Adding New Peripheral Devices to the Extender
8 WeR@Home™ Smart Extender
3. Adding New Peripheral Devices to the Extender
You can add up to 63 devices to an extender.
Adding a new peripheral device to the extender involves:
Adding each device to WeR@Home™ by pairing the device with the extender
Installing the device in the chosen location
To add a device:
1. Tap . The main menu appears.
2. Tap DEVICES. The Devices screen appears.
3. Tap Add device. The Add New Devices screen appears displaying a list of the available device
types.
4. Select a device type. The Connect to screen appears displaying the hub and extenders.
NOTE: If you select a device which must be connected to the hub, the Connect
to screen is not displayed, and instead the Pairing screen appears.
5. Tap the extender you want to add the device to. The Pairing screen appears and WeR@Home™
scans for the device.
6. Place the device close to the extender.
7. If the device has a tamper switch, activate the tamper.
8. Insert the batteries.
9. When prompted by the app, enter the device’s system name and/or location and other device
attributes.
10. Tap OK.
11. If you want to configure the device, tap Configure. Refer to ESUGSL018 WeR@Home™User Guide.
12. Install the device in the chosen location. Refer to ESUGSL019 WeR@Home™Installation Guide.
