ESIT ECI Manuel utilisateur

ECI Multi Functional Weighing Controller Operating Manual

Page 2

Esit Technical Support

Esit Support Line for Turkey

GSM : 0533 732 15 74

Email: [email protected].tr

Istanbul

Phone: Direct Line 0216 585 18 88 / 0216 585 18 18 Extension: 141 /142

Fax : 0216 585 18 89

Hendek

Phone: 0264 614 16 41 / 0264 614 16 42

Fax : 0264 614 16 43

Izmir

Phone: 0232 433 02 99

Fax : 0232 433 12 42

Ankara

Phone: 0312 397 01 10

Fax : 0312 397 07 73

Adana

Phone 0322 428 11 71

Fax : 0322 428 11 72

Esit Istanbul Head Office

Address Nişantepe Mahallesi Handegül Sokak No:6 Çekmeköy 34794 Istanbul

Phone: 0216 585 18 18

Fax : 0216 585 18 19

E-mail: esit@esit.com.tr

ECI Multi Functional Weighing Controller Operating Manual

Page 3

ECI Multi Functional Weighing Controller Operating Manual

Page 4

•Do not power-up the device before making sure that the device connections are made according to this

manual.

•Do not open the case or disconnect-insert the connections before disconnecting the device from the power

source.

•Note that the load cell and communication cables are not very close to the energy lines.

•Note that the cables are not crushed.

•Operate the device within the stated temperature range.

•The device has been developed for indoor use. Do not expose sunlight, rain and other external factors.

1 Considerations

ECI Multi Functional Weighing Controller Operating Manual

Page 5

Table of Contents

1 Considerations...........................................................................................................................................................4

2 Introduction..............................................................................................................................................................15

3 Physical Dimensions................................................................................................................................................17

4 Specifications...........................................................................................................................................................19

4.1 Technical Specifications....................................................................................................................................19

4.2 Use Properties...................................................................................................................................................20

5 Installation and Connections....................................................................................................................................22

5.1 Standard Modules .............................................................................................................................................24

5.1.1 Slot1: Terminal (Supply and Communication Module).................................................................................25

5.1.2 Slot2: Weighing (Load Cell) Module...........................................................................................................28

6 Screenshots.............................................................................................................................................................32

6.1 Weighing Main Screen ......................................................................................................................................32

6.1.1 Screen Layout.............................................................................................................................................33

ECI Multi Functional Weighing Controller Operating Manual

Page 6

6.1.2 Symbols......................................................................................................................................................33

6.1.3 Keys............................................................................................................................................................35

6.2 Menu Screen.....................................................................................................................................................36

6.2.1 Screen Layout.............................................................................................................................................36

6.2.2 Symbols......................................................................................................................................................37

6.2.3 Keys............................................................................................................................................................38

6.3 Change Parameter Screen (Numeric or Alpha-Numeric Entry Type) .................................................................39

6.3.1 Screen Layout.............................................................................................................................................39

6.3.2 Symbols......................................................................................................................................................40

6.3.3 Keys............................................................................................................................................................40

6.4 Change Parameter Screen (Selective Type)......................................................................................................42

6.4.1 Screen Layout.............................................................................................................................................42

6.4.2 Symbols......................................................................................................................................................43

6.4.3 Keys............................................................................................................................................................43

ECI Multi Functional Weighing Controller Operating Manual

Page 7

6.5 Ordered Menu Screen.......................................................................................................................................44

6.5.1 Screen Layout.............................................................................................................................................44

6.5.2 Symbols......................................................................................................................................................45

6.5.3 Keys............................................................................................................................................................46

6.6 Confirmation Screen..........................................................................................................................................47

6.6.1 Screen Layout.............................................................................................................................................47

6.6.2 Symbols......................................................................................................................................................48

6.6.3 Keys............................................................................................................................................................48

6.7 Message Screen ...............................................................................................................................................49

6.7.1 Screen Layout.............................................................................................................................................49

6.7.2 Symbols......................................................................................................................................................50

7 Using the Device......................................................................................................................................................52

7.1 Program Selection.............................................................................................................................................53

7.1.1 Start-up Screen...........................................................................................................................................53

ECI Multi Functional Weighing Controller Operating Manual

Page 8

7.1.2 Program Selection Screen ..........................................................................................................................54

7.2 Menu List...........................................................................................................................................................55

7.3 Using the Menu.................................................................................................................................................56

7.3.1 Terminal Menu............................................................................................................................................56

7.3.2 Weighing Menu...........................................................................................................................................85

7.3.3 Optional Communication Menu.................................................................................................................104

7.3.4 Optional In/Out Menu................................................................................................................................116

7.3.5 Optional In/Out Menu................................................................................................................................124

7.3.6 Optional Expansion Menu.........................................................................................................................133

7.4 Indication Program ..........................................................................................................................................140

7.4.1 Zeroing .....................................................................................................................................................140

7.4.2 Tare..........................................................................................................................................................140

8 Calibration .............................................................................................................................................................141

8.1 Load Calibration..............................................................................................................................................141

ECI Multi Functional Weighing Controller Operating Manual

Page 9

8.2 mV/V Calibration .............................................................................................................................................146

8.3 Coefficient Calibration .....................................................................................................................................150

8.4 Zero Calibration...............................................................................................................................................153

9 Software Update....................................................................................................................................................157

10 Annex 1: Optional Modules..................................................................................................................................162

10.1 Slot3 (Optional Communication Slot) :...........................................................................................................162

10.1.1 E-MDL-COM (Serial Communication Module):.......................................................................................162

10.1.2 E-MDL-PRF ............................................................................................................................................166

10.2 Slot4 (Optional Input/Output Menu): ..............................................................................................................167

10.2.1 E-MDL-RLY (Relay Module):...................................................................................................................167

10.2.2 E-MDL-DAC (Analogue Output Module):.................................................................................................169

10.3 Slot5 (Optional Input/Output Menu) ...............................................................................................................172

10.4 Slot6 (Optional Expansion Slot).....................................................................................................................172

10.4.1 E-MDL-BCD (Binary Output Module).......................................................................................................172

ECI Multi Functional Weighing Controller Operating Manual

Page 10

10.4.2 E-MDL-EXP (Relay Expansion Module).................................................................................................175

11 Annex 2: Batching Program .................................................................................................................................180

11.1 System Operation..........................................................................................................................................180

11.2 Batching Program Screen..............................................................................................................................182

11.2.1 Screen Layout.........................................................................................................................................183

11.2.2 Keys........................................................................................................................................................185

11.3 Batching Program Status Messages..............................................................................................................186

11.4 Batching Menu ..............................................................................................................................................187

11.5 Batching Menu Usage...................................................................................................................................188

11.6 Batching Program Application........................................................................................................................205

11.6.1 Up to 4 Silos ...........................................................................................................................................205

11.6.2 Up to 16 Silos..........................................................................................................................................205

11.6.3 Batching Connections.............................................................................................................................205