EN - 8
Connect the alarm to your app (EZ mode)
Step 1 : Enter Wi-Fi Connection Mode on your alarm.
Press the Admin code 123456 +
Attention
Ensure the system is disarmed, the Blue LED is OFF. After entering Wi-Fi connec-
tion mode, the Wi-Fi white LED starts to blink fast. now your alarm is ready to
connect to your home network.
Step 2 : In your app, choose the device you will add : choose “Add device”or“+”
and“Smart Alarm”. The app will ask if the LED is blinking fast. Conrm if this is
the case.
Note
Make sure to connect your alarm system to a 2.4 GHz network. eTIGER alarmsys-
tems do not work with 5.0 Ghz network. If expierincing any problems, please rst
contact your network provider.
4
