ERA Protect 20275 Manuel utilisateur
INDOOR WIFI CAMERA
QUICK START GUIDE
SERIOUS ABOUT SECURITY
Unique Camera
ID:
Page 2
TABLE OF CONTENT
About your Indoor WiFi Camera 3
What’s in the box 4
Exploring your ERA Protect Camera 5
Getting the best from your Indoor Camera 6
ERA Protect Indoor Camera placement tips 7
Motion alert and notification tips 8
Setting up your Camera 9
LED status 10
Specifications 10
Create your account 11
Adding your Indoor Camera to your 12
ERA Protect account
Factory reset 13
Need support? 14
ERA Protect product guarantee 15
Page 3
See and hear what’s happening inside your property from anywhere, on your
smartphone or tablet. Your ERA Protect Indoor Camera alerts you when
motion is detected. Watch live or review recordings in the cloud.
SAFE & SECURE
Your camera is protected using 128 bit SSL security encryption.
Even if your camera is vandalised or stolen, your video clips are
stored in the ERA cloud. Save your clips for 30 days by upgrading
to ERA Protect Plus.
EASY TO USE
Your camera can be accessed using the ERA Protect app on your
smartphone or tablet. You can also use the app to control your
ERA Protect Alarm, Cameras, Doorbell or on its own. The settings
are intuitive and adjustable to your own requirements.
ABOUT YOUR
INDOOR WIFI CAMERA
Page 4
WHAT’S IN THE BOX
Camera
& Stand
Power Supply Fixing Kit
QUICK
START
GUIDE
Quick Start
Guide
Reset Pin Window Sticker
P
R
O
P
E
R
T
Y
P
R
O
T
E
C
T
E
D
B
Y
S
U
R
V
E
I
L
L
A
N
C
E
I
N
O
P
E
R
A
T
I
O
N
w
w
w
.
e
r
a
p
r
o
t
e
c
t
.
c
o
m
Page 5
EXPLORING YOUR CAMERA
Micro USB
power connector
Light sensor
Stand
Microphone
Lens
Speaker
Magnet
connector
for stand
Status
LED
Night vision LED’s
Page 6
GETTING THE BEST
FROM YOUR INDOOR CAMERA
Questions you may want to consider
What do I want to see in the field of view?
What kind of scenarios do I want to trigger a motion recording?
When do I want to have motion recorded?
Do I want a notification sent to me when motion recording is
triggered?
Make sure when setting up your Camera, you:
• Position the Camera securely facing what you want to see.
• Ensure the motion detection set up matches your needs.
Page 7
We recommend placing the camera no further than 10m/30ft away from
your router; closer if there are obstacles in the way such as walls, doors
or ceilings.
Outside of this range, we recommend using a WiFi signal extender
or repeater.
The ERA Protect Indoor Camera is only compatible with the 2.4 GHz
WiFi frequency.
Make sure your camera is securely attached to the magnetic stand.
•
•
•
•
ERA INDOOR CAMERA
PLACEMENT TIPS
• Ensure the Camera is properly attached to the supplied stand
before final installation and positioning.
• Compliance is only assured by using the included power supply.
Page 8
Your ERA Protect Indoor Camera uses a sophisticated motion algorithm
which detects when motion is happening, and can alert you instantly
by push notification.
To receive alerts every time motion is detected*, you may wish to consider
the following tips so that you achieve the best results and reduce the number
of false alerts:
MOTION ALERT & NOTIFICATION TIPS
Active pets (or children!) may trigger the motion recording.
Movements near busy doors or windows may set off multiple
notifications.
Depending on the location of the camera, you may trigger motion
alerts due to reflections, shadows or sunlight.
You will not be able to use night vision if your camera is positioned
to look through glass.
*In order to avoid multiple alerts for the same event, you will only receive an alert
once every 15 minutes (per Camera).
Page 9
It is important your ERA Indoor Camera Set up is configured according to
your individual requirements. Once you have completed the set up process
it is advisable to test the camera to ensure it is working.
SETTING UP YOUR CAMERA
1Camera Location
If your chosen location for the
camera is a wall. Attach the metal
plate to the wall either vertically
or horizontally where you want
to position your camera.
2Attach the stand
Attach the stand to the magnet
connector on the rear of the camera.
3Attach the power cable to the rear of the camera, and plug the
power supply into a power socket and turn on.
Page 10
Power Requirements:
Night Vision:
Viewing Angle:
Image Quality:
Connectivity:
Size (LxWxH) & Weight:
SPECIFICATIONS
5V DC Power Adapter Supplied
LED's with IR Cut switcher up to 6m
86º Horizontal / 46º Vertical
H.264 High profile, 1/3" CMOS Sensor,
Full HD (1920*1080P)
Wi-Fi 802.11 b/g/n 2.4GHz
65 x 112 x 33mm; 300g
LED STATUS
Solid LED and 4 Night Vision LED's – Booting Up.
Red Light Flashing (3 pulses) – Camera in Pairing Mode.
Continuous Red Light Flashing - Firmware update.
Red light flash – Will flash once when motion is detected,
or settings have been changed.
Table des matières
Autres manuels ERA Caméra de sécurité
