Company Information
© Copyright 2022. Epredia. All rights reserved.
Epredia makes every attempt to ensure that the information
contained in this supporting document is correct and clearly
stated but
does not accept responsibility for any errors or
omissions. The development of Epredia products and services
is an ongoing pr
ocess. Please ensure that any published
information you use as a reference is up to date and relates to
the condition of the product. If necessary, check with your local
Epredia representative.
This document may not, in whole or in part, be copied,
photoco
pied, reproduced, translated, or converted to any
electronic or other form without prior written consent of Epredia.
All information contained in this manual is proprietary and
confidential, and the exclusive property of Epredia and is
protected by copyright.
These instruments conform to the general safety and
performance of:
•In Vitro Diagnostics Regulation (IVDR) EU 2017/746
The following symbols and conventions may be used
throughout this document and on the instrument:
This symbol is used on the equipment, or in a
document, to indicate that instructions must be
followed for safe and correct operation.
This symbol is also used on the instrument, or in a
document, to indicate that irritants or potentially
harmful chemical
s are present. Refer to the Material
Safety Data Sheets for the products, and always use
Good Laboratory Practice.
If this symbol appears on the instrument always refer
to the operator guide.
Contact address
Shandon Diagnostics Limited, a subsidiary of Epredia
Tudor Road, Manor Park, Runcorn
Cheshire, WA7 1TA, UK
Tel: +44 (0) 1928 534000
Fax: +44 (0) 1928 534001
Web: www. epredia.com
This symbol is utilised
on the instrument, or in a
document, to indicate that there are potential
biological risks associated with the instrument and /
or with instrument use. Always use Good Laboratory
Practice.
USA Distributor Cutting hazard, sharp edges, watch your fingers.
Richard-Allan Scientific LLC, a subsidiary of Epredia
4481 Campus Drive
Kalamazoo, MI 49008, USA
Tel: 1-800-522-7270
Fax: +1 269-372-2674
Web: www. epredia.com
Separate taking back of electrical and
instruments in the countries of the European Union:
This is to be applied in the countries of the European
Union and other European countries with a separate
collecting system within the waste management. This
product, being an electro and/or el
ectronic
instrument, must be treated separately within the
waste management process (WEEE).
A warning is given in the documentation if there is a
potential risk of injury, equipment failure or damage to
the equipment or samples.
Notes give
additional information about a job or
instruction, but do not form part of the instruction.
Manufacturer
This symbol is used on the instrument, or in the
document, to indicate that instructions for use must
be consulted
Serial number
It is stated on the product label sticker.
It is built up as follows: SYYMMXXXXEP
S=Production site, Y=year of production, M=Month of
production, X= Counter, EP=Epredia
So the serial number states the production date of the
device.
