EtherWAN EN400 Manuel utilisateur
PCI Express Ethernet Adapter
User’s Manual 1
Preface
This manual describes how to install and use the PCI Express
Ethernet Adapter. This PCI Express Ethernet Adapter allows
options of the different fiber connections (such as connector types
and segment distance).
To get the most out of this manual, you should have an
understanding of Ethernet networking concepts.
In this manual, you will find:
•Introduction on PCI Express Ethernet Adapter
•Product features
•LEDs functions
•Hardware installation
•Software installation
•Specifications
PCI Express Ethernet Adapter
2 User’s Manual
Table of Contents
PREFACE 1
TABLE OF CONTENTS 2
PRODUCT OVERVIEW 3
PACKAGE CONTENTS 3
PRODUCT FEATURES 4
Driver Support 5
LEDs 5
HARDWARE INSTALLATION 6
INSTALLING ETHERNET ADAPTER INTO PCI EXPRESS SLOT 6
CONNECTING TO YOUR NETWORK 7
PCI Express Fiber Ethernet Adapter 7
Cabling Requirements 8
DRIVER INSTALLATION 9
DIAGNOSTICS UTILITY 12
DIAGNOSTICS UTILITY INSTALLATION 12
DIAGNOSTICS UTILITY CONFIGURATION 15
General 15
VLAN 15
Driver 16
Advanced Setting 16
Diagnostics 17
Send and Receive 17
Statistics 18
Cable 18
Wake On LAN 19
EEE Status 19
About 20
SPECIFICATIONS 21
PCI Express Ethernet Adapter
User’s Manual 3
Product Overview
Package Contents
When you unpack the product package, you shall find the items
listed below. Please inspect the contents, and report any apparent
damage or missing items immediately to our authorized reseller.
3PCI Express Ethernet Adapter
3CD includes User’s Manual &
Software Driver
PCI Express Ethernet Adapter
4 User’s Manual
Product Features
zProvides (depends on models):
One 100Base-FX port or
One SFP slot
zfiber connections:
SC, ST or LC connectors for multi-mode, and SC
connector for single-mode
Compliant with IEEE 802.3u 100Base-FX
zSupports PCI Express 1.1
zSupports Plug-and-Play
zSupports Wake-on-LAN and remote wake-up
zSupports IEEE802.1Q VLAN Tagging
zSupports IEEE802.1p Layer 2 Priority Encoding
zSupports 1-Lan 2.5Gbps PCI Express Bus
zIEEE 802.3x Full Duplex flow control
zTwo LEDs: LNK/ACT (link/activity), SPD (speed)
z0℃to 50 (32 to 1℃℉ 22 ) operating temperature range℉
PCI Express Ethernet Adapter
User’s Manual 5
Driver Support
The Adapter supports a wide range of drivers for commonly used
network operating systems:
yMicrosoft Windows 98, Windows ME, Windows 2000,
Windows XP, Windows 2003, Windows Vista, Windows 7 and
Windows 2008
ySCO Unix 5.0.6 and 5.0.7
ySCO OpenServer 6 and Unixware 7.1.x
yFreeBSD 7.x and 8.0
yLinux kernel 2.4.x and 2.6.x (Support x86, x64)
yNovell client for DOS (ODI driver)
yNovell Netware Server driver (Support OS 5.x, 6.x)
yMacOS 10.4, 10.5 and 10.6 on Intel-based Mac computer
LEDs
cLNK/ACT Link/Activity
dSPD 100Mbps
LEDs Status Indication
Steady A valid network connection established.
LNK stands for LINK.
Flashing Transmitting or receiving data.
ACT stands for ACTIVITY.
LNK/ACT
Off Neither connection nor activity.
Steady 100Mbps.
SPD
Off 10Mbps.
PCI Express Ethernet Adapter
6 User’s Manual
Hardware Installation
Installing Ethernet Adapter into PCI Express
slot
Step 1: Turn off the power to the PC.
Step 2: Remove any metal decorations from your hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty bus mastering PCI Express slot and remove the
corresponding backplate. Save the screw for use in Step 6.
Step 5: Carefully insert the PCI Express Ethernet Adapter into the chosen slot
and press firmly with proper push to ensure it is fully seated in the slot.
Step 6: Secure the PCI Express Ethernet Adapter with the screw you saved in
step 4.
Step 7: Replace the PC cover.
Step 8: Proceed to “Connecting to Your Network” section.
PCI Express Ethernet Adapter
User’s Manual 7
Connecting to Your Network
PCI Express Fiber Ethernet Adapter
This section describes how to connect the PCI Express Fiber
Ethernet Adapter to a 100 Mbps fiber-based Ethernet network,
which contributes to its optimal performance.
<Note>
You must connect the PCI Express Fiber Ethernet Adapter to the network before
installing the network driver.
Step 1: Remove the protective covers from the PCI Express Fiber Ethernet
Adapter’s connector.
Step 2: Prepare a network cable with corresponding connectors for the two end
devices, one end to the PCI Express Fiber Ethernet Adapter and the other
to a 100Mbps fiber port on the network switch.
Step 3: Connect the network cable to the connector on the PCI Express Fiber
Ethernet Adapter. This network cable consists of two individual cables:
one for ‘transmission (TX)’, and the other for ‘reception (RX)’.
Step 4: Connect the other end of the network cable to a 100BASE-SX/LX switch.
<Note>
i. Insert the cable that is connected to the transmit (TX) connector on the PCI Express
Fiber Ethernet Adapter into the receive (RX) connector on the network switch.
ii. Insert the cable that is connected to the receive (RX) connector on the PCI Express
Fiber Ethernet Adapter into the transmit (TX) connector on the network switch.
Step 5: When the cable is properly connected to two end devices, turn on the
power to the PC.
Step 6: Check the LNK (Link) LED. The LED will come on when the PCI
Express Fiber Ethernet Adapter is receiving a good link signal from the
connected device, a switch.
Step 7: Proceed to next section for installing the network driver.
PCI Express Ethernet Adapter
8 User’s Manual
Cabling Requirements
For connector type, cabling requirements, and maximum segment
distance when connecting the PCI Express Ethernet Adapter to
your network, please refer to the following table.
Connector Type
on Fiber Adapter Wavelength of 1300nm Fiber
Optic required Maximum Distance
(* full-duplex)
ST Multi-mode, 50 or 62.5/125 µm 2 km
SC Multi-mode, 50 or 62.5/125 µm 2 km
VF-45 Multi-mode, 50 or 62.5/125 µm 2 km
MT-RJ Multi-mode, 50 or 62.5/125 µm 2 km
LC Multi-mode, 50 or 62.5/125 µm 2 km
SC Single-mode, 9 or 10/125 µm 20 km
SC Single-mode, 9 or 10/125 µm 40 km
SC Single-mode, 9 or 10/125 µm 60 km
<Note>
The maximum node-to-node network distance is in full-duplex operation.
PCI Express Ethernet Adapter
Driver Installation
1. Turn on the computer after plugging PCI Express Ethernet
Adapter to PCI Express slot. The “Found New Hardware
Wizard” window pops up.
2. Select “Install from a list or specific location (Advanced)” and
click “Next” to continue.
User’s Manual 9
PCI Express Ethernet Adapter
3. Select “Search for the best driver in these locations.” and then
select “Include this location in the search:”. Click “Browse” to
specify the driver location and click “Next” to continue.
4. Installing.
10 User’s Manual
Table des matières
Autres manuels EtherWAN Adaptateur
