ersa IR 650 A Manuel utilisateur
Operating Instructions
ERSA IR 650 A and PL 650 A
Semi-Automatic SMD/BGA Rework System
ERSA GmbH
Leonhard-Karl-Str. 24
97877 Wertheim / Germany
Service Phone +49 9342/800-147
Fax +49 9342/800-256
Internet www.ersa.com
Document 3BA00143 Rev.2
Operating Instructions
ERSA IR / PL 650 A
ERSA IR / PL 650 A / Page 2 Document 3BA00143 Rev.2
Contents
1. Introduction 4
1.1 General product information 4
1.2 General information about the operating instructions 4
1.3 Proper use 5
2. Technical data 6
2.1 IR 650 A basic unit 6
2.2 ERSA PL 650 A 7
3. Safety instructions 8
3.1 Aggregates and interfaces 8
3.2 Safety instructions for handling the system 11
4. Transport, storage, assembly, and disposal 12
4.1 Scope of supply 12
4.2 Transport and storage 12
4.3 Assembly 13
4.3.1 Setting up the system 13
4.3.2 Mechanical connections 14
4.3.2 Electrical connections 15
4.4 Disposal 16
5. Commissioning 17
5.1 Switching on for the first time 17
5.2 IRSoft installation 17
6. Function description 18
6.1 The IRSoft user Interface 18
6.2 Device controls 19
6.2.1 IR 650 A 19
6.2.2 PL 650 A 19
6.3 Parameter Window 20
6.3.1 Current profile parameters 20
6.2.3 RPC 650 A 20
6.3.2 Measured value and threshold value sensors 21
6.3.3 Specifying threshold value functions 21
6.3.4 System settings 21
6.3.5 The status display 22
6.3.6 The information window 22
6.4 Profile settings 23
6.4.1 Setting the profile parameters 23
6.4.2 Setting the heating element configuration 24
6.4.3 Saving, loading, and managing profiles 24
6.5 Desoldering a component 26
6.6 Placing the component and soldering 28
6.7 The optimal profile 31
7. Troubleshooting 33
8. Maintenance 34
8.1 Cleaning 34
8.1.1 IR 650 A 34
8.1.2 PL 650 A 34
8.2 Replacing a silicon suction cup on the IR 650 A 34
9. Spare parts and wearing parts 35
9.1 ERSA IR 650 A 35
9.2 ERSA PL 650 A 36
Operating Instructions
ERSA IR / PL 650 A
Document 3BA00143 Rev.2 ERSA IR / PL 650 A / Page 3
Copyright
This operating manual is only for service, mounting and operating personnel.
Operating manual, ERSA GmbH all rights reserved.
Neither the complete documentation nor parts of it may be reproduced or used for competitive
purposes without prior permission of ERSA GmbH.
Actions to the contrary constitute an obligation for compensation of damages.
Operating Instructions
ERSA IR / PL 650 A
ERSA IR / PL 650 A / Page 4 Document 3BA00143 Rev.2
1. Introduction
1.1 General product information
The ERSA IR / PL 650 A Rework System has been especially developed for extremely large and high-
mass printed circuit boards.
The dynamic heating technology of the IR 650 A, based on ERSA IR technology, offers extensive pos-
sibilities, even for repairing complex components and printed circuit boards. Individual profile design,
as well as high repetitive precision through automatic process control, extending to component cooling,
intelligent measurement technology, and multiple closed loop technology enable ideal process results,
even for lead-free applications. The integrated reflow process camera rounds out the process reliability
aspects of the IR 650 A. The IR 650 A is ideally supplemented with the PL 650 A placement system. With
the PL 650 A secure placement of even the smallest, multi-position components succeeds in no time.
Here as well, state-of-the-art cameras and drive technology support the user and ensure optimal compo-
nent placement.
Through the flexible, and for the most part automatic operation of the IR / PL 650 A, cycle times can be
significantly reduced in comparison to cycle times achieved with traditional rework systems.
1.2 General information about the operating instructions
The operating instructions are designed to provide the owner of the rework system with complete infor-
mation concerning the product, its set-up and commissioning, basic machine functions, malfunctions and
malfunction resolution, maintenance, as well as spare parts and wearing parts.
Before placing the machine in service, you must carefully read and have understood the section
on safety. Our service department is available to respond to any questions and problems you
might have with this product.
Explanation of symbols
This symbol warns of electric shock hazard. Touching voltage-conducting parts can
result in serious bodily injuries which can be fatal.
This symbol warns of hazards of any type that can result in bodily injuries that can be
fatal.
This symbol indicates a hazard of burn injuries caused by touching hot objects or ma-
chine parts.
ATTENTION! Attention indicates instructions, which if not complied with, result in damage to the sol-
dering machine or other material damages!
Operating Instructions
ERSA IR / PL 650 A
Document 3BA00143 Rev.2 ERSA IR / PL 650 A / Page 5
1.3 Proper use
The ERSA IR / PL 650 A rework system has been built in accordance with the state of the art and stan-
dard health and safety regulations. Residual hazards can exist with the system, particularly if it is oper-
ated improperly by untrained personnel, or if it is used for purposes for which it is not intended (proper
use).
The ERSA Rework System has been designed exclusively for the placement of electronic components
and subsequent soft soldering (selective reflow soldering) of electronic assemblies that are suitable
for this process. Any other use, or use exceeding this specification, is considered to be improper. The
manufacturer/supplier assumes no liability for damages resulting from improper use.
Proper use also includes compliance with the Operating Instructions, including all of the safety instruc-
tions.
Unauthorized reconstructions and/or modifications that influence the safety of the ERSA Rework Sys-
tem are prohibited, and the manufacturer/supplier is not liable for any damages resulting from such
additions or modifications.
The system is designed exclusively for commercial use. Private use is excluded.
Operating Instructions
ERSA IR / PL 650 A
ERSA IR / PL 650 A / Page 6 Document 3BA00143 Rev.2
2. Technical data
2.1 IR 650 A basic unit
Device dimensions
Length: 794 mm
Width: 602 mm
Height: 462 mm
Weight: approximately 75 kg
Electrical data
Voltage: 1 x 230 V / N / PE
Voltage tolerance +6 % / -10 %
Frequency: 50 / 60 Hz
Rated power: 3600 W without PC
Protection class I
Upper heating element
IR upper heating element output 4 x 300 W
4 separately switched heating zones
Maximum heating element surface 120 x 60 mm
Upper heating element with motorized positioning
Lower heating element
Lower heating element output 2 x 800 W + 4 x 400 W
5 separately switched heating zones
Maximum heating element surface 350 x 470 mm
IR heating element wavelength 2 - 5 µm
Control
Controlled via a PC
(Windows 2000 or XP required)
Universal Serial Bus (USB) interface
Integrated 4-character LED display
Temperature measurement
1 x IR sensor
4 x thermocouple channel(K-type, potential-free)
Additional data
Component size 1 x 1 mm to 60 x 60 mm
Maximum PCB size 460 x 560
Environmental specifications
Operating temperature: 0 – 40 °C
Relative humidity: 0 – 80 %
Temperature increase in the process to 2.5 K/sec.
Maximum stroke 70 mm
Working distance
From the PCB to the upper heating element 60 mm
From the PCB to the work table 140 mm
Volume flow int. cooling fans
Upper 182 m³/h lower 120 m³/h
Vacuum nozzle switching point
Up to 15 mm above the upper edge of the PCB.
Operating Instructions
ERSA IR / PL 650 A
Document 3BA00143 Rev.2 ERSA IR / PL 650 A / Page 7
2.2 ERSA PL 650 A
Device dimensions
Length: 600 / 700 mm
Width: 200 mm
Height: 520 / 690 mm
Weight: approximately 21.5 kg
Electrical data
Via external power supply 1 x 100-230 VAC
Supply voltage: 24VDC / 50 W
Frequency: 50 / 60 Hz
Visionbox
Component size 1x1 mm to 60 x 60 mm
Split optics optional for QFP processing
Component placement force app. 2 N for Auto
Pick&Place, or position controlled.
Illumination LED row light (each side separately
adjustable for component and PCB)
LED ring light for RPC camera (adjustable)
RPC camera
Illumination: LED ring light white (adjustable)
Camera: CCD color camera
Focus: 25x optical 12x digital
Swivel area: 180°
Interface: System bus
Operating Instructions
ERSA IR / PL 650 A
ERSA IR / PL 650 A / Page 8 Document 3BA00143 Rev.2
3. Safety instructions
3.1 Aggregates and interfaces
The interfaces and aggregates of the IR 650 A = PL 650 A are shown in the following photo.
IR 650 A displays
DIGITAL 2000 A
display
Upper heat-
ing element
Lower heating
element
Placement
table with
change-frame
Placement
head
Illumination
Switch for
IR 650 A
RPC module
Placement table fine adjustment
IR temperature
sensor
Display of the integrated DIGITAL 2000 A soldering station
The display with the three buttons represents a complete DIGITAL 2000 A soldering sta-
tion. The respective soldering iron is connected to the side connector. Operating and safety
instructions for this unit are in the included ERSA DIGITAL 2000 A Operating Instructions.
Placement head
The placement head positions the respective component on the PCB in conjunction with
IRSoft
Attention crushing hazard!
When placing components do not reach between placement head and PCB.
Video output
USB interface
* PC, monitor, mouse, and keyboard are not include in scope of supply
Switch for
illumination
Operating Instructions
ERSA IR / PL 650 A
Document 3BA00143 Rev.2 ERSA IR / PL 650 A / Page 9
Upper heating element
The required heat from above for soldering/desoldering electronic components is generated
via this aggregate. Temperature selection is specified via the IRSoft control software.
Attention burn hazard!
Upper heating element and surrounding housing parts reach high temperatures dur-
ing a soldering process.
Placement table
Via the placement table the PCB is aligned so that the placement head places the compo-
nent precisely on the PCB.
Lower heating element
The required heat from below for soldering/desoldering electronic components is generated
via this aggregate. Temperature selection is specified via the IRSoft control software.
Attention burn hazard!
Lower heating element and surrounding housing parts reach high temperatures dur-
ing a soldering process.
Fine adjustment
Use the fine adjustment to precisely position the placement table.
IR temperature sensor
The sensor detects the surface temperature of the component that will be soldered/desol-
dered, in a contactless process.
Reflow process camera
The reflow process camera provides a live image of the soldering process to the monitor.
The optionally available IDView or Imagedoc software is necessary for this application.
Illumination
The lighting provides optimal, glare-fee illumination of the workstation. It can be switched on
or off via the side-mounted switch.
Switch for illumination
The switch activates or deactivates the system illumination.
IR 650 A display
The display shows the current actual temperature of the selected temperature sensor.
Operating Instructions
ERSA IR / PL 650 A
ERSA IR / PL 650 A / Page 10 Document 3BA00143 Rev.2
Video output:
Two cinch sockets are located on the rear of the IR 650 A. The video signal from the RPC
camera and the PL camera are available on these sockets.
This signal is transmitted to the video inputs of the FALCON Frame Grabber card in the PC
via two video cables.
USB interface, system bus:
The IR /PL 650 A is connected to a PC via a USB cable (type A-B). All control functions, and
the process parameter documentation, are available via the IRSoft software.
The control signals to the individual system modules are distributed via the system bus. PL
650 A and RPC module are connected on the rear of the IR 650 A for this.
The video signals of the two motorized zoom cameras are also transmitted internally via
these cables.
Master switch / EMERGENCY-STOP switch:
The entire IR / PL 650 A system is switched on and off via this switch, and in the event of
hazard it is all-phase disconnected from the power supply.
Safety temperature monitoring:
The upper heating element and the lower heating element of the IR 650 A are equipped
with thermal safety switches.
In the event of uncontrolled heating they automatically switch off the energy supply to the
heating elements, to prevent damage to the device or to objects in the vicinity.
The ring core transformer for the upper heating element is likewise equipped with a safety
switch.
Vacuum supply:
The IR / PL 650 A does not require any external compressed air or vacuum supply.
The IR 650 A has two integrated vacuum pumps.
One supplies the hand vacuum VacPen grip, the second supplies the vacuum nozzle of the
IR 650 A and also of the PL 650 A.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ersa Système de soudage
Manuels Système de soudage populaires d'autres marques
TAFA
TAFA 30*8B35 Manuel utilisateur
Lincoln Electric
Lincoln Electric INVERTEC V350-PRO CE Manuel utilisateur
ESAB
ESAB Buddy Arc 145 Manuel utilisateur
CIGWELD
CIGWELD 636804 Guide rapide
Red-D-Arc
Red-D-Arc DC-400 Manuel utilisateur
Hobart Welding Products
Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur
