature that
ranges from 5°C~25°C.
Please make sure to use only the charger provided by the manufacturer. When the
manufacturer does not provide the charger, please use a charger that complies with
EU regulations, otherwise it may cause danger and violate the authorization of the
product and warranty terms.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body. To
maintain compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power:19dBm
The following importer is the responsible party (contact for EU matters only)
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste,
and should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
This product complies with the radio interference requirements of the United
Kingdom.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with
Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is
available at the following internet address: https://uk.eufylife.com.
Anker Technology (UK) Ltd I Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom

DE 1110 EN
Customer Service
Warranty
12-month limited warranty
Call Us
United States
+1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom
+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
Email Us
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial
INHALTS-
VERZEICHNIS
PRODUKTÜBERSICHT 12
SOLOCAM LADEN 13
SOLOCAM EINRICHTEN
14
15 SOLOCAM MONTIEREN
18 HINWEIS

12 DE DE 13
PRODUKTÜBERSICHT
1.Solarmodul 6.LED-Anzeige
2.Kameraobjektiv 7.SYNC-Taste
3.Bewegungssensor 8.Ladeanschluss Typ C
4.Lichtempfindlicher Sensor 9.Befestigungslöcher
5.Mikrofon 10.Lautsprecher
1
4
3
7
2
10
6
9
8
5
SOLOCAM LADEN
Batteriebetrieben
Ladevorgang Blau leuchtend
Vollständig aufgeladen Aus

14 DE DE 15
SOLOCAM
EINRICHTEN
App herunterladen und System einrichten
1.Laden Sie die eufy Security-App herunter, installieren Sie sie und richten
Sie ein Konto ein.
2.Befolgen Sie die Anweisungen auf dem Bildschirm, um Ihre SoloCam
hinzuzufügen.
SOLOCAM
MONTIEREN
Montageort auswählen
Die SoloCam S40 kann an der Wand oder Decke montiert werden.
Wählen Sie einen Ort, an dem Sie die gewünschte Ansicht erhalten.Wir
empfehlen, das Gerät 2 bis 3 m über dem Boden aufzuhängen.
Motion
Detection
Zone
Camera field
of view
Up to 26 ft (8 m)
7-10 ft
(2 - 3 m)
Motion
Detection
Zone
Camera field
of view
Um die Effizienz des Solarmoduls zu maximieren, wird für die
Installation der SoloCam S40 ein sonniger Standort empfohlen.

16 DE DE 17
SoloCam S40 montieren
Die SoloCam S40 kann im Außen- und Innenbereich montiert werden.
1.Drehen Sie den Knopf der Montagehalterung gegen den Uhrzeigersinn,
um sie zu lösen und zu zerlegen.
2.Positionieren Sie die Montagehalterung an der Wand.Bohren Sie
Löcher mit einem 6-mm-Bohreinsatz, und stecken Sie anschließend
die Dübel in die Bohrungen. Dübel sind bei Wänden aus harten
Materialien wie Beton, Backstein oder Stuck erforderlich.
3.Schrauben Sie den Knopf der Montagehalterung fest in das
Montageloch der SoloCam.
4.Halten Sie die SoloCam fest, und schrauben Sie sie an die Halterung.
Drehen Sie die SoloCam, um die Ansicht anzupassen. Zum Prüfen der
Ansicht verwenden Sie den über die eufy Security-App zugänglichen
Live-Stream.
Die SoloCam S40 kann auch an der Decke installiert werden.Befolgen Sie
zur Montage die oben genannten Schritte 1 bis 4.
Tipps:
Informationen zur Fehlerbehebung finden Sie in der Hilfe der eufy
Security-App.Informationen zum Status der LED-Anzeige finden Sie
auf der App-Seite.
Table des matières
Langues :
Autres manuels EUFY Caméra de sécurité

EUFY
EUFY eufyCam E330 Manuel utilisateur

EUFY
EUFY PET D605 Manuel utilisateur

EUFY
EUFY SoloCam L20 Manuel utilisateur

EUFY
EUFY eufyCam S330 Manuel utilisateur

EUFY
EUFY eufyCam Solo Manuel utilisateur

EUFY
EUFY T8420 Manuel utilisateur

EUFY
EUFY eufyCam 2 Manuel utilisateur

EUFY
EUFY eufyCam 2 Pro Manuel utilisateur
















