EnGenius DURAFON-SIP SYSTEM Manuel
Basic Set-up Guide
DuraFon SIP
FreeStyl SIP
Please gather the following information from
your SIP service provider, so you have this info
ready to enter as you set-up
A
B
C
Register any additional handset to the base
unit, then connect SIP base unit to computer.
On your computer:
Open a web browser to the address below
and log-in
The system is set to DHCP, but if Static LAN IP
is used, please use these settings
Select Dynamic IP (DHCP) to automatically
obtain an IP address of your DHCP Server.
Click apply and wait 40 sec for changes to
take effect
Once rebooted, connect Base Unit to network
switch or router, scan your DHCP client list and
identify Base Unit, via the MAC address
Type in new DHCP IP Address on
the browser
Once logged in, you can conrm new IP
Changes on the LAN Settings list
Go to the VoIP tab and enter the
appropriate settings
Enter SIP Account Settings for each Handset
When complete indicator will turn Green
A
B
C
For more information
Autres manuels pour DURAFON-SIP SYSTEM
2
Ce manuel convient aux modèles suivants
1
Autres manuels EnGenius Téléphone
EnGenius
EnGenius EP902 Manuel utilisateur
EnGenius
EnGenius SPR-922U1 Manuel utilisateur
EnGenius
EnGenius DuraFon-OHC Manuel utilisateur
EnGenius
EnGenius EP-436 Manuel utilisateur
EnGenius
EnGenius SN-902 Compact Manuel utilisateur
EnGenius
EnGenius SN-920 ULTRA Manuel utilisateur
EnGenius
EnGenius EP801 Manuel utilisateur
EnGenius
EnGenius DuraFon PRO Manuel utilisateur
EnGenius
EnGenius EP-236 Manuel utilisateur
