Epson Equity 4 Manuel utilisateur

EPSON

User’s

Guide

This manual is printed on recycled paper and is 100% recyclable.

lMPORTANT NOTICE

DISCLAIMER OF WARRANTY

Epson America makes no representations or warranties, either express or implied, by or

with respect to anything in this manual, and shall not be liable for any implied warranties

of merchantability and fitness for a particular purpose or any indirect, special or

consequential damages. Some states do not allow the exclusion of incidental or

consequential damages, so this exclusion may not apply to you

COPYRlGHT NOTICE

system, or transmitted, in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise

without the prior written permission of Epson

America, Inc. No patent liability is assumed with respect to the use of information

contained

herein.

Nor is any liability assumed for damages resulting from the use of the

information contained herein Further, this publication and features described herein are

subject to change without notice.

TRADEMARKS

Epson

is a registered trademark of Seiko Epson Corporation.

General notice: Other product names used herein are for identification purposes only and

may

be trademarks of their respective companies.

1993 by Epson America, Inc.

Torrance, California

FCC COMPLIANCE STATEMENT

FOR AMERICAN USERS

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and an radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio and

television reception. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause interference to radio and television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the

receiver

is connected

Consult and experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this equipment will

invalidate the FCC Certification of this device and may cause interference levels that

exceed the limits established by the FCC for this equipment. It is the responsibility of the

user to obtain and use a shielded equipment interface cable with this device. If this

equipment has more than one interface connector, do not leave cables connected to unused

interfaces.

Changes or modifications not expressly approvedby the manufacturer could void the

user’s authority to operate the equipment.

FOR CANADIAN USERS

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus as set out in the radio interference regulations of the Canadian

Department of communications.

Le~tappareilnumQiquen’emetpasdebruilsr~~~triquesd~leslimi~

applicables

aux

appareils

numhiques

Classe

Bprescrites

dans

r&glement

sur le

brouillage

radio6lectrique

kdictk

par

h4inisthredes

CommunicationsduCanada

Important Safety Instructions

Read all of these instructions and save them for later reference.

Follow all warnings and instructions marked

the computer.

Unplug the computer from the wall outlet before cleaning. Use a

damp cloth for cleaning; do not use liquid or aerosol cleaners.

4. Do

not

spill liquid of any kind on the computer.

5. Do not place the computer on an unstable cart, stand, or table.

6. Slots and openings in the cabinet and the back or bottom are

provided for ventilation; do not block or cover these openings.

Do not place the computer near or over a radiator or heat

Operate the computer using the type of power source indicated

on its label.

If you plan to operate the computer in Germany, observe the

following safety precaution:

To provide adequate short-circuit protection and over-current

protection for this computer, the building

installation

must be

protected by a 16 Amp circuit breaker.

Reim

AnschluB

des Computers an die

Netzversorgung

muf3

sichergestellt

werden,

dat3

die

Gebaudeinstallation

miteinem

16A

ijberstromschutzschalter

abgesichertist.

9. Connect all equipment to properly grounded (earthed) power

outlets. If you are unable to insert the plug into an outlet,

contact

your electrician to replace your outlet. Avoid using

outlets on the same circuit as photocopiers or air control

systems that regularly switch on and off.

iii

10.

Do not allow the computer’s power cord to become damaged or

frayed.

11.

If you use an extension cord with the computer, make sure the

total of the ampere ratings of the devices plugged into the

extension cord does not exceed the ampere rating for the

extension cord. Also, make sure the total of all products

plugged into the wall outlet does not exceed 15 amperes.

12.

Do not insert objects of any kind into this product through the

cabinet slots.

13. Except as specifically explained in this User’s Guide, do not

attempt to service the computer yourself. Refer all servicing to

qualified service personnel.

14.

Unplug the computer from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

When the power cord or plug is damaged.

If liquid has entered the computer.

C. If the computer does not operate normally when the

operating instructions are followed. Adjust only those

controls that are covered by the operating instructions.

Improper adjustment of other controls may result in

damage and often requires extensive work by a qualified

technician to restore the computer to normal operation.

If the computer has been dropped or the cabinet has been

damaged.

If the computer exhibits a distinct change in performance.

Instructions Importantes de

Skurit6

Lire

compl&ement

les

instructions

qui

les

conserver

pour

references

futures.

Bien

suivre

tous

les

avertissements

les

instructions

incliques

sur

l’ordinateur.

Debrancher

l’ordinateur

toute

sortie

murale

avant

nettoyage.

Utiliser

chiffon

humide;

jamais

utiliser

nettoyeur

liquide

une

bonbonne

aerosol.

4. Ne

jamais

renverser

hquide

d’aucune

sorte

sur

l’ordinateur.

5. Ne

pas

placer

l’ordinateur

sur

chariot,

support,

une

table

instable.

Les

events

dans

meubles,

l’arriere

dessous

sont

concus

pour

l’aeration;

doit

jamais

les

bloquer.

pas

placer

l’ordinateur

p&s

dune

source

chaleur

directe.

fonctionnement

l’ordinateur

doit

s’effectuer

conformement

type

source

d’alimentation

indiquee

sur

l’etiquette.

Lorsqu’on

desire

utiliser

l’ordinateur

Allemagne,

doit

observer

les

normes

s&uritaires

qui

suivent:

Afin

d’assurer

une

protection

adequate

l’ordinateur

co&e

les

court-circuits

survoltage,

l’installation

l’kdifice

doit

comprendre

disjoncteur

amp.

doit

brancher

tout

l’&quipement

darts

une

sortie

relirk

masse.

Lorsqu’il

est

impossible

d’inserer

fiche

clans

prise,

doit

retenir

les

services

d’un

&ctricien

remplacer

prise.

jamais

utilkr

une

prise

sur

m&e

circuit

qu’un

appareil

photocopie

syst&me

contn%e

da&ration

avec

commutation

marche-arret.

10. S’assurer

que

cordon d’alimentation de l’ordinateur n’est pas

effrs.

11. Dans

cas

utilise

cordon

rallonge

avec

l’ordinateur,

doit

s’assurer

que

valeur

totale

d’ampikes

branches

dans

cordon

n’exdde

aucun

temps

les

amperes

cordon

rallonge.

quantite

totale

des

appareils

branches

darts

prise

murale

doit

jamais

exckkr

amperes.

12.

jar&s

ins&w

objet

quelque

sort-e

que

soit

darts

les

cavit&s

de cet appareil.

13. Sauf tel que

spkifie

darts

la notice d’utilisation, on

doit jamais

ten&r

d’effectuer une reparation de l’ordinateur. On doit

r&rer

le service de cet appareil aun technicien

qua&B

14.

Debrancher

l’ordinateur de la prise murale et confier le service au

personnel de service

qualit%

selon les conditions qui suivent:

A. Lorsque le cordon d’abmentation ou la prise sont

endommages.

Lorsqu’un liquide s’est

inUt&

dans l’ordinateur.

C. Lorsque

l’ordinateur

refuse

fonctionner

normalement

meme

les

instructions.

N’ajuster

que

les

commandes

qui

sont

&unGr&s

darts

les

instructions

fonctionnement.

Tout

ajustement

mad&Brat

tout

autre

contr6le

peut

provoquer

dommage

souvent

nkzssiter

des

reparations

&labor&s

par

technicien

qualifie

afin

remettre

I’appareil

enservice.

Lorsqu’on

Mtappe

l’ordinateur

que

l’on

endommage

boxer.

Lorsque

l’ordinateur

d&nor&e

changement

note

niveau

de sa performance.

Contents

Introduction

VGA Utilities

.............................

Optional Equipment

.........................

Memory

.............................

Drives

..............................

OverDrive Processor

......................

Math Coprocessor

.......................

Alternate VGA Interface

....................

How to Use This ManuaI

......................

Chapter 1

Using Your computer

Turning On the Computer

.....................

1-2

Turning Off the Computer

..................

1-5

Using Disks and Disk Drives

....................

1-5

How Disks Store Data

.....................

1-6

Types of Diskette Drives

....................

1-7

Caring for Diskettes and Diskette Drives

..........

1-10

Write-protecting Diskettes

..................

1-12

Inserting and Removing Diskettes

..............

1-14

Using a Single Diskette Drive System

............

1-16

Formatting Diskettes

.....................

1-17

Making Backup Copies

....................

1-17

Using a Hard Disk Drive

...................

1-18

Special Keys on the Keyboard

...................

1-20

Stopping a Command or Program

.................

1-21

Resetting the Computer

.......................

1-22

Using a Password

..........................

1-23

Changing or Deleting a Password

..............

1-23

vii

Changing the

Processor Speed

..................

1-24

Preparing the Hard Disk for Moving

...............

1-26

Using AUTOEXEC.BAT and Other Batch Files

.........

1-27

Chapter 2

Installing and Removing Options

How to Use This Chapter

.....................

2-2

Locating the

Internal

Components

.............

2-3

Removing the Cover

........................

2-4

Changing the Jumper Settings

...................

2-6

Setting the Jumpers

......................

2-9

Memory Modules (SIMMs)

....................

2-11

Inserting SIMMs

........................

2-13

Removing SIMMS

.......................

2-15

Installing an Option Card

.....................

2-16

Removing an Option Card

.....................

2-20

Removing the Option Card Connector Board

..........

2-21

Replacing the Option Card Connector Board

..........

2-22

Installing a New Processor Chip

.................

2-23

Increasing the Video Memory

...................

2-24

Installing the Memory Chips

.................

2-24

Using the Alternate VGA Interface

................

2-26

Using a Display Adapter Card

..................

2-28

Replacing the Cover

........................

2-29

Post-instaIIation Procedures

....................

2-30

Chapter 3

lnstalling and Removing Drives

How to Use This Chapter

.....................

3-3

Setting the Hard Disk Drive Jumpers

...............

3-4

Where to Go Next .......................

3-4

InstaIIing a Hard Disk in the VerticaI Bay

............

3-5

Removing the Mounting Frames

..............

3-6

Installing the Hard Disk

...................

3-8

Connecting the Cables

....................

3-12

Removing a Hard Disk From the Vertical Bay

..........

3-15

viii

InstaIIing a Drive in a HorizontaI Bay ...............

3-17

Attaching Mounting Frames to a Hard Disk

........

3-19

Installing the Drive.

......................

3-20

Connecting the Cables

.....................

3-24

Removing a Drive From a Horizontal Ray

............

3-29

Connecting the Hard Disk Drive Ribbon Cable to the

System Board

...........................

3-33

Post-installation Procedures

....................

3-36

Chapter 4

Running System Diagnostics

Starting the Program

........................

4-2

Deleting Tests

..........................

4-3

Adding Tests

..........................

4-4

Running Tests

............................

4-5

Resuming From an Error

...................

4-6

System Diagnostic Tests

......................

4-7

Error Messages

............................

4-8

Chapter 5

Formatting

Hard Disk

Starting the Program

........................

5-2

Formatting a New Disk

....................

5-3

Reformatting a Used Disk

..................

5-3

Selecting an Option

......................

5-3

selecting a Drive

........................

5-4

Option 1, Format

...........................

5-4

Modifying the Defective Track Table

............

5-6

Formatting the Disk

......................

5-8

Option 2, Destructive Surface Analysis

..............

5-9

Option 3,

Nondestructive Surface Analysis

...........

5-10

Exiting the Program

.........................

5-11

Autres manuels pour Equity 4

Table des matières

Autres manuels Epson Ordinateur de bureau

Epson

Epson PC AX Manuel utilisateur

Epson

Epson ActionPC 2600 Manuel d'installation et d'exploitation

Epson

Epson Equity 386/33 PLUS Manuel utilisateur

Epson

Epson EL 4S/33 Manuel d'installation et d'exploitation

Epson

Epson Equity III Manuel utilisateur

Epson

Epson ActionDesk 4000 Manuel d'installation et d'exploitation

Epson

Epson Powerspan Manuel d'installation et d'exploitation

Epson

Epson Equity 386SX PLUS Manuel d'installation et d'exploitation

Epson

Epson QX-10 Manuel utilisateur

Epson

Epson Equity 4 Manuel utilisateur

Epson

Epson ExpressStation Manuel d'installation et d'exploitation

Epson

Epson ActionTower 8000 Manuel utilisateur

Epson

Epson ActionTower 7500 Manuel utilisateur

Epson

Epson NX Manuel utilisateur

Epson

Epson EISA Tower Manuel d'installation et d'exploitation

Epson

Epson ActionDesk 4000 Manuel utilisateur

Epson

Epson Powerspan Manuel d'installation et d'exploitation

Epson

Epson EL 486UC+ Manuel utilisateur

Epson

Epson Equity 386/25 Manuel utilisateur

Epson

Epson Equity 4 Dimensions

Epson

Epson ActionTower 2000 Manuel utilisateur

Epson

Epson Endeavor 486C Dimensions

Epson

Epson Endeavor Manuel utilisateur

Epson

Epson NX Manuel d'installation et d'exploitation

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur