EVORA II TM
Rimless Back-to-Wall Toilet Suite INSTALLATION INSTRUCTIONS
Page 2 www.englefield.co.nz
BEFORE YOU BEGIN:
1507110-A2-B November 2022
Before proceeding with installation, please read these instructions to familiarise
yourself with the required tools, materials and installation sequences. Please leave
these instructions for the consumer after installation.
Prior to installation, inspect the toilet to ensure that no damage has occurred in tran-
sit. If damage has occurred, or a visible defect exists, do not proceed with installa-
tion, and advise your supplier immediately.
CAUTION: Risk of personal injury or product damage. Handle with care. Vitreous
China can break or chip if the product is handled carelessly.
Observe all local plumbing and building codes. Installation shall be in accordance
with AS/NZS 3500 and AS/NZS 6400.
Carefully inspect the new toilet for damage.
If the existing toilet does not have a water supply shut-off valve below the cistern,
install one before installing the new toilet.
Water supply hose not supplied for side entry. Your plumber can provide a suitable
hose of sufficient length from the shut-off valve to the cistern inlet.
WARNING: Ensure that no part ofthe cistern inlet hose issubmerged in water.
