LQS03
V. 01 – 15/11/2023 5 ©Velleman Group nv
3. General Guidelines
Refer to the Velleman Group NV® Service and Quality Warranty
on the last pages of this manual.
•Familiarise yourself with the functions of the device before
actually using it.
•All modifications of the device are forbidden.
•Only use the device for its intended purpose. Using the device
in an unauthorised way will void the warranty.
4. Features and specifications
•This compact switch sensor nicely conceals the control of LED
lighting. Simply mount this sensor for flush mounting in the
cabinet by drilling an 8mm hole. You can easily conceal the
electronic control module in a false wall. This will give you a
perfectly finished installation.
•With just one wave of your hand, you activate the LED strip. A
second wave and the lights go out again. Transform your space
with this convenient, smart solution. Choose our recessed switch
sensor and bring innovation to your interior. See image on page 2
•suitable for: 12 and 24V LED strips
5. Installation
Determine the Mounting Location:
Determine the location where the switch sensor should be placed.
Choose a location for the wave sensor where there is minimal chance
of unintended movement. For example, avoid places where many
people walk by. A good spot is often on the side of a cabinet or wall.
Important!:
Connect the sensor to the LED driver and LED strip and test the
operation in a test setup. If the result is good, you can start the
effective assembly.
Drill the Mounting Hole:
Use the drill to drill a hole at the marked location. Make sure the hole
is large enough (8mm) to safely mount the sensor.
