MANUALE / USER MANUAL
EN1650 DomoVoice Controller
V1.4 M.C.
13/10/2020
7Inserire le seguenti informazioni:
- nome della casa
- osizione geografica (o zionale)
- selezionare le stanze redefinite
remendo il cerchio arancione allineato
al nome della stanza
- è ossibile aggiungere stanze con
nome ersonalizzato remendo
“Aggiungi altre stanze” sulla arte bassa
dello schermo
- successivamente remere “Fatto” in
alto a destra
Add the following informations:
- name of the house
- geographic location (not mandatory)
- select the predefined rooms by pressing the
orange circle aligned to the room name
- it is possible to add custom rooms typing on
“Add another room” at the bottom of the screen
- finally press “Done” on the top / right
Installazione Installation
7Eseguire le connessioni come da agg. 1 e 2 e determinare l'alimentatore.
Alimentazione:
- com resa tra 12Vdc e 48Vdc
- regolata alla stessa tensione alla quale devono essere alimentate le schede a
LED connesse in uscita
Make the connections and choose the proper power supply as pages 1 and 2.
Power supply:
- from 12Vdc to 48Vdc
- adjusted at the same voltage of the LED boards connected to the output
8Alimentare la scheda.
Successivamente le schede LED collegate in uscita lam eggeranno
e si accenderanno i LED di segnalazione sulla scheda secondo la tabella
sottostante
Power the LED module.
Subsequently the LED boards connected to the output will flash and the LEDs on the
controller DomoVoice will light up according to the below table.
Rosso lam eggiante
rima configurazione
Verde lam eggiante
ricerca reti /
in connessione
Blu fisso
Wi-Fi connesso
e funzionante
Red blinking
first setup
Green blinking
network research /
in connection
Bl e fixed
Wi-Fi network connected
and working
10 Dal dis ositivo in cui è installata l'A , connettersi alla rete Wi-Fi a cui si desidera
collegare DomoVoice
From the device where the App is installed connect to the Wi-Fi network to which
you want to connect DomoVoice
11 Nell'a “Tuya Smart” remere “+” in alto a destra From the “Tuya smart” App press “+” on top / right