Envea LEAK ALERT 73 Manuel utilisateur

LEAK ALERT 73

USER MANUAL

LEAK ALERT 73

Filter Leak Monitor

USER MANUAL

Publication Part No. PC-000834-MA

Publication Part No. 492032

Issue 5

December 2021

Original language: English

document may be stored in a retrieval system,

transmitted, copied, or reproduced in any way, including,

but not limited to photocopy, photograph, magnetic or

other records without the prior agreement and permission

in writing of ENVEA UK Ltd.

Disclaimer

ENVEA reserves the right to revise and update this

documentation from time to time without obligation to

provide notification of such revision or change. Revised

documentation may be obtainable from ENVEA.

ENVEA reserves the right, without notice, to make changes

in equipment design or performance as progress in

engineering, manufacturing, or technology may warrant.

Trademarks

All product trademarks and registered trademarks are the

property of ENVEA UK Ltd.

All other product trademarks and registered trademarks

are the property of their respective companies.

envea™is a trademark of the ENVEA Group.

Feedback

ENVEA encourages customer feedback and welcomes

any comments or suggestions relating to the product or its

documentation.

Published by:

Technical Publications

ENVEA UK Ltd

ENVEA House

Rose & Crown Road

Swavesey,

CB24 4RB, United Kingdom

Email: technicalpublications.GB@envea.global

LEAK ALERT 73 
ENVEA UK Ltd (PC-000834-MA Issue 5, December 2021)December 2021 v
Table of Contents 
Table of Contents ............................................................................................... v 
List of Figures ...................................................................................................vii 
1INTRODUCTION ____________________________________________ 1 
1 Purpose of this Manual ............................................................................... 1 
2 Product Safety .......................................................................................... 1 
2.1 Danger from Process ......................................................................... 1 
3 Safety Procedures 󱛻󱛼󱛽................................................................................. 2 
4 Intended Use ............................................................................................ 3 
4.1 Limits of Use .................................................................................... 3 
5 Additional Information................................................................................ 3 
5.1 Related Documentation ..................................................................... 3 
5.2 Product Parts and Options.................................................................. 3 
6 Certification .............................................................................................. 4 
7 Conformance and Related Standards............................................................ 4 
2PRODUCT DESCRIPTION _____________________________________ 5 
1 Overview.................................................................................................. 5 
2 Technical Specification ............................................................................... 5 
2.1 Sensor Options................................................................................. 6 
2.2 Cabling............................................................................................ 6 
2.3 PC Software Suite (PC-ME DUST TOOLS) ............................................. 6 
3SENSOR INSTALLATION _____________________________________ 7 
1 Introduction.............................................................................................. 7 
2 Unpacking and Storage .............................................................................. 7 
3 Prerequisites and Guidelines ....................................................................... 7 
3.1 Location Requirements ...................................................................... 7 
3.2 Power Supply to the Sensor ............................................................... 7 
3.3 Cable Routing Guidelines ................................................................... 8 
3.4 Grounding the Sensor ....................................................................... 8 
4 Installing and Connecting the Sensor ........................................................... 8 
4.1 Safety Information............................................................................ 8 
4.2 Fitting the Sensor to the Stack ........................................................... 9 
4.3 Sensor Connections ........................................................................ 10 
5 Connecting the Power Supply.................................................................... 11 
5.1 Connecting the Cables..................................................................... 11 
5.2 Wiring the Mains Power Supply......................................................... 11 
5.3 Wiring the 24V DC Supply................................................................ 12 
4USER CONTROLS AND MENU SELECTION________________________ 13 
1 Overview of Internal Controls.................................................................... 13 
2 Navigation and Basic Functionality ............................................................. 14 
2.1 Accessing Menus and Menu Options .................................................. 14 
2.2 Changing a Setting ......................................................................... 14 
5INSTRUMENT SETTINGS: STANDARD MENU _____________________ 15 
1 Standard Menus –Scaling Methods............................................................ 15 
1.1 Scaling Method 1 –% of 4-20mA...................................................... 15 
1.2 Scaling Method 2 –Scaling Factor (Option) ........................................ 16 
2 Entering or Changing the Password [PASS]................................................. 17 
3 Sensitivity [SENS] ................................................................................... 17 
4 Display Smoothing [DISP] ........................................................................ 17 

LEAK ALERT 73 
vi (PC-000834-MA Issue 5, December 2021) ENVEA UK Ltd 
4.1 Changing the Display Smoothing Filter .............................................. 17 
5 Scaling Methods ...................................................................................... 18 
5.1 Scaling Method 1 –Scaling to % of 4-20 mA Output [SCAL] ................. 18 
5.2 Scaling Method 2 –Setting a Scaling Factor [SF] ................................ 18 
6 4-20mA Span [4-20mA] (Scaling Method 2 only)......................................... 19 
6.1 Adjusting the 4-20mA Settings ......................................................... 19 
6INSTRUMENT SETTINGS: ENGINEERING MENU [ENG] _____________ 20 
1 Advanced Functions ................................................................................. 21 
1.1 Switching to the Engineering Setup................................................... 21 
2 4-20mA Filter [4_20 FLTR] ....................................................................... 21 
2.1 Changing the 4-20mA Filter ............................................................. 21 
3 Emission Alarm Settings [ALA1, ALA2] ....................................................... 22 
3.1 Set Points [SP1, SP2] ...................................................................... 22 
3.2 Averaging Filter .............................................................................. 22 
3.3 Alarm Delay [DEL1, DEL2] ............................................................... 22 
3.4 Change the Alarm Settings –Relay 1 [ALA1]...................................... 23 
3.5 Change the Alarm Settings –Relay 2 [ALA2]...................................... 23 
4 Plant Stop Function [PL.ST] ...................................................................... 23 
4.1 Enable the Plant Stop Option............................................................ 24 
4.2 Summary of Plant Stop Behaviour..................................................... 24 
5 Comms Settings ...................................................................................... 24 
5.1 RS-485 Settings [R485] .................................................................. 24 
5.2 Changing the RS-485 Settings.......................................................... 24 
5.3 RS-232 Settings [RS232]................................................................. 25 
6 Engineering Settings [ENG] ...................................................................... 25 
6.1 Trimming the 4-20mA Outputs [420Z, 420F] ..................................... 25 
6.2 Test Functions [T.REL, T.DIG, T.LED] ................................................ 26 
7 Modbus Diagnostics [MOD.R, MOD.E]......................................................... 26 
7.1 Reading Modbus Register Values [MOD.R] ......................................... 26 
7.2 Editing Modbus Register Values [MOD.E] ........................................... 26 
7QUALITY ASSURANCE AND SELF-TESTS ________________________ 27 
1 Sensor Tests (Options)............................................................................. 27 
1.1 Sensor Checks –Pass Levels ............................................................ 27 
1.2 Frequency of Sensor Checks............................................................. 27 
1.3 Running Self-tests [RUN.T] .............................................................. 28 
1.4 Viewing Self-Test Results................................................................. 28 
1.5 Self-Test LED ................................................................................. 28 
8MAINTENANCE____________________________________________ 29 
1 Safety Information .................................................................................. 29 
2 Inspecting and Cleaning the Sensor ........................................................... 29 
3 Changing the Fuse (Mains-powered Sensors only) ....................................... 31 
APPENDIX A _________________________________________________ 32 
A.1 Resetting the Sensor [RSET]..................................................................... 32 
GENERAL COMPLIANCE _________________________________________ 33 
Waste of Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU) . 33 
RoHS Compliance Statement .................................................................... 33 
List of Materials....................................................................................... 33 
INDEX ______________________________________________________ 34 
ENVEA SERVICE AND SUPPORT CENTRES ___________________________ 36 

LEAK ALERT 73 
ENVEA UK Ltd (PC-000834-MA Issue 5, December 2021)December 2021 vii 
List of Figures 
Fig. 1: Fitting the sensor to the stack.................................................................... 9 
Fig. 2: Sensor PCB connections. ......................................................................... 10 
Fig. 3: Sensor wiring label –AC versions (inside enclosure lid)............................... 11 
Fig. 4: Power supply label (mains)...................................................................... 12 
Fig. 5: Sensor wiring label –24V versions (inside enclosure lid). ............................ 12 
Fig. 6: Internal sensor controls. ......................................................................... 13 
Fig. 7: Standard menu –Scaling method 1 (% of 4-20mA)................................... 15 
Fig. 8: Standard menu –Scaling method 2 (SF)................................................... 16 
Fig. 9: Engineering menu [ENG] (based on scaling method 1)................................ 20 

LEAK ALERT 73

viii (PC-000834-MA Issue 5, December 2021) ENVEA UK Ltd

[This page is left blank intentionally.]

LEAK ALERT 73 1 Introduction

ENVEA UK Ltd (PC-000834-MA Issue 5, December 2021) 1

1Introduction

1.1 Purpose of this Manual

This manual contains all information necessary for the correct installation, setup,

operation, and instrument maintenance. The procedures given in this manual

must be carried out only by suitably trained and qualified personnel.

1.2 Product Safety

The following symbols are used throughout this manual to indicate procedures

that, if not followed correctly, may result in personal injury or damage to

equipment.

WARNING

Alerts the user to a procedure or practice that can result in personal injury

or injury of others if not followed correctly.

CAUTION

Alerts the user to a procedure or practice that can result in damage to the

system or ancillary equipment if not followed correctly.

NOTE

Notes are used to highlight important information that may assist the

reader in carrying out a procedure or understand the text.

In addition, the following symbols are used on the product:

WARNING

Electric shock.

Protective Earth

1.2.1 Danger from Process

The sensor may be installed in ducting that contains process particulate (and other

flue gas constituents) hazardous to health. This may take one or more of the

following forms:

Particulate which is inflammable or explosive

Particulate which is toxic or in some other way hazardous to health

Particulate contained within high-temperature gas.

Take Precautionary Measures

Unless the process conditions are known to be entirely safe, suitable precautions

such as the use of breathing apparatus or duct purging/detoxifying must be

employed before any entry is made into the duct for installation or maintenance

purposes. If in doubt, consult your local Safety Officer and/or local safety

procedures.

1 Introduction LEAK ALERT 73

2(PC-000834-MA Issue 5, December 2021) ENVEA UK Ltd

1.3 Safety Procedures 󱛻󱛼󱛽

Always observe the following safety precautions. Personnel installing, operating,

or maintaining the equipment are responsible for their personal safety and for the

correct handling and use of the equipment in accordance with the safety

procedures detailed in this manual.

Follow all warnings and instructions marked on the product and in this manual.

Warning labels are situated on the system, indicating a hazard at or near the

location of the warning label. These safety instructions must be followed to avoid

possible personal injury, injury to others, and damage to the product.

If the equipment is used in a manner not specified in this manual, the protection

provided by the equipment may be impaired.

Retain these instructions in a safe and known place for future use.

WARNING

Risk of personal injury or injury to others. All personnel must be fully

trained and adhere to local and, where applicable, site-specific health and

safety laws and guidelines.

It is the responsibility of the local organisations to enforce safe working

practices at all times.

WARNING

Electric shock.

Only connect to an earthed supply. This unit is a Class 1 construction and

must be connected to a protective earth connection (GND).

WARNING

This product must be connected to a power supply of the same voltage (V)

and frequency (Hz) as indicated on the product rating plate and provided

in the Technical Specification section of this manual.

A supply cable with an adequate rating must be used. Temperature de-

rating must be considered.

WARNING

Electric shock.

For mains powered units –ensure that mains isolation devices are easily

accessible (within a 2m/6½ ft. radius) to allow the sensor and purge blower

to be switched OFF when at the units.

WARNING

Hazardous voltages.

For mains powered units –switch off and isolate the unit power supply

before opening the sensor front cover.

CAUTION

Position the unit to avoid excessive heat, vibration, humidity, and dust.

Table des matières

Autres manuels envea Moniteur

envea

envea SM-4 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

envea LEAK ALERT 73 Manuel utilisateur

Manuels Moniteur populaires d'autres marques