--- The objects may cause a fire ,such as c igarette ash that not put out, burning
cigarette butts, or a match.
--- Water or other liquid, especially detergent, kerosene, gasoline, paint, alcohol,
perfume,carpet cleaning, floor cleaning solution. Internal moisture
or water may cause short circuit machine.
--- The laser printer, copier toner, toner. These objects may cause fire or explosion.
>>> When use the cleaner,please don’t make it near the Hot source such as oven
or fireplace,since this may result in Deformation and aging .
.>>> Do not use machine in a potentially dangerous environment. For example, gas station,
oil depot, inflammable and explosive chemical plant.
>>> Don't use machine in outdoor. As,its will casuse the cleaner damage because of the
rain or mud, dust get into the internal space.
>>> Don't try to repair or change its performance by yourself.
>>> Don't fall, throw or extrusion the cleaner.
>>> Don't get body wet, otherwise a short-circuit that make a damage will occur.
>>> A daily maintenance is necessary.Please placing it in a clean place.
>>> Don't expose the cleaner to extremely high or low temperature environment.
It's not suitable for long-term in lower than 0 ℃ or higher than 40 ℃ environment
to use and preservation.
>>> Don't put it in liquid.
>>> Don't put it in lighted cigarettes or near open flame.
2. Attention before use:
2.1 Attention before use
>>> Please pay attention to its working space when the first time to use this cleaner,
To avoid it stop working ,please remove its barrier .
>>> For the foreseeable problems that may occur in the cleaning, should be ruled out as
soon as possible. Such as:
--- will easily upset aside the objects in a safe place.
--- whiskers on the edge of the carpet to turn over to a safe place.
--- vertical to the ground of the tablecloth, the curtain should try to make it not to
touch the ground.
--- objects to cut off the power supply with open flame.
---the power cord of the winding on the ground and the mobile obstacles.
Before cleaning,please make sure whether the brush,side brush has been
installed inside the product successfully or not .
>>>Ensure the dust container is empty, and installed in the suitable place.
>>>Before cleaning, need to check if the prosecutor sensors has been wiped clean.
>>>If you only need to clean a single room, please leave this room 's door close.
Attention:
If their is a reflective ground whose height of the steps drop more than 8
centimeters(e.g., glass), the cleaner have the potential to fall down the steps.
we are suggest that place with a layer of no reflection characteristics of cloth
or carpet in low order.and If your home is a complex Structure or with stairs,
To avoid accident occur,please pay attention to added a protective bar on
the edge of the stairs.
!
