enphase HCS-40 Manuel utilisateur
• • • • • • •
HCS EVSE
User Manual
HCS EVSE User Manual
2
To view latest version of the product warranty, please visit
https://enphase.com/warranty/us
To view the latest version of this manual, please visit
https://enphase.com/installers/resources/documentation/ev-chargers
© 2023 Enphase Energy. All rights reserved. Enphase, the e and CC logos, IQ, and
certain other marks listed at https://enphase.com/trademark-usage-guidelines are trade-
marks of Enphase Energy, Inc. in the US and other countries. Data subject to change.
Rev02/04-18-2023.
PLEASE NOTE
This user manual includes the latest information at the time of
printing. Enphase Energy, Inc. reserves the right to make changes
this product by other than an authorized service facility may void the
product warranty.
Contact a Customer Service Representative with any questions about
the use of this product. 877-797-4743
WARNING: This product can expose you
to chemicals, including Carbon Black, which
is known to the State of California to cause
cancer. For more information go to:
www.P65Warnings.ca.gov
HCS EVSE User Manual
3
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS...............................................5
Instructions Pertaining to a Risk of Fire or Electric Shock 6
Additional Safety Instructions 8
FCC INFORMATION.................................................................................9
OPERATION..............................................................................................10
Front Panel 11
CHARGE CABLE WRAP GUIDELINES ..............................................12
INSTALLATION - SERVICE CONNECTIONS....................................13
WIRING INSTRUCTIONS (Hardwired)................................................18
RECEPTACLE INSTRUCTIONS (Plug-In EVSE)...............................19
RECEPTACLE INSTRUCTIONS ( 240V PlugType EVSE) 20
GROUNDING INSTRUCTIONS.............................................................21
Hardwired EVSE Grounding 21
Plug-In EVSE Grounding 21
MOUNTING PROCEDURES ..................................................................22
EVSE Mounting for Hollow-Wall Construction 23
EVSE Mounting for Solid-Wall Construction 24
MOUNTING THE
CONNECTOR HOLSTER ...................25
USING THE PADLOCK (if applicable) ..................................................27
MOVING & STORAGE INSTRUCTIONS............................................28
OPTIONAL FEATURES FOR HCS........................................................29
MAINTENANCE ......................................................................................30
CUSTOMER SUPPORT...........................................................................31
SPECIFICATIONS....................................................................................32
HCS EVSE User Manual
4
ILLUSTRATIONS
Figures
1. Front Panel ....................................................................................................11
2. Drape the Charge Cable Loosely Around the HCS Enclosure......................12
3. 220/240V Single Phase .................................................................................15
4. 208V 3-Phase, Wye-Connected.....................................................................16
5. 240V 3-Phase, Delta-Connected, with Center-Tap on One Leg....................16
6. Wiring the EVSE in a Junction Box..............................................................18
7. Preferred Orientation of the NEMA Receptacles Below the Plug-in HCS ...19
8. Mounting the EVSE to a Hollow-Wall..........................................................23
9. Mounting the EVSE to a Solid-Wall .............................................................24
10. Mounting the SAE J1772 Connector Holster Using the Exterior
Wood Screws and Washers............................................................................26
11. Locking the SAE J1772 Connector with Padlock Included..........................27
12. Charge Connector Secured with Padlock which Cannot be Removed
from Vehicle without Key .............................................................................27
13. Padlock Used in Combination with Connector Holster After Charging .......27
14. Enclosure Dimensions...................................................................................33
Tables
1. Front Panel LED Information........................................................................11
2. Service Connections for HCS by Model.......................................................13
5
HCS EVSE User Manual
IMPORTANT SAFETY INSTRUCTIONS
Carefully read these instructions and the charging instructions in
your vehicle owner’s handbook before charging your electric vehicle.
The following symbols may be found in this manual or on labels
NOTE:
This means pay particular attention. Notes contain
helpful suggestions.
CAUTION: This symbol means be careful. There is
potential to do something that may result in damage to the
equipment.
WARNING: This symbol means danger. You are in a
situation that could cause bodily injury. Before you work
on any electrical equipment, be aware of the hazards
involved with electrical circuitry and standard practices for
preventing accidents.
HCS EVSE User Manual
6
Instructions Pertaining to a Risk of Fire or Electric Shock
When using the HCS, basic electrical safety precautions should be
followed:
• Use this EVSE to charge electric vehicles equipped with an
SAE J1772 charge port only. Consult the vehicle’s owner
manual to determine if the vehicle is equipped with the
correct charge port.
• Make certain the EVSE SAE J1772 charge cable is
positioned so it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
• This product contains no user serviceable parts. Consult
the Customer Support section in this manual for service
information. Do not attempt to repair or service the EVSE
yourself.
• Do not operate your EVSE if it or the SAE J1772 charge
cable is physically open, cracked, frayed, or otherwise
visibly damaged. Contact a Service Representative for
service immediately. Consult the Customer Support
section in this manual for information on the Service
Representative in your area.
• Not for use in commercial garages where a
portion thereof) used for the repair of internal combustion
SAE J1772 charge cable.
• Do not allow children to operate this device. Adult
supervision is mandatory when children are in proximity to
an EVSE that is in use.
7
HCS EVSE User Manual
•
occasional
relocation, such as moving from one home to another home
.
•
prior to plugging in AND/OR unplugging 240V appliances
(including this EVSE).
• The
high-quality industrial grade dedicated NEMA outlet
receptacle listed to UL 498 (US) and C22.2 No. 182.3-16
(Canada) standards must be used with your plug type EVSE
if supplied with the product.
• Do not use this EVSE with an extension cord or wall plug
adapter. Plug this EVSE directly into the receptacle. We
recommend that plug-in EVSEs remain plugged into the
receptacle.
• Have an electrician
verify all wiring to the outlet is correct
and in compliance with local code requirements before
connecting the EVSE.
•
A worn or defective receptacle can cause the plug to overheat
during charge session to see if it is hot to touch. If so, we
recommend an electrician check the connection tightness and
replace the receptacle .
•
Ensure that the EVSE is mounted to the wall or placed on a
support so it does not hang from the
receptacle
.
Receptacle
s
are not designed to support the weight of the EVSE.
•
The EVSE shall be installed so that the power supply cord
HCS EVSE User Manual
8
Additional Safety Instructions
WARNING:
breaker panel before moving, servicing or cleaning the unit.
WARNING:
at the circuit breaker panel prior to plugging into or
unplugging from a wall socket.
NOTE: VENTILATION - Some electric vehicles require
an external ventilation system to prevent the accumulation
of hazardous or explosive gases when charging indoors.
Consult the vehicle owner’s manual to determine if your
vehicle requires ventilation during indoor charging.
NOTE: Vehicles which conform to the SAE J1772
standard for communication can inform the charge station
that they require an exhaust fan. The EVSE is not equipped
to control ventilation fans. Do not charge the vehicle with
the EVSE if ventilation is required.
CAUTION: DO NOT CHARGE a vehicle indoors if it
requires ventilation. Contact a Service Representative for
information.
Save these instructions for future reference.
9
HCS EVSE User Manual
FCC INFORMATION
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This product has been designed to protect against Radio Frequency
Interference (RFI). However, there are some instances where high
powered radio signals or nearby RF-producing equipment (such as
operation.
If interference to the EVSE is suspected, the following steps
should be taken before consulting a Enphase Sales or Service
Representative for assistance:
1. Reorient or relocate nearby electrical appliances or
equipment during charging.
during charging.
CAUTION
by other than an authorized service facility may void
FCC compliance.
HCS EVSE User Manual
10
OPERATION
The HCS is a compact wall or pedestal-mounted EVSE that
provides the Plug-in Hybrid or Battery Electric Vehicle (together
Plug-In Electric Vehicles, or “PEV”) user with a safe and
manageable link between the power grid and the PEV. Both
hardwired and plug-in HCS versions are available.
To use the HCS simply unwrap the charge cable and plug the SAE
Normally, the vehicle will immediately request a charge using a
special communication line in the cable. Within a few seconds the
Green “Charging” light on the face of the HCS will turn on and the
charging cycle will begin. After an average driving day the vehicle
battery pack will require several hours to recharge completely.
Charging overnight is the most convenient way to maintain healthy
batteries and ensure the vehicle’s full range will be available for
the next day.
When the vehicle has stopped charging the Green “Charging” light
charge cycle has completed (or to interrupt a charge in progress)
press and hold down the latch release lever on the connector handle
then unplug the connector from the vehicle charge port.
Autres manuels pour HCS-40
1
Ce manuel convient aux modèles suivants
5
Table des matières
Langues :
Autres manuels enphase Accessoires automobiles
