Ercogener EG-IoT Series Manuel utilisateur

http://www.ercogener.com Dct_427_02

User Guide

EG-IoT-xxxx

Reference : EG-IoT_1114_UG_010_UK.docx

EG-IoT_1114_UG_010_UK.docx

Page 2 / 20

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modification. Dct_427_02

Document History

Rev.

Modifications

Author

Date

Validation

Date

000

Creation of preliminary version

YST/EFO

02/08/2017

001

Evolution LoRa frame format

PBR

21/08/2017

002

Additional info. Identifier management

LoRa/Sigfox, demo telemetering/counting/hour

meter

EFO/PBR

21/08/2017

003

Details about USB

Addition example of display

LGO

01/09/2017

004

Addition TCP

EFO

11/09/2017

005

Addition UDP, adjustment LoRa configuration

EFO

27/11/2017

MSU

01/12/2017

006

Additional information

YST

07/12/2017

007

How change battery

YST

22/01/2017

008

Additional information

YST

14/02/218

MSU

14/02/2018

009

minor adjustment for LoRa configuration

EFO

09/04/2018

YST

10/04/2018

010

Adjustment and remove software detail.

Software details are now in a separate

document.

EFO

16/08/2018

MRE

23/08/2018

The main modifications in this document compared to its previous version are easily identifiable by the blue color

of the text.

EG-IoT_1114_UG_010_UK.docx

Page 3 / 20

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modification. Dct_427_02

TABLE OF CONTENTS

WARNING ......................................................................................................................................................... 4

SYMBOLS USED.............................................................................................................................................. 4

COPYRIGHT...................................................................................................................................................... 5

1PRESENTATION OF THE PRODUCTS .................................................................................................. 6

1.1 PRESENTATION OF THE PRODUCT RANGE............................................................................................. 6

2TECHNICAL CHARACTERISTICS.......................................................................................................... 7

2.1 GENERAL CHARACTERISTICS .............................................................................................................. 7

2.2 INTERNAL SENSORS ........................................................................................................................... 7

2.2.1 Accelerometer, Magnetometer ................................................................................................. 7

2.2.2 Internal temperature sensor ..................................................................................................... 7

3PACKAGING ............................................................................................................................................ 8

4FIXING THE PRODUCT........................................................................................................................... 8

4.1 FIXING WITHOUT ACCESSORIES ........................................................................................................... 8

4.2 AVAILABLE MOUNTING ACCESSORIES .................................................................................................. 8

4.3 INSTALLATION,OPTIMUM MOUNTING .................................................................................................... 9

5OPENING THE CASING .......................................................................................................................... 9

6INSTALLATION OF SIM CARD............................................................................................................. 10

7INTERNAL POWER SUPPLY CONNECTION ...................................................................................... 10

7.1 REPLACEMENT OF BATTERY.............................................................................................................. 11

8CLOSING THE CASING ........................................................................................................................ 12

9LOCAL CONFIGURATION VIA INTERNAL SERIAL LINK.................................................................. 13

10 UPDATE OF EMBEDDED SOFTWARE VIA BOOT LOADER............................................................. 14

ANNEX 1 - 8-WIRE CABLE............................................................................................................................ 15

ANNEX 2 - INTERFACE ON M8 CONNECTOR............................................................................................. 16

ANNEX 3 - DIN RAIL MOUNTING.................................................................................................................. 18

ANNEX 4 - FIXING BRACKET MOUNTING................................................................................................... 18

ANNEX 5 –MOUNTING WITH SPECIFIC CLIP ............................................................................................ 19

ANNEX 6 –RADIO COMMUNICATION......................................................................................................... 20

ANNEX 7 –APPROVALS............................................................................................................................... 20

EG-IoT_1114_UG_010_UK.docx

Page 4 / 20

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modification. Dct_427_02

Warning

This document contains the commissioning information samples EG-IoT xxxx based on an embedded

demonstration application EaseEG-IoT.

ERCOGENER cannot be held responsible for:

- Problems arising from improper use of the EG-IoT xxxx.

- Problems arising from improper configuration

- Dysfunctions arising from the absence or poor coverage of GSM, GPRS, UMTS, LTE Cat.M1, GNSS, LoRa,

Sigfox networks

- Dysfunctions if the product is used for the monitoring of physical persons where human life is at stake.

ERCOGENER reserves the right to modify the functionalities of its products "EG-IoT xxxx" without prior

notice.

- When the equipment is open, do not carry out any operations other than those provided for in this

document.

- No internal parts can be repaired by the user. The EG-IoT xxxx must be returned to the factory for repairs.

- In order to ensure electromagnetic compatibility, the lengths of the serial link cable, the power cable and the input /

output cable must not exceed a length of 3 meters.

- The EG-IoT xxxx must not be powered directly by the mains supply, a voltage adapter must be used.

In all cases, the EG-IoT must be powered by a current-limited power source.

DISPOSE OF BATTERIES AND USED BATTERIES IN ACCORDANCE WITH USUAL

INSTRUCTIONS.

In the EG-IoT range, there are 2 shades of grey :

The first EG-IoT products are delivered in a dark-grey casing.

Later products will be progressively modified with light grey casings.

Symbols used

The following symbols are used to highlight important information in the manual.

Essential information for the integration and performance of the module.

Warning indicating actions that could harm or damage the module

EG-IoT_1114_UG_010_UK.docx

Page 5 / 20

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modification. Dct_427_02

Reproduction, transfer, distribution or storage of part or all of the contents of this document, in any form whatsoever,

without the prior written permission of ERCOGENER is prohibited.

EG-IoT xxxx and EaseEG-IoT are trademarks of ERCOGENER.

The use of certain products or services described in this document may require subscription to a paid service. The

availability of certain products or services described in this document may vary depending on the configuration and

hardware.

In some countries, there may be restrictions on the use of devices. Check with the local legal authorities.

The contents of this document are provided "as is". Except as required by applicable laws, no warranty of any kind,

either express or implied, including but not limited to implied warranties of merchantability and fitness for a particular

purpose, is granted as to the accuracy, reliability or content of the document. ERCOGENER reserves the right to

revise this document or withdraw it at any time without notice.

ERCOGENER cannot be held responsible for any loss of data or income, as well as for

any special, incidental, consequential or indirect damage. See general sale conditions.

EG-IoT_1114_UG_010_UK.docx

Page 6 / 20

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modification. Dct_427_02

1 Presentation of the products

Products from the EG-IoT-xxxx family are suitable for harsh outdoor environments. They are all waterproof and

resistant to mechanical shocks.

Compact, with integrated long-range antennas and a long battery life, they are easy to implement.

The ability to have multiple communication technologies LPWAN+3G provides a product dedicated to critical

applications.

These products are intended for use in various applications such as geolocation, remote control, metering, remote

supervision…

This document presents the general characteristics and the implementation of functions.

1.1 Presentation of the product range

interface

Product

LPWAN

Cellular

GNSS

BLE

One

Output

RS485

Pwr

Power.

EG-IoT

Input

Ana

Input

Opto

Contact

Wire

ext.

40B1

LoRa



2(1)

1(1)

Primary

4281

LoRa



Primary

4A01

LoRa

2G/3G



Primary

4AA6

LoRa

2G/3G



1(1)

Co(1)

1(1)

Ext./Bat.

4AB1

LoRa

2G/3G



2(1)

1(1)

Primary

4E81

LoRa

LTE-M1



Primary

80B1

Sigfox



2(1)

1(1)

Primary

8281

Sigfox



Primary

8AA6

Sigfox

2G/3G



1(1)

Co(1)

1(1)

Ext./Bat.

8AB1

Sigfox

2G/3G



2(1)

1(1)

Primary

(1) Fonctionnality not yet implemented

available

- not used

(see annex for more details)

LPWAN

Sigfox 868MHz Class 0 14dBm

BLE

BLE V4.2

LoRa 868MHz Class A 14dBm

Power supply

Ext. External 8-30 Vdc

Cellular

3G 800/850 900/1900 2100 MHz

Primary non rechargeable Li-SOCI2 3.6V –6Ah

2G 850/900 1800/1900 MHz

Bat. Rechargeable 1 A.h 3.7Vdc

LTE-M1 800/1800 MHz

Out

Led

GNSS

GPS / GLONASS

Co open collector

EG-IoT_1114_UG_010_UK.docx

Page 7 / 20

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modification. Dct_427_02

2 Technical characteristics

2.1 General characteristics

Operating temperature

With internal primary battery

With external power supply and internal

lithium battery

-30°C to +75°C

-20°C to +60°C

Storage temperature

With internal battery

With external power supply and internal

rechargeable battery

-40 °C to +80 °C

-20°C to +35°C (+60°C max 1 month)

Recommendations : <+30°C

Dimensions

90 x 65 x 35 mm

Waterproof casing

IP67 - IP69K

(with M8 cap if unconnected)

2.2 Internal Sensors

2.2.1 Accelerometer, Magnetometer

Accelerometer / Magnetometer characteristics

Specifications

Magnetic Dynamics

± 50 gauss

Accelerometer Dynamics

±2 / ±4 / ±8 / ±16 g

The X, Y and Z axes are identical for the

accelerometer and the magnetometer.

2.2.2 Internal temperature sensor

Temperature sensor characteristics

Specifications

Measurement range

-40 °C to + 85 °C

Resolution

1 °C

EG-IoT_1114_UG_010_UK.docx

Page 8 / 20

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modification. Dct_427_02

3 Packaging

Delivered with

A product EG-IoT - xxxx

Installation instructions

Variant :

A 8-wire cable equipped

with a M8 connector (see

General Presentation)

A M8 sealing plug for

products equipped with a

M8 connector.

Unitary packaging

multiple packaging

4 fixing the product

The product must be configured before its installation.

If needed, the SIM card must be inserted before the configuration.

4.1 Fixing without accessories

With 2 screws

Self-drilling for thermoplastic

Ø 3 mm x LgMAX. : 12 mm

Minimum bending radius of the cable

Fix position RMIN. = 25,5 mm

Flexible position RMIN. = 51 mm

Others possibilities :

Collar

Double-sided adhesive

…

4.2 Available mounting accessories

Accessories

DIN Rail mounting

Fix bracket mounting

Clip

Ref. ercogener

K014

K15

Clip 410A000004

Clip + tool K19

(see annexes for more détails)

EG-IoT_1114_UG_010_UK.docx

Page 9 / 20

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modification. Dct_427_02

4.3 Installation, optimum mounting

For optimum conditions of transmission and reception

The arrow must be positioned upwards (see figure below)

Avoid any obstacle on and in front of the product.

If the M8 cable is not connected, the cap must be placed on the connector of the

product in order to ensure its waterproofness

Installation / Position

5 Opening the casing

Product opening.

Observe handling precautions for products sensitive to electrostatic discharge (ESD).

Tools : Screwdriver TORX T10.

Tape

Screwdriver or coin.

1 –Using the TORX T10 screwdriver, remove the 4

screws under the casing.

2 –Optional. Stick the adhesive tape to the bottom of the

M8 connector.

EG-IoT_1114_UG_010_UK.docx

Page 10 / 20

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modification. Dct_427_02

3 –Use the flathead screwdriver or a coin to remove the

upper part from the lower part using the notch

provided for this purpose.

4 –Rotate the upper part, taking as the axis of rotation

the base of the casing on the M8 connector side. The

duct tape will avoid from pulling on the connections.

6 Installation of SIM card

1 –After having opened the casing (see 5 Opening

the casinginsert the Micro SIM card (format

3FF, format N°2 on below picture).

2 –Push the Micro SIM card completely into its

holder.

7 Internal Power supply connection

The product is delivered with its power supply connected. It is in deep sleep mode.

The product wakes up for a configuration:

When the converter cable USB/TTL is connected to the terminal,

At each transmission of character when the product is in sleep mode.

If the power is disconnected, the product loses the date and time, the timestamp of frames

and the Keep Alive function will be corrupted until it is set to the next time

SIM card

insertion

marker

SIM card

insertion

marker

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ercogener GPS

Ercogener

Ercogener GenLoc 41e Manuel utilisateur

Ercogener

Ercogener GenLoc 54e Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur