04 Specifications
Model
Input Voltage
Operating Power
Decay Time
Ion Balance
Technology
Emitter Material
Alarm Display
Signal output
Air volume
Ozone
Operating Env.
Dimension
Net weight
Case material
Warranty
Certification
DC0601C
DC24V±5%
Approx. 4.5W
Approx 2.0s ( 30 cm distance, maximum air volume, No dust filter)
±10V
±20V 30CM Distance
Steady-state DC ionization technology
Tungsten
Operation indicator, high voltage normal indicator, high voltage
abnormal indicator, red indicator
When the high voltage is abnormal, the red light will be on, and the
DC24V signal will be output.
0.7m³/min
Below 0.004ppm (distance 150mm)
0-40°C 20-75%RH（non condensing）
117*83*64mm Without bracket 138*115*64mmWith bracket H*W*D
Aprpox 0.4Kg
ABS Shell + aluminum alloy oxide bracket
One year
Compact Ionizer
Eliminate static electricity speed 30CM＜3.0sec
±20V ion balance, 30cm distance
Suction type design (fan at the front and
discharge emitter at the back)
Both sides buckles design
The discharge emitter can be cleaned with
alcohol cotton through the rear grille
Tungsten material discharge needle
Alarm and equipment monitoring interface
DC24V Input
Meet cleanliness requirements
Features
Small size provides fast static elimination in
limited space
Fast elimination speed
Automatic balance, no need to adjust
Positive and negative ions are more evenly
distributed
The blowing angle can be locked to prevent the
fuselage from sliding to change the blowing angle
Easy maintenance
longer service life
When the high voltage is abnormal, the red light
will be on and the buzzer will sound and output
DC24V signal
Can be powered by device power
Small space is required, reducing the impact on
laminar wind
Benefits
