EQUILAB SMARTMARKER Manuel utilisateur
SMARTMARKER
new page
power
status
power status
Smartmarker
Sensor
Bluetooth status
color ring
marker
release
SMARTMARKER
eraser
cap
Smartmarker
Sleeve
power button
charging
case
Bluetooth
button
sensor
USB port
USB charge
port
1
Components
Record and organize written notes.
Stream, edit, enhance and share
them with friends and colleagues.
Convert your handwriting to text for
easy editing and sharing. For
download instructions, see the
following page.
Equil Note App
user guide black marker
2
quick start card
direct connect cable
*Ferrite core
sensor mounting
bracket
USB power adapter & international adapters
wireless dongle
3
Tablet
Computer
Phone
Charging
Tips
Use the wall adapter for faster charging.
You may use any micro-USB cable to
charge your Equil Smartmarker.
The amber LED indicates active
charging. The green LED indicates that
charging is complete.
❶Download and install Equil Note
iOS the App Store
Android™ Google Play™
Mac OS X® the Mac App Store
Windows myequil.com
❷Charge your marker and sensor
Fully charge Equil
Smartmarker
before use.
Charging takes
approximately
two hours.
Once charged, your
Equil Smartmarker
can be used
continuously for up
to eight hours.
USB
Equil Note platform available on
❸Turn on the sensor
The Power button is found on the side
of the sensor.
4
Power
Tips
To save battery power, the
sensor will turn off automatically
after 60 minutes of inactivity.
❹Set Bluetooth Mode
The Bluetooth button is found on the side of the
sensor. Bluetooth mode will be on by default.
When the sensor is powered up, Bluetooth
mode can be turned on and off with a short
press of the Bluetooth button. Turning
Bluetooth mode off ensures no one is capturing
what is being written on any pre-paired device.
The status of Bluetooth mode is shown via LED
lights next to the Bluetooth button.
❺Pair sensor with your device
Use the dongle for a wireless
connection without pairing
5
Tips
❶Press and hold the Bluetooth
button (1) until you hear the
beep sound.
❷Turn on Bluetooth for the
device you are pairing
(phone, tablet, computer)
and select “EquilSM-xxxxxx”
in the devices list.
❸ When pairing is complete,
the Bluetooth LED will start
to blink slowly (approx. once
every 2 seconds).
Note: When Equil Note
is open, Bluetooth LED
will stay solid.
For more detailed pairing info
for your specific device, refer
to the tutorial in Equil Note.
To pair with a new device
when a previously-paired
device is nearby, you may
need to delete/remove
“EquilSM-XXXXXX” from the
list of devices paired on the
other device.
Pairing
❻
Make sure your Bluetooth status is on.
The sensor will connect to the dongle automatically.
Connect the USB wireless dongle to your Windows
or Mac computer.
Dongle Ease of Use
The dongle is useful when
a Bluetooth device or
connection is not available.
The dongle does not
require any pairing and
will connect with the
sensor automatically.
Works only with Windows
and Mac Computers.
Depending on the size and orientation of your
whiteboard, the sensor can be centered
vertically on either side––or in the middle––of
your writing area.
❼Place sensor on your
whiteboard
6
Tips
Setup
Position the sensor where it
will be convenient to press
the new page button.
If your board area is wider
than 8 feet, place the
sensor in the center and
write notes on both sides,
up to 16 feet wide.
If you write too far from the
sensor, it will alert you to stay
within the recording area.
For your notes to be captured,
you must write at least 2 inches
away from the sensor. If you
write too close to the sensor, it
will alert you to move back into
the writing area.
draw
area
draw
area
draw
area
draw
area
draw
area
The charging case provides a
handy place to store the
Smartmarker, and keeps it
charged and ready for use.
The sensor is always portable.
Simply remove the sensor
from its magnetic hold in the
charging case and place on
other whiteboard surfaces.
To use your Smartmarker
while the sensor is docked
in the charging case, make
sure that you attach the
charging case on the left
side of your whiteboard.
The sensor will continue to
function, but will no longer
capture writing on the
left side.
Installation
Tips
7
❶Attach metal mounting
bracket to sensor.
❷Remove protective
backing.
❸Place sensor on surface,
press firmly for best
adhesion.
Place sensor on
magnetic whiteboard.
All Other Surfaces
Magnetic Whiteboards
Using the charging case on
your whiteboard
You can set up a more permanent installation by
plugging the charging case into a power outlet.
Use the provided 10 foot (3 meter) USB cable
and the USB power adapter to plug the charging
case into the nearest electrical outlet.
draw area
❽Install the dry erase marker
❷Remove the
eraser cap
❹Replace the
eraser cap
❶ Open the marker barrel
❸ Insert the
corresponding
dry erase marker
Tips
Ideal Draw Angles
For best results, the
marker should be used
close to a 90 degree angle
(perpendicular) from the
draw surface. More than a
15 degree tilt may cause
errant strokes.
8
Different color marker sleeves
can be purchased as an added
accessory to match different
color markers. Alternate colors
include: Red, blue, and green.
Marker
15°
draw
surface
❾Large eraser accessory
–
+
Eraser bracket with adhesive back.
Extra accessories can be purchased at
www.myequil.com
draw area
Note: Park eraser outside of drawing area
Tips
9
If your Smartmarker or eraser
battery is running low, the
amber LED will blink 5 times
when you turn on the sensor
to remind you to recharge
soon.
The Smartmarker and eraser
have no power buttons. They
will turn off automatically.
Battery Large Eraser Usage
Press the eraser firmly
against the wall for best
results.
Eraser Bracket
The eraser bracket allows
you to park the eraser on
any surface.
This accessory can be purchased through
authorized dealers.
The large eraser accessory operates with a
single AA battery. Using the eraser bracket, you
can mount the large eraser on any flat surface
Autres manuels pour SMARTMARKER
2
Table des matières
