Enfora Mini-MT GSM2228 Manuel utilisateur
Application Note:
GSM2228AN001
Enfora Mini-MT
Quick Start Guide
ver 1.01
Table of Contents
1INTRODUCTION...........................................................................................1
2GETTING STARTED.....................................................................................2
3OVERVIEW OF THE ENFORA MINI-MT ......................................................3
3.1 LED INDICATORS......................................................................................5
3.2 SWITCHES................................................................................................6
3.2.1 Push To Call (PTC) .........................................................................6
3.2.2 Set Geo-Fence................................................................................6
3.2.3 User-Defined button ........................................................................6
3.2.4 Volume Buttons...............................................................................6
3.3 INTERCONNECTIONS..................................................................................7
3.3.1 USB Connection..............................................................................7
3.3.2 Headphone Jack .............................................................................7
3.3.3 Speaker...........................................................................................7
3.3.4 Microphone......................................................................................7
3.3.5 SIM..................................................................................................7
3.3.6 Battery.............................................................................................8
4BATTERY REMOVAL / INSERTION / CHARGING......................................8
4.1 REMOVING THE BATTERY ...........................................................................8
4.2 INSERTING THE BATTERY............................................................................8
4.3 CHARGING THE BATTERY ...........................................................................8
5SIM CARD INSERTION / REMOVAL............................................................9
6MINI-MT CONFIGURATION........................................................................10
6.1 DISPATCH NUMBER.................................................................................10
6.2 SMS DESTINATION .................................................................................10
6.3 SET GEO-FENCE.....................................................................................11
6.4 USER-DEFINED BUTTON(S)......................................................................11
6.4.1 User-definable Button “
”.............................................................11
6.4.2 User-definable Button “>” ..............................................................11
6.5 SETTING THE EMERGENCY CALL NUMBER .................................................11
6.6 DIALING THE EMERGENCY CALL NUMBER..................................................12
7PC SOFTWARE INSTALLATION...............................................................13
7.1 MINI-MT USB COMPOSITE DEVICE – DRIVER...........................................14
7.2 MINI-MT USB TO UART DEVICE – DRIVER INSTALLATION.........................18
7.3 CONFIGURING THE PC AND VERIFYING COMMUNICATIONS.........................21
7.3.1 Default Serial Parameters .............................................................21
7.3.2 Determine which COM port to use.................................................21
7.4 START HYPERTERMINAL..........................................................................23
7.5 DEMO CONFIGURATION TO THE ENFORA TEST SERVER..............................26
7.5.1 Reset the modem to factory defaults.............................................26
7.5.2 Connecting the Mini-MT to the Enfora Test Server .......................26
7.5.3 Configure the Modem to Access the GPRS network.....................27
7.5.4 Verify Registration Status..............................................................28
7.5.5 Verify GPRS Activation..................................................................28
7.5.6 Configure the modem to access the Enfora Server.......................29
7.5.7 Verifying Server connectivity.........................................................31
8GPS OPERATION AND VERIFICATION....................................................34
8.1 VERIFICATION OF GPS LOCK...................................................................34
8.2 VERIFY GPS OPERATION.........................................................................34
8.2.1 GPS Operation from Terminal.......................................................34
8.2.2 GPS Operation from Enfora Demo Server ....................................35
9SAFETY INFORMATION FOR WIRELESS DEVICES ...............................36
9.1 RF EXPOSURE .......................................................................................36
9.2 SCIENTIFIC EVIDENCE ON RF EXPOSURE...................................................37
10 FCC COMPLIANCE STATEMENT ......................................................39
11 PRODUCT SAFETY INSTRUCTIONS.................................................40
REVISION HISTORY..........................................................................................41
Table of Figures
Figure 1 – Mini-MT Features.......................................................................................... 3
Figure 2 – Mini-MT Front View....................................................................................... 3
Figure 3 – Mini-MT Side View........................................................................................ 4
1 Introduction
This document provides a brief introduction to the Enfora® Mini-MT personal asset
tracking device. This guide will provide basic instructions for configuring a Mini-MT for
evaluation purposes. Advanced features are described in detail in the following reference
documents:
• Enabler-IIG AT Command Set GSM0107PB001MAN
• Mobile Tracker AT Command Set GSM2000PB001MAN
GSM2228AN001 Page 1
2 Getting Started
Getting started with the Enfora Mini-MT will require the following:
- Mini-MT (GSM2228)
- USB to mini-USB cable (not supplied) (CAW-6000-0006)
- Activated SIM card (not supplied)
- Personal Computer (not supplied)
o Operating Systems: Windows 2000, or XP
o USB port
- Enfora Mini-MT USB drivers (available from support website: www.enfora.com,
select Support, select Downloads, Accept, choose GSM)
GSM2228AN001 Page 2
3 Overview of the Enfora Mini-MT
Geo-Fence
Volume U
p
PTC
(Push To Call)
Use
r
-Defined
S
p
eake
r
LED’s
Volume Down
Micro
p
hone
Figure 1 – Mini-MT Features
Figure 2 – Mini-MT Front View
GSM2228AN001 Page 3
Headset Jac
k
USB
Connector
Figure 3 – Mini-MT Side View
GSM2228AN001 Page 4
3.1 LED Indicators
There are four LED’s used to provide status to the user. See Figure 2 for LED
information. The LED functions are defined in the table below.
Power Mode CALL ON GPS BAT
Yellow Yellow Yellow Red
Hibernate OFF OFF
OFF Low Battery,
less than 20%
Slow Blink
250mS/10Sec
Low Battery,
less than 5%
OFF
Active / Battery Blink when
registering
500mS/1 Sec
Blink for
missed call
250mS/2 Sec
Solid during
call (incoming
or initiated)
Slow blink
500mS/10Sec
Blink when
locked
500mS/2 Sec
Low Battery,
less than 20%
Slow Blink
250mS/10Sec
Low Battery,
less than 5%
OFF
Active / Aux Same as above
for Active /
Battery
ON solid Same as above
for Active /
Battery
Fast Blink,
during charge
500mS/2 Sec
OFF when
charged
GSM2228AN001 Page 5
3.2 Switches
3.2.1 Push To Call (PTC)
The Push To Call (PTC) switch allows the user to place a call to a number that has been
programmed, such as the concierge service. To meet GSM specification, pressing the
PTC button with no SIM installed will cause the unit to initiate a “411” call. The
application provider will need to configure the emergency number for its region.
3.2.2 Set Geo-Fence
The switch is used to initiate a geo-fence with a default radius of one-half mile. This
radius may be re-defined by the application provider and is retained in non-volatile
memory. If GPS is not available an error tone will be generated to alert the user that no
geo-fence was set.
3.2.3 User-Defined button
The User-Defined button is a programmable button that can be defined for various
functions. This button could be programmed to generate a call to a number different
from the PTC button, generate a geo-fence with different parameters than the geo-fence
button, send an SMS of the current location to a cell phone, send the current location to
the server, etc.
3.2.4 Volume Buttons
The Mini-MT has two volume buttons for controlling the audio volume level. These
buttons are functional whether in a call or not. The ‘+’ button is used for increasing
volume and the ‘–’ button is used for decreasing volume.
GSM2228AN001 Page 6
Table des matières
Autres manuels Enfora GPS
Enfora
Enfora MT 3050 Manuel utilisateur
Enfora
Enfora GSM2218 Manuel utilisateur
Enfora
Enfora MT4100 Manuel utilisateur
Enfora
Enfora MT-G Manuel utilisateur
Enfora
Enfora Spider AT Manuel utilisateur
Enfora
Enfora MT 3000 Manuel utilisateur
Enfora
Enfora Enfora Mini MT Manuel utilisateur
Enfora
Enfora Mini-MT GSM2228UG001 Manuel utilisateur
Enfora
Enfora Enfora Mini MT Manuel utilisateur
Enfora
Enfora G2228 Mini-MT Manuel utilisateur
