Escient FireBall SE-80 Guide de l'utilisateur
SE-80 DIGITAL MUSIC MANAGER
START UP GUIDE
P/N: M32001-01A1
THANK YOU
The team at Escient would like to take this opportunity to thank you for purchasing an Escient
FireBall product. Escient is committed to providing our customers the most technologically
advanced, yet easier-than-ever to use products that converge the power of the Internet with home
entertainment.
To maximize your enjoyment, please take a few minutes to review this Start Up Guide. It will
guide you through all the features and benefits of your new FireBall.
If you should need assistance please call our Customer Support Staff at 800.372.4368
INTRODUCTION
This FireBall Manual is intended to provide the reader with an overview of the main
features and benefits of the Escient FireBall Music Management System. For more detailed
instruction and technical information, please refer to the Support section of the Escient web
site (www.escient.com/support).
DISCLAIMER
At the time of printing, the FireBall screenshot images in this manual matched the FireBall in-
terface screens. However, since FireBall has the capability of downloading software updates and
enhancements on a regular basis, the resulting screen updates may no longer match the images in
this manual.
This manual is copyright ©2005 by D&M Holdings and Escient. All rights reserved.
WARNINGS AND PRECAUTIONS
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
• To reduce the risk of electric shock, do not remove the cover. No user serviceable parts are inside.
Refer servicing to qualified service personnel.
• To prevent electric shock, do not use a 3 wire to 2 wire adapter plug.
• A three prong grounded outlet is required.
• You are cautioned that any change or modification not expressly approved in this manual or approved
in writing by an authorized representative of Escient could void your warranty and/or your authority to
operate this equipment.
• Prolonged use of any video device which produces a static (non-moving, non-changing) or repetitive
image on your projector, television or plasma display device can cause “screen burn-in”. You are
encouraged to leave the FireBall screen-saver turned on and set to the lowest possible “time-out”
duration. Warning: This device uses the mains plug as the means to disconnect the unit, this unit
remains powered unless disconnected from the mains source.
SE-80 START UP GUIDE
INSTALLATION
1) Unpack the FireBall, cables, and accessories. Install the
included batteries into the remote. Write down the FireBall se-
rial number (located on the back) here:
SERIAL NUMBER: _________________________________
CONTENTS
FireBall
IR Remote Control (batteries included)
Analog Audio/Composite Video Cable (red, white, and yellow)
Ethernet Cable
Power Cable
Start Up Guide
PAGE 1
SE-80 START UP GUIDE
INTERNET
ROUTER
PC OR MAC
AUDIO INVIDEO IN
2) Connect FireBall to your A/V Receiver and TV
A)Locate the included Analog Audio/Composite Video Cable.
B)Connect FireBall to any available A/V input on your receiver
or TV
Note: You may use optional s-video or component video cables and optional digital audio cables for
the best picture and sound quality. Contact your Escient dealer for more information
3) Connect FireBall to your network using the included Ethernet
cable.
PAGE 2
SE-80 START UP GUIDE
4)Connect FireBall to an AC outlet using the included power
cord.
Note: The power LED on the front of the FireBall will begin to flash. The power LED will turn solid RED
once the FireBalll has completed its initialization process indicating the unit is in standby.
5) Press the POWER button on the front panel or on the remote
control. The LED will turn solid BLUE and video will be dis-
played on the TV when the unit is on. Follow the instructions
on the screen to complete the setup procedure.
PAGE 3
SE-80 START UP GUIDE
CODE SET
Code Set - used to set the
universal IR source buttons. See
manual for details.
UNIVERSAL SOURCE SELECT
TV / Cable / Receiver / DVD
- used to configure the remote
to control other devices. See
manual for details on the univer-
sal remote functions.
MODE GUIDE SELECT
Movies / iRadio / Music - used to
select FireBall modes.
TRANSPORT CONTROLS
Rewind / Play / Forward / Record
/ Stop /
Pause - used to control playback
of movies and music. Also used
for text entry and for canceling
certain operations.
GUIDE
Guide / Player - toggles between
Guide and Player screens.
INFO
Info - displays additional movie
and music info
VOLUME CONTROL
Volume Up / Volume Down /
Mute - Universal remote can be
configured to operate volume on
TVs and receivers. See manual
for detailed setup steps.
KEY PAD
Alpha / Numeric / Enter - used
for entering numbers and text.
Also used for searching in the
movies, music and radio guides.
CONTROL
Mode - changes music play
modes: normal, random, repeat
etc.
Setup - displays Setup menu.
POWER
Power - used to toggle the cur-
rent source device on and off.
FIREBALL SELECT
FireBall 1 / FireBall 2 / FireBall
3 / FireBall 4 - use FB1 to
control the FireBall. Use other
FB buttons if additional FireBall
products are installed.
ALL / NONE
Toggle ALL or NONE on Select
Guides.
NAVIGATION & SELECT
Up / Down / Left / Right / Select
- used to navigate and select on-
screen menus and buttons.
VIEW / MENU
View / Menu - toggles through
various Guide Views (artist, title,
cover).
CONTROL
Options - displays Options menu.
CHANNEL / PAGE CONTROL
Channel/Page Up/Down - used
to page up and down in Guide
and Player screens.
MACRO FUNCTION
Macro Function - used to directly
access various music, movie and
radio items and controls.
DISC PLAY FUNCTIONS
Previous / Next - skip disc
functions.
MUSIC PLAY FUNCTIONS
Repeat / Random - used to
cause the system to play the
current group/genre in repeat or
random playback mode.
MUSIC FAVORITES
Add-Favorites / Play-Favorites
- used to add the currently
highlighted music track to the
Favorites playlist and to play the
favorites playlist.
PAGE 4
REMOTE CONTROL
SE-80 START UP GUIDE
MUSIC MANAGEMENT
Recording Using the Internal CD Drive
Insert a CD into the internal CD drive, press the RECORD button, and follow the instructions on
screen.
Importing Music Files
Transfer music files from a Windows XP PC or Mac OS X computer into your FireBall over the
network. Make sure the music files are MP3 format with ID3v2.3 tags or WMA format with ASF
tags. Replace MyFireBall with the name of your FireBall or it’s IP address. Name your FireBall
using the SETUP/Network/Server Settings Menu. Connect to your FireBall just as if it were
another PC by selecting “Run” from the Start Menu and entering \\FireBall Name or IP address.
INTERNET
ROUTER
PC OR MAC
PAGE 5
SE-80 START UP GUIDE
Browsing the Music Library
Use the Music Guide to browse your Music Library. Press the LEFT or RIGHT arrow buttons on
the remote control to change Genres or view All of your Music in one list. Press UP or DOWN
buttons to highlight any Album or Song in the list. Use the PAGE UP or DOWN buttons to
advance through all your music. Press SELECT to expand the highlighted Album or press PLAY
to play the Album or Song.
Use the VIEW button to view the Music Library alphabetically by Album Title, Artist Name,
Song Name, or Album Cover Art.
PAGE 6
SE-80 START UP GUIDE PAGE 7
Playing Music
The currently playing Album, Artist, Song, and Cover Art appear in the Music Player screen. Use
the Up and Down buttons to highlight a different song. Press SELECT to play the highlighted
song. Press the GUIDE button to return to the Music Guide.
Music Options
Press the OPTIONS button to edit and manage your music collection. The Options menu allows
you to create, edit, and delete Groups, Playlists, and Music files. You can also change the current
play mode and change other options for the music source.
SE-80 START UP GUIDE
INTERNET RADIO
Browsing Internet Radio
Stations
Use the Radio Guide to browse your
Internet Radio Stations. Press the
RADIO button to access the Internet
Radio Guide (press the MUSIC
button to return to the Music Guide).
Press the LEFT or RIGHT arrow
buttons on the remote control to
change Genres or view All of your
Stations in one list. Press the UP or
DOWN buttons to highlight any sta-
tion in the list. Press PLAY to connect
to and start playing the station.
Playing an Internet Radio
Station
The currently playing Radio Station
appears in the Radio Player screen.
Press the GUIDE button to return to
the Radio Guide.
Radio Options
Press the OPTIONS button to edit
and manage your Internet Radio sta-
tions. The Options menu allows you
to create, edit, and delete Groups and
Radio stations.
PAGE 8
Autres manuels pour FireBall SE-80
1
Table des matières
Autres manuels Escient Serveur
