Ergo Elite 2 Manuel utilisateur
Ergo Elite 2
User's Manual
www.ergo.co.uk
Page II
Ergo Elite 2 User Manual
Third Edition
ã1998-2000 Ergo Computing UK Ltd
Elite 2 User's Manual
Page III
Dear Customer,
Thank you for purchasing Ergo’s latest state-of-the-art Multimedia notebook
computer!
You are now in possession of one of the most powerful, feature-rich and expandable
notebooks ever made. We encourage you to read this manual and familiarize yourself
with all the capabilities that your machine has to offer. For those of you who just cannot
wait to get started, please take time to read the Safety Instructions at the very beginning
of this manual, the Overview in this chapter, the basic operations in Chapter 2, and
Configuring Your System as explained in Chapter 11. Then you can go ahead and get
started with your new Elite 2!
If you have any difficulties with your Elite 2, and you cannot find the solution within
this manual, please take advantage of your free lifetime telephone support. Our
qualified engineers are here to help you - use them !! We also have a comprehensive
website which contains all the latest drivers for all Ergo products
(http://www.ergo.co.uk)
Contact Details:-
Ergo Computing UK Ltd
Unit 7 Wheatcroft Business Park
Edwalton, Nottingham NG12 4DG
Tel: 00 44 (0) 1159 144144 Fax: 00 44 (0) 1159 144155
email: [email protected]
Yours faithfully,
Managing Director
Ergo Computing UK Ltd
Elite 2 User's Manual
Page IV
Specifications and information found in this manual are subject to change
without notice. Any changes therefore will be incorporated in future
editions. Ergo Computing assumes no responsibility for errors or
omissions in this document.
MS-DOS, Windows 95, Windows 98, Windows NT and Windows
2000 are trademarks of Microsoft Corporation.
Pentium® is a trademark of Intel Corporation.
Sound Blaster Pro is a trademark of Creative Technology Ltd.
Other trademarks are properties of their respective owners.
NOTICE
TRADEMARKS
Elite 2 User's Manual
Page V
l. Please read these safety instructions carefully.
2. Please keep this User's Manual for future reference.
3. Please disconnect this equipment from AC outlet before cleaning. DO NOT
use liquid or sprayed detergent for cleaning. Use a clean moistened cloth.
4. The wall socket used should be positioned near the equipment and should be
easily accessible.
5. Please keep this equipment free from humidity.
6. Place the equipment on a reliable surface at all times. A drop or fall can
cause severe damage.
7. The openings on the enclosure are for air ventilation and are designed to
protect the equipment from overheating. DO NOT COVER THE
VENTILATION OPENINGS.
8. Verify the voltage of the power source before connecting the unit to any
power outlet.
9. DO NOT step on or place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. WARNING! If the equipment is not used for a long period of time,
disconnect the equipment from the power source to avoid damage from
power spikes.
12. NEVER pour any liquid into any openings; a fire or electrical shock is
possible.
13. For safety reasons; other than pre-designated ports and doors, the equipment
should be opened only by qualified service personnel.
SAFETY INSTRUCTIONS
Elite 2 User's Manual
Page VI
14. If one of the following situations should arise, the equipment should be
checked by an authorized technician:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to excessive moisture.
d. The equipment does not work well or you can not get it to work
according to user's manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN TEMPERATURES BELOW
-20ºC(-4ºF) OR ABOVE 60ºC(140ºF). IT MAY CAUSE DAMAGE TO
THE EQUIPMENT.
16. To reduce the risk of electrical shock, always ensure that the modem line is
disconnected from the telephone network while installing your system or
when opening the equipment’s enclosure.
17. Never install modem/telephone wiring during a lightning storm.
18. Never install modem/telephone jacks in wet locations unless the jack is
specially designed for wet locations.
19. Never touch non-insulated modem/telephone wires or terminals unless the
modem/telephone line has been disconnected at the network interface.
20. Use caution when installing or modifying modem/telephone lines.
21. Avoid using a modem/telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from lightning.
Elite 2 User's Manual
Page VII
22. THE CD-ROM/DVD-ROM IN THIS NOTEBOOK EMPLOYS A LASER
SYSTEM.
a. To ensure proper use of this product, please read the relevant
instructions carefully and retain for future reference.
b. Should the unit ever require maintenance, contact your local dealer.
c. Use of controls, adjustments or the performance of procedures other
than those specified may result in hazardous radiation exposure.
d. To prevent direct exposure to Laser Beam, do no try to open the
enclosure.
The internal CD-ROM/DVD-ROM drive is classified as a CLASS 1 LASER
PRODUCT. These labels are located on the outside of the CD-ROM/DVD-
ROM drive:
CAUTION
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
Elite 2 User's Manual
Page VIII
The following standards are adopted throughout this manual:
•Boldface type is used to highlight important information in this
document.
•The messages which appear on the Notebook screen will be boxed
when they are referenced.
•Where extra caution is called for, the information will be boxed in a dark
frame preceded by "Note:" or "Warning:"
•Usually after performing a step-by-step instruction, you will be asked to:
Press the Esc key
Which means you should press the key located at the upper left-
hand corner of the keyboard.
Standards
Elite 2 User's Manual
Page IX
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules. These limitations are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•Consult Technical Support or a Radio/TV technician for help.
A shielded-type power cord is required in order to meet FCC emission limits and also to
prevent interference to the nearby radio and TV reception. It is essential that only the
supplied power cord be used.
Use only shielded I/O cables to connect I/O devices to this equipment. You are
cautioned that changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
FCC NOTICE
Elite 2 User's Manual
Page X
This page is left blank intentionally.
Table des matières
Autres manuels Ergo Ordinateur portable
