EP Solar LS0512R Manuel utilisateur
LS0512R
—— Solar Light Controller
Please read this manual carefully before using the product！
EPSOLAR
INSTRUCTION
MANUAL
LS0512R
—— Solar Light Controller
Nominal system voltage 12VDC
Maximum PV input voltage 35V
Nominal charge / discharge current 5A
LandStar
Contents
1 Important Safety Information..................................1
2 General Information..................................................3
2.1 Product Overview........................................3
2.2 Product Features..........................................5
3 Installation Instructions ............................................7
3.1 Mounting.......................................................7
3.2 Wiring..........................................................10
4 Operation...................................................................13
4.1 Battery Charging Information.................13
4.2 LED Indicators...........................................16
4.3 Setting Operation.......................................18
5 Protections, Troubleshooting and Maintenance.22
5.1 Protection....................................................22
5.2 Troubleshooting.........................................23
5.3 Maintenance...............................................25
6 Warranty....................................................................26
7 Technical Specifications.........................................28
1
1 Important Safety Information
Save These Instructions
This manual contains important safety, installation and operating
instructions.
The following symbols are used throughout this manual to indicate
potentially dangerous conditions or mark important safety
instructions，please take care when meeting these symbols.
WARNING: Indicates a potentially dangerous
condition. Use extreme caution when
performing this task.
CAUTION: Indicates a critical procedure for
safe and proper operation of the controller.
NOTE: Indicates a procedure or function that
is important for the safe and proper operation
of the controller.
2
General Safety Information
Read all of the instructions and cautions in the manual before
beginning installation.
There are no user serviceable parts inside the controller. Do not
disassemble or attempt to repair it.
Install external fuses/breakers as required.
Disconnect the solar module and fuse/breakers near to battery before
installing or adjusting the controller.
Do not allow water to enter the controller.
Confirm that power connections are tightened to avoid excessive
heating from loose connection.
3
2 General Information
2.1 Product Overview
Thank you for selecting LandStar series solar light controller that
adopts the most advanced digital technique and operates fully
automatically. The Pulse Width Modulation (PWM) battery charging
can greatly increase the lifetime of battery. It has various unique
functions and quite easy to use, such as:
High efficient Series PWM charging, increase the battery lifetime
and improve the solar system performance.
Use MOSFET as electronic switch, without any mechanical switch
Widely used, automatically recognize day/night.
Only one key solve all setting simply
Intelligent timer function with 1-12 hours option
Adopt temperature compensation, correct the charging and
discharging parameters automatically and improve the battery
lifetime.
Electronic protection: over charging, over discharging, overload, and
short circuit.
Reverse protection for battery.
4
The controller is for off-grid solar system, especially in solar light
system, and protects the battery from being over charged by the solar
module and over discharged by the loads. The charging process has
been optimized for long battery life and improved system performance.
The comprehensive self-diagnostics and electronic protection
functions can prevent damage fro
m i
nstallation mistakes or system
faults.
Though the controller is easy to operate and use, please take your time
to read this manual and become familiar with it. This will help you
make full use of all the functions and improve your solar PV system.
5
2.2 Product Features
Figure 2-1 LandStar characteristics
1 –Charging status LED indicator
An LED indicator that shows charging status and also indicates when
battery voltage is higher than over voltage disconnec
t v
oltage.
2 –Battery status LED indicator
An LED indicator that shows battery status.
3 –Load status LED indicators
Four LED indicators that show load work mode and status.
1
1
2
1
1
1
3
4
1
1
1
1
5
6
7
6
4 –Setting button
Set load work mode (in manual mode used for load ON/OFF).
5 –Solar Module Terminals
Connect solar modules.
6 –Battery Terminals
Connect batteries.
7 –Load Terminals
Connect loads.
Table des matières
Autres manuels EP Solar Contrôleurs
EP Solar
EP Solar LS1024RD Manuel utilisateur
EP Solar
EP Solar LS2024B Manuel utilisateur
EP Solar
EP Solar Tracer-1206RN Manuel utilisateur
EP Solar
EP Solar LS1024 Manuel utilisateur
EP Solar
EP Solar eTracer ET4415BND Manuel utilisateur
EP Solar
EP Solar Tracer-4210RN Manuel utilisateur
EP Solar
EP Solar SS1024R Manuel utilisateur
EP Solar
EP Solar LandStar LS-EU Series Manuel utilisateur
EP Solar
EP Solar ET2415N Manuel utilisateur
EP Solar
EP Solar EPHC10-EC series Manuel utilisateur
EP Solar
EP Solar eTracer Series Manuel utilisateur
EP Solar
EP Solar EPIP20-LT Series Manuel utilisateur
EP Solar
EP Solar EPHC Series Manuel utilisateur
EP Solar
EP Solar EPIPDB-COM series Manuel utilisateur
EP Solar
EP Solar ViewStar MT-100 Manuel utilisateur
EP Solar
EP Solar Tracer1215BN Manuel utilisateur
EP Solar
EP Solar LS1024RPD Manuel utilisateur
EP Solar
EP Solar LandStar LS0524R Manuel utilisateur
EP Solar
EP Solar ViewStar Series Manuel utilisateur
EP Solar
EP Solar Tracer-3215RN Manuel utilisateur
