Espy Embedded Digital Video Recorder Manuel utilisateur
Professional Series (A)
www.espyindia.com
1
EMBEDDED DVR USER MANUAL
Thank you for purchasing our ESPY Professional Series Standalone DVR. Please go through this User Manual
before operating so as to use the DVR in the correct and safe way.
The content of this manual is subject to change without notice.
Professional Series (A)
www.espyindia.com
2
1 PRECAUTIONS
Please observe the following precautions, in order to avoid damage or loss of data caused by improper
operation.
Install DVR within the temperature and humidity requirements.
Do not install DVR in humid, dusty or smoky environment.
Require a solid mounting surface for installation.
Do not block any ventilation openings. Install under the manufacturer's instructions.
Do not spill liquid of any kind on device.
Do not put any other equipment on device.
Do not dismantle the device.
Select specified HDD by manufacture.
2 NOTE
This user manual is for reference only, subject to available products.
This user manual may contain inaccurate data or printing error.
Updates to the manual or products themselves will occur without further notification.
Contact the customer service department when you are in doubt or documentations.
Professional Series (A)
www.espyindia.com
3
Table of Contents
1 PRECAUTIONS 2
2 NOTE 2
3 PRODUCT INTRODUCTION 5
3.1 SUMMARY 5
3.2 FEATURES 5
4INSTALLATION 6
4.1 CHECK DVR AND ITS ACCESSORIES 6
4.2 HDD INSTALLATION 6
4.3 FRONT PANEL 7
FRONT PANEL 7
REAR PANEL 8
REAR PANEL I/O PORT CONNECTION 9
5 LOCAL OPERATION GUIDE 11
5.1 POWER ON /OFF OPERATION 11
5.1.1 POWER ON 11
5.1.2 POWER OFF 11
5.1.3 OUTAGE RECOVERY 11
5.2 LOGGING INTO THE MAIN MENU 12
5.3 LIVE VIEW 12
5.4 PTZ CONTROL 13
5.4.1 PTZ CONTROL 13
5.4.2 PTZ SETTING 14
5.5 RECORDING OPERATION 16
5.6 PLAYBACK 17
5.6.1 FASTAND SLOW MOTION 18
5.6.2 BACKWARD AND SINGLE FRAME PLAYBACK 19
5.7 CONFIGURATION 19
5.7.1 SETTING 19
5.7.2 CHANNEL MANAGEMENT 20
5.7.3 NETWORK SETTING 21
5.7.4 ALARM CONFIGURATION 24
5.7.5 USER MANAGEMENT 26
5.7.6 EXCEPTIONS SETUP 27
5.8 STORAGE 28
Professional Series (A)
www.espyindia.com
4
5.8.1 HDD MANAGEMENT 28
5.8.2 RECORD BACKUP 29
5.9 UTILITIES 30
5.9.1 PTZ CONFIGURATION 30
5.9.2 ALARM OUTPUT 31
5.9.3 PORT CONFIGURATION 31
5.9.4 OUTPUT 32
5.10 MAINTENANCE 33
5.11 SHUTDOWN 35
6 ON-LINE OPERATION 36
6.1 WEB OPERATION GUIDE 36
6.1.1 NETWORK CONNECTION 36
6.1.2 CONTROL SETUP & LOG IN / LOG OFF 36
6.1.3 LIVE VIEW 38
6.1.4 PTZ CONTROL 38
6.1.5 SYSTEM SETTING 39
6.1.6 SEARCH RECORD 40
6.2 CLIENT OPERATION GUIDE 41
7 APPENDIX 41
7.1 HDD CAPACITY CALCULATION 41
7.2 REMOTE CONTROL OPERATION 42
7.3 MOUSE CONTROL 42
7.4 TROUBLESHOOTING 43
Professional Series (A)
www.espyindia.com
5
3 PRODUCT INTRODUCTION
3.1 SUMMARY
Our Embedded Digital Video Recorder is an excellent digital surveillance product which adopts H.264 video
compression, hard disk recording, TCP/IP transmission, and a Linux based OS in addition to some of the more
advanced technologies in the information technology industry. This enables a more stable, reliable and high
picture quality.
These products up to the GB 20815-2006《Surveillance DVR》, support synchronized video and audio
recording, playback, and monitoring. This series also supports network based system control, as well as
excellent network streaming capabilities.
3.2 FEATURES
Features switched according to the soft/hardware edition.
Live surveillance
composite video signal (BNC) or VGAoutput
Live video by monitor, TV or display devices
Single screen / four-screen / nine-screen / sixteen-screen output
Privacy masking, character overlay, unusual states message,
Compression
Apply H.264 video compression and G.711 audio compression.
Recording
Motion detection, alarm linkage recording mode, SATA HDD and SMART tech of local HDD.
USB backup or network backup.
Playback
Video searching, playback, and backup via head end or web interface.
Multiple playback modes: slow motion, fast forward, frame by frame and skip backward.
Network backup or USB 2.0 ports for backup devices.
Multi-channel playback synchronization
Camera control & Alarm
PTZ (using RS-485), camera control, preset, tour, pattern setting and call.
Three-dimensional positioning ( in PTZ condition )
Alarm management
Multi-channel alarm inputs could be connected with standard devices such as infrared, smoke
detection, vibration alarm.
Professional Series (A)
www.espyindia.com
6
Alarm detection for motion, video loss and masking.
Multi-channel alarm outputs which link alarm with light control.
Interface
USB2.0, Ethernet interface, RS485, etc.
Network
Support TCP/IP and TCP, UDP, RTP transmission.
Support online real-time surveillance and record search, playback, manage.
Support dynamic IP addressing, PPPOE, DDNS
Access DVR by WEB interface (Internet Explorer)
NTP timing, alarm by Email, etc.
Operation
Support front panel, remote control and mouse control.
Simple operation, menu driven with help tips.
4 INSTALLATION
4.1 CHECK DVR AND ITS ACCESSORIES
Please carefully check the contents following the packing list. If any of the items are missing, please contact
with your dealer.
4.2 HDD INSTALLATION
Preparation:
A Phillips head screwdriver is required to disassemble and reassemble the unit.
This series DVR allows a maximum 2 Hard disks. HDD capacity is tested up to 2TB at the time of writing
Steps:
Remove the metal top cover by removing two screws from the sides of the cover.
Place the hard disks on a flat table and fasten it by screws.
Connect the power and data cables to the HDD.
Reinstall the metal top cover and fasten it by screws.
Caution:
Only use HDD specified by the manufacturer.
HDD will be formatted automatically during startup, it may cause data loss.
Recording duration is decided by HDD capability and DVR parameters (recording setup, encoding setup).
Please see the form in Chapter 7.1（for reference only）.
Professional Series (A)
www.espyindia.com
7
4.3 FRONT PANEL
Front Panel
The front panel of R8702/R9702 is shown as follow：
Name
Icon
Function
Power button
Press this button to boot up or shut down DVR.
Shift
Shift
In textbox, click this button to switch between numeral, character and other
functions.
Up/Down
Activate current control switch, and then move up and down;
Modify setup, Increase/decrease numeral;
Channels can be switched while playing single channel record;
Assistant function (Such as PTZ menu), performs as direction control for PTZ;
In textbox, enter the number, increment +1 and decrement -1;
Multi-screen switch.
Left/Right
Activate current control switch, and then move left and right;
Press left/right buttons to control the playback progress bar when playback video;
Performs as direction control for PTZ;
Unilaterally switch.
Enter
ENTER
Confirm current operation; Go to menu.
ESC
ESC
Go to previous menu, or cancel current operation.
Record
REC
Manually stop/start recording, in the video control menu, working with direction
keys or numeral keys to select the recording channel.
Auxiliary
Fn
In single-camera monitor mode, click this button to display auxiliary function: PTZ
control and image color setting;
In motion detection setup, working with Fn and direction keys to realize setup;
Backspace function: press Fn for 1.5seconds to delete the previous character
before the cursor;
When textbox selected, continuously press this button to switch between
numeral, English character(small/capitalized) , Chinese input(expandable) etc;
Professional Series (A)
www.espyindia.com
8
Realize other special functions.
Slow play
Various slow speeds and normal playback;
Perform as zoom- function for PTZ control.
Fast play
Various fast speeds and normal playback;
Perform as zoom + function for PTZ control.
Play/Pause
In playback mode, click this button to play or pause playback.
Perform as Iris- function for PTZ control
Reverse/Pause
In playback mode, click this button to reverse or pause playback
Perform as Iris+ function for PTZ control
Play Next
In playback mode, playback the next video
Perform as Iris+ function for PTZ control
Play previous
In playback mode, playback the previous video
Perform as Iris- function for PTZ control
USB
To connect USB mouse，Mobile HDD，USB storage device, etc.
Network abnormal
indication light
Net
The NET light indicates the network is connected normal
HDD abnormal
indication light
HDD
The video light indicates recording
Remote control
receiver
IR
Used to receive the signal from the remote control
Power indication
light
power
Light will be on after power up
Alarm indication light
Alarm
Show whether there is external alarm input. Light on means there are external
alarm, light goes out means external alarm stopped
Rear Panel
Professional Series (A)
www.espyindia.com
9
Rear panel I/O port connection
1 2 3 8 5 4 6 7
Only used for 1080P
1 2 10 3 5 4 6 7
1 2 10 3 4 6 7
5 8
1 2 3 4 2
1 3 4 1
2 2
Professional Series (A)
www.espyindia.com
10
Rear panel I/O interface information：
Serial Number
Name
Description
1
Alarm input
Alarm input port, connected to the alarm.
2
GND
Ground port
3
Alarm output
Alarm output port
4
RS-485
RS-485 port, connected to the PTZ.
Alarm input connection
Normal open or Normal close type
Please parallel connect COM end and GND end of the alarm detector to the GND end of the DVR
Please connect the NC port（or NO port）of the alarm sensor to the DVR alarm input(ALARM)
Use the same ground with that of DVR if you use external power to the alarm device.
Alarm output connection
This alarm output use relay output, please refer to the related parameters while connecting the relay to avoid
overload or damage to the DVR.
Material of the touch
Silver
Electrical functions
Maximum switch power
240VA，48W
Maximum switch voltage
125VAC，60VDC
Maximum switch currency
2A
Figure 4-1 Relay parameters
PTZ connection
DecoderA(B) line connects with DVR RS-485A(B) line. If multiple decoders are connected, please connect a 120
Ω resistance in parallel at the A (B) line distal to minimize the control signal distortion caused by reflection.
1 3 4 1 2
Table des matières
