ETC Source Four Mini LED Manuel utilisateur

Part Number:

7063M1220

Rev: C

Released: March 2016

User Manual

Revision C

Table of Contents

ETC

and Source Four mini™ are trademarks of Electronic Theatre Controls, Inc.

in the United States and other countries.

All other trademarks, both marked and not marked, are the property of their

respective owners.

ETC permits the reproduction of materials in this manual only for non-

commercial purposes. All other rights are reserved by ETC.

ETC intends this document, whether printed or electronic, to be provided in its

entirety.

Introduction . . . . . . . . . . . . . . . . . . . . . . .1

Basic Assembly . . . . . . . . . . . . . . . . . . . . .2

Install Lens Tube . . . . . . . . . . . . . . . . . . . .3

Adjustments . . . . . . . . . . . . . . . . . . . . . . .3

Adjusting the yoke position . . . . . . . . . . . .3

Setting the angle with the yoke . . . . . . .3

Locking the rotation in the canopy

and track-mount variations . . . . . . . . . . .4

Focusing the beam . . . . . . . . . . . . . . . . . .4

Shaping the Beam . . . . . . . . . . . . . . . . . . . .4

Pattern Projection. . . . . . . . . . . . . . . . . . .5

Color Frame Holder . . . . . . . . . . . . . . . . . . .5

Adjusting the C-clamp on the Portable . . .6

Cleaning the Glass Lens . . . . . . . . . . . . . .7

ETC User Manual 1

Introduction

The Source Four Mini LED has three available mounting options. The portable

version includes a miniature C-clamp and yoke mounted driver. The canopy-

and track-mount designs both include an integral driver. There are four lens

tube sizes available for each mounting style; 19°, 26°, 36°, and 50°.

This manual covers the common features for all three versions of the Source

Four Mini LED. For information on installing the canopy and track-mount

variations, see the Source Four Mini LED Canopy and Track-Mount Kits

Installation Guide. For information on adjusting the miniature C-clamp on the

portable variation, see Adjusting the C-clamp on the Portable on page 7.

WARNING:

Please note the following safety warnings before

use:

Do not mount the fixture on or near combustible

surfaces.

Do not operate the fixture without a lens installed.

Always hang the fixture with the color frame

retaining clip in the locked position.

WARNING:

To reduce the risk of fire and electric shock, use the

track mount version only with the EUTRAC®track

system.

AVERTIR:

Pour éviter le risque d'incendie ou de choc électrique

utiliser seulement avec une alimentation par rail

EUTRAC.

Portable TrackCanopy

2 Source Four Mini LED User Manual

Basic Assembly

Color frame

retainer clip

Yoke

Pattern Holder

Slot

Shutter Barrel

Color frame

Shutters x4

Lens tube

Beam focus

knob

Safety cable

attachment point

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, EXPOSURE

TO EXCESSIVE UV RADIATION, OR INJURY TO PERSONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING - To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO

EXCESSIVE UV RADIATION, OR INJURY TO PERSONS:

1) Do not touch hot lens, guard, or enclosure.

2) Do not remain in light if skin feels warm.

3) Do not look directly at lighted lamp.

4) Keep lamp away from materials that may burn.

5) External temperature after 5 minutes of full-brightness operation 50°C

(122°F)

6) External temperature when steady state is achieved 67°C (152.6°F).

SAVE THESE INSTRUCTIONS

ETC User Manual 3

Install Lens Tube

A lens tube must be installed prior to use of the Source Four Mini LED. There

are four lens tube sizes available; 19°, 26°, 36°, and 50°.

Step 1: Unscrew the beam focus knob from the loose lens tube.

Step 2: Slide the lens tube into the shutter barrel.

Step 3: Install the beam focus knob.

Adjustments

Adjusting the yoke position

The Source Four Mini LED provides multi-positioning capabilities within its

yoke for overall fixture angle.

Setting the angle with the yoke

Step 1: Loosen the yoke locking knob. Do not remove the knob.

Step 2: Tilt the fixture to the desired position.

Step 3: Tighten the yoke locking knob to secure position.

Beam focus knob

Yoke locking

knob

4 Source Four Mini LED User Manual

Locking the rotation in the canopy and track-mount

variations

Step 1: Rotate the fixture into the desired position. Fixture will be prevented

from rotating completely around to protect the wiring.

Step 2: Insert a 1.5mm Allen wrench into the small hole on the yoke lock.

Step 3: Turn wrench to tighten down the yoke lock.

AD1 Track Adapter

ETC offers the option of installing a track mounted fixture with an adapter that

is compatible with Halo Track Systems. Halo Track Systems are not available

from ETC.

Both single and double circuit track can be accommodated with this adapter.

• For single circuit track, push the tab on the adapter to the lower

position.

• For double circuit track, push the tab to the upper position.

To install a fixture with the AD1 adapter:

Step 1: Pull back on the retaining sleeve.

Step 2: Insert the adapter into the track with the gold tabs parallel to the

track.

Step 3: Release the sleeve and rotate until you feel the adapter snap

securely into place.

Note:

If installing with LSI (http://www.lightingservicesinc.com/) or

Global (http://www.nordicaluminium.fi/en/index.html) track,

please reference the manufacturer's website for installation

instructions.

Yoke lock

ETC User Manual 5

Focusing the beam

Step 1: Loosen the

beam focus

knob located

under the

barrel. Do not

remove the

knob.

Step 2: Slide the lens

tube forward or

backward to

achieve the

desired beam

edge.

Step 3: Once the fixture is focused, tighten the beam focus knob.

Shaping the Beam

The beam can be shaped using the four shutters or with a pattern.

The Source Four Mini LED has four shutters: left, right, top, and bottom. Each

shutter can be pulled out or pushed in to create the desired beam shape.

Pattern Projection

The Source Four Mini LED has a pattern holder slot on the top side of the

shutter barrel, in front of the shutter. It accommodates a E-size (37.5mm with

a 25.4mm image area) pattern holder.

Use an optional donut in the color frame holder to enhance pattern

projection.

When the slot is not in use, a small sheet metal cover secured with a Phillips

screw prevents light leakage.

Beam focus knob

6 Source Four Mini LED User Manual

Color Frame Holder

The Source Four Mini LED comes equipped with a 2 ¾” or 70mm color frame,

which is a metal frame used to hold color media (often referred to as gel) in

front of the lens. The color frame holder is equipped with a retaining clip that

prevents the color frame from falling out.

Step 1: Release the retaining clip by gently

pushing it up.

Step 2: Insert the color frame.

Step 3: Lock the retaining clip by gently

pushing it down.

Additional accessories are available for the Mini

LED that also fit into the color frame holder.

Those accessories are top hat, short top hat, half hat, short half hat, and

donut. When an accessory is used, the color frame should be installed in the

rear slot of the holder.

WARNING:

Make sure the color frame is locked in position with

the retaining clip.

Note:

The color frame should be inserted open side down.

1” Diameter

Step 1: Use a Phillips screwdriver to loosen the

screw on the slot cover. Do not remove the

screw.

Step 2: Slide the cover completely forward to

expose the slot.

Step 3: Insert the pattern holder.

Step 4: Slide the slot cover back toward the

shutters until it meets the pattern handle.

Leave enough space to move the handle.

Step 5: Secure the slot cover by tightening the

screw.

Retaining

clip

Color

Frame

Holder

Autres manuels pour Source Four Mini LED

Table des matières

Autres manuels ETC Projecteur

ETC

ETC Source Four jr Manuel utilisateur

ETC

ETC Source 4WRD Manuel utilisateur

ETC

ETC Source Four MultiPAR Manuel utilisateur

ETC

ETC 2510A1001 Instructions de montage

ETC

ETC source four fresnel Manuel utilisateur

ETC

ETC Source Four LED Series Manuel utilisateur

ETC

ETC CE Source FourPAR Manuel utilisateur

ETC

ETC Desire D60 Manuel utilisateur

ETC

ETC Source Four LED Series Manuel utilisateur

ETC

ETC Source Four Manuel utilisateur

ETC

ETC Source Four PARNel Manuel utilisateur

ETC

ETC Source Four Zoom Manuel utilisateur

ETC

ETC Source Four jr Manuel utilisateur

ETC

ETC fos/4 Series Manuel utilisateur

Manuels Projecteur populaires d'autres marques

VIZULO

VIZULO Micro Martin Guide de l'utilisateur

EuroLite

EuroLite LED IP FL-100 SMD Manuel utilisateur

Cooper Wheelock

Cooper Wheelock XB12 Manuel utilisateur

Allen + Roth

Allen + Roth 17624-000 Manuel utilisateur

ADJ

ADJ 4 STAGE PAK Manuel utilisateur

Cooper Lighting

Cooper Lighting EGL91SW233 Manuel utilisateur

Max

Max 37496 Manuel utilisateur

BEGA

BEGA 85 143 Manuel utilisateur

Beamz

Beamz 151.226 Manuel utilisateur

EuroLite

EuroLite LED IP FL-8 Manuel utilisateur

Ledj

Ledj PERFORMER 36 RGB Manuel utilisateur

Perel

Perel ELS3 Manuel utilisateur

Perel

Perel ELS3WD Manuel utilisateur

LumX

LumX LM 36130 Manuel utilisateur

Xtricity

Xtricity 4-80053 Manuel utilisateur

Stahl

Stahl 6521/4 Series Manuel utilisateur

Ecosense

Ecosense EcoSpec Manuel utilisateur

Ayrton

Ayrton minipanel FX Manuel utilisateur