Enwork Grid XTB Manuel utilisateur
Grid XTB
with ULL bases
(Shipped through March, 2015)
Installation Instructions
Rev 0715
1
8 - PACK
4 - PACK
2 - PACK
6 - PACK
GRID XTB
Installation
2
USLEG19H
POWER INFEED
LEG
2-PACK QTY: 1
4-PACK QTY: 1
6-PACK QTY: 1
8-PACK QTY: 1
UMCP48 FOR 60” GRID
UMCP60 FOR 72” GRID
2-PACK QTY: 2
4-PACK QTY: 4
6-PACK QTY: 6
8-PACK QTY: 8
STEP 1:
TOOLS NEEDED & PARTS
ULF.WTC
2-PACK QTY: 2
4-PACK QTY: 4
6-PACK QTY: 6
8-PACK QTY: 8
ULF.TCS
2-PACK QTY: 4
4-PACK QTY: 8
6-PACK QTY: 12
8-PACK QTY: 16
ULF.WNMPLT
2-PACK QTY: 4
4-PACK QTY: 8
6-PACK QTY: 12
8-PACK QTY: 16
ULF.GMTBRKT
or
ULF.GMTBTRKT29
(ULRISER2, ULRISER3)
2-PACK QTY: 2
4-PACK QTY: 4
6-PACK QTY: 6
8-PACK QTY: 8
ULF.STRETCHER
(REF. UCONN1, UCONN2,
UCONN3, UCONN4)
2-PACK QTY: 0
4-PACK QTY: 2
6-PACK QTY: 4
8-PACK QTY: 6
SOCKET WRENCH WITH
½” & 7/16” SOCKET
TORX
SCREWDRIVER
BITS
PHILLIPS
SCREWDRIVER
TAPE
MEASURE
PENCIL
1/2” & 7/16”
5MM ALLEN
WRENCH
DRILL / DRIVER
RISER
3
ULCM
2-PACK QTY: 2
4-PACK QTY: 4
6-PACK QTY: 6
8-PACK QTY: 8
#8-32 x ¼ TORX
PAN HEAD
2-PACK QTY: 12
4-PACK QTY: 24
6-PACK QTY: 36
8-PACK QTY: 48
#10-24 x 2”
PHILLIPS PAN
HEAD, UZBOLTU
2-PACK QTY: 6
4-PACK QTY: 10
6-PACK QTY: 14
8-PACK QTY: 18
5/16-18 FLANGE
HEX NUT
2-PACK QTY: 8
4-PACK QTY: 24
6-PACK QTY: 40
8-PACK QTY: 56
1/4-20 x 5/8”
PHILLIPS PAN HEAD
2-PACK QTY: 2
4-PACK QTY: 4
6-PACK QTY: 6
8-PACK QTY: 8
1/4-20 HEX NUT
2-PACK QTY: 2
4-PACK QTY: 4
6-PACK QTY: 6
8-PACK QTY: 8
#10-24 NUT,
UZNUTA
2-PACK QTY: 14
4-PACK QTY: 26
6-PACK QTY: 38
8-PACK QTY: 50
#10-24 x 3/8”
PHILLIPS PAN HEAD,
UZSCREW W
2-PACK QTY: 8
4-PACK QTY: 16
6-PACK QTY: 24
8-PACK QTY: 32
WOOD SCREW
SCREW1
2-PACK QTY: 12
4-PACK QTY: 24
6-PACK QTY: 36
8-PACK QTY: 48
STEP 2
HARDWARE
IDENTIFICATION
5/16-18 x 1”
FLANGE HEX BOLT
2-PACK QTY: 0
4-PACK QTY: 8
6-PACK QTY: 16
8-PACK QTY: 24
4
STEP 3
ASSEMBLE ADJUSTABLE TABLE
SEE END OF DOCUMENT FOR “CRANK” STYLE ASSEMBLIES
FOR 60” LONG GRID TABLES
FOR 72” LONG GRID TABLES
5
STEP 4
PRE-ASSEMBLE
TIGHTEN CONNECTION
NOTE ORIENTATION OF
ULF.GMTBRKT OR
ULF.GMTBRKT29
ASSEMBLE ALL ULF.GMTBRKT’s
OR ULF.GMTBRKT29 (RISER)
TO ULF.WTC’s
BEFORE MOVING FORWARD
OR ULF.GMTBRKT29
IF ULRISER2 OR ULRISER3
PACKAGE WAS PURCHASED
DO NOT USE ULF.GMTBRKT
6
5
5.1
5.2
HOLD FIRMLY ON
BOTH SIDES OF
COLUMN AS YOU
BEND TAB OVER
5.3
BEND
SLOTTED TAB
OVER
STEP 5
ASSEMBLING TABLE
5.4 INSERT FASTENERS
7
5.7 END RUN
ATTACH OTHER TABLE BASE TO ULF.WTC, TIGHTEN NUTS
5.5
STEP 5
CONT.
5.6
5.6
ALL ULF.WTC SHOULD BE SET TO .32
OR 5/16” FROM THE TOP OF PLASTIC
LEG INSERT.
TIGHTEN NUTS.
DO NOT OVER TIGHTEN NUTS. THIS
CAN CAUSE LEG COLUMN
DEFORMATION AND INOPERATION OF
TABLE.
8
STEP 5
CONT.
TERMINOLOGY
2 PACK
4 PACK
6 PACK
2 PACK
8 PACK
9
5.8 END RUN CONFIGURATION
5.8
FOR GRID XT 4 –6 –8 PACKS THIS AN END OF RUN CONFIGURATION
FOLLOW STEPS 5.1 THRU 5.3 FOR DETAILED INSTRUCTIONS.
NOTE THAT BOTH ULF.WTC CROSS BARS FACE THE SAME DIRECTION
STEP 5
CONT.
5.9 MID RUN CONFIGURATION
5.9
FOR GRID XT 4 –6 –8 PACKS THIS A MID RUN CONFIGURATION
NOTE THAT BOTH ULF.WTC CROSS BARS FACE OUTWARD
NOTE
GRID XT 2 PACK ULF.WTC
BOTH FACE INWARD
Autres manuels pour Grid XTB
1
Table des matières
Autres manuels Enwork Matériel de bureau
Manuels Matériel de bureau populaires d'autres marques
silen
silen Space 2 Manuel utilisateur
Middle Atlantic Products
Middle Atlantic Products LD Series Manuel utilisateur
SHFL
SHFL DECK MATE BLACKJACK Manuel utilisateur
DROMEAS
DROMEAS LINE Manuel utilisateur
Siemens
Siemens HIPATH 2000 Manuel utilisateur
VITRA
VITRA Stefan Hürlemann Dancing Wall Manuel utilisateur
