Energetics XT 910 Manuel utilisateur

XT 910 CROSSTRAINER

Table of contents - Inhaltsverzeichnis - Obsah - Obsah - Tájékoztató

English

Deutsch

Česky

Slovensky

Magyar

change in technical specification of the product.

©Die Gebrauchsanweisung dient nur zur Referenz für den Kunden. ENERGETICS übernimmt keine Haftung für Fehler die durch

Übersetzung oder technische Änderungen des Produkts entstehen.

©Návod k použití je pouze doporučení pro zákazníky. ENERGETICS nepřebírá žádné ručení za chyby způsobené překladem či změnami v

technické specfikaci výrobku.

chybnému prekladu alebo zmenám v technickej špecifikácii produktu.

hibákból vagy a termék műszaki módosításaiból eredő hibákért.

Dear Customer,

Congratulations on your purchase of an ENERGETICS home exerciser. This product has been designed

and manufactured to meet the needs and requirements of in-home use. Please carefully read the

instructions prior to assembly and first use. Be sure to keep the instructions for reference and/ or

maintenance. If you have any further questions, please contact us. We wish you lots of success and

fun while training,

Your - Team

Warranty

ENERGETICS offers high quality home exercisers that have been tested and certified according to

European Norm EN 957.

ENERGETICS warrants to the original purchaser 2 years against possible defects in material and

workmanship. Excluded are damages caused by misuse and wearing parts. All electronic parts are

warranted for a period of 1 year. The warranty period starts at the date the product was purchased

(retain your sales receipt).

Safety Instructions

Consult your physician before starting with any exercise program to receive advice on the

optimal training.

Warning: incorrect/ excessive training can cause health injuries. Stop using the home

exerciser when feeling uncomfortable.

Ensure that training only starts after correct assembly, adjustment and inspection of the

home exerciser.

Always start with a warm-up session.

Only use original ENERGETICS parts as delivered (see checklist).

Follow the steps of the assembly instruction carefully.

Only use suitable tools for assembly and ask for assistance if necessary.

Place the home exerciser on an even, non-slippery surface.

For all adjustable parts be aware of the maximum position to which they can be adjusted.

Tighten all adjustable parts to prevent sudden movement while training.

This product is designed for adults. Please ensure that children only use it under the

supervision of an adult.

Ensure that those present are aware of possible hazards, e.g. movable parts during training.

The resistance level can be adjusted to your personal preference.

Do not use the home exerciser without shoes or loose shoes.

Ensure that sufficient space is available to use the home exerciser.

Be aware of non-fixed or moving parts whilst mounting or dismounting the home exerciser.

To protect the floor or carpet from damage, place a mat under the Elliptical Trainer.

Turn off the power whilst the Elliptical Trainer is not in use.

Ensure that an area of 2000 x 1000 mm behind the Elliptical Trainer is free from any

obstacles.

This product is made for home use only and tested up to a maximum body weight of 120

kilograms.

We take no responsibility for personal injury or damage sustained by or through the use of

this home exerciser.

Handling

A. After assembly, the rear stabilizer can be adjusted to accommodate slightly uneven ground.

Turn the adjustment knobs on the ends of the rear foot caps to level the rear stabilizer to the

floor.

B. The transportation wheels on the front foot caps allow for easy manoeuvring. Simply pull

back on the handlebars until the wheels touch the floor. Then roll the unit to a desired

location.

Care and Maintenance

-The home exerciser should not be used or stored in a moist area because of possible

corrosion.

-Check at least every 4 weeks that all connecting elements are tightly fitted and in good

condition.

-In case of repair please ask your dealer for advice.

-Replace defective components immediately and/or keep the equipment out of use until

repair.

-Only use original spare parts for repair.

-Use a damp cloth to clean the Home Exerciser and avoid the use of aggressive detergents

when cleaning the bike.

-After exercising, immediately wipe of the sweat; perspiration can ruin the appearance and

proper function of the Home Exerciser.

10 12L&R

67&68

23L&R

11L&R

93L&R

74A&B

52L&R

x1 x1

x2 x2 x2

M8*90L

M8*75L

ST4*15L

M5*15L

100

M8*20L

73 M6*15L

D26*D19.5

M8*20L

D21*D16

D21*D8.5

D22xD8.5

D15.4xD8.2

M8x15L

D24*D10*0.4T

x16

101 M5*10L

D25xD8.5

x15

x20

x16 x4

104ST4*15Lx3

Checklist

Exploded drawing

18 22

17 274

9b 20

103

25L

5R 35

62 76 12R

23L 71 13

75 840 6312L

41468934

47 94 95

166085 56

63 74A 74B

4172

32L

2173

727259

100

93R

66147678388376

80L

4046

869

79 39

24 6188

32R

54 15816

52R

52L

43 96 26

87 86

101

102

25 30 29

93L

11L

11R

90 77

59 58

104

100

80R

23R

100

104

36L 36R 92

898

Part

Description

Qty

Part

Description

Qty

Main frame

Spring washer D10.5*D6.1*1.3T

Front stabilizer

52L

Left movable handlebar

Sliding beam

52R

Right movable handlebar

Oval cap

Foam (HDR) D30*3T*500L

Left foot cap

Foam (HDR) D30*4T*125L

Right foot cap

Mushroom cap D1 1/4”*45L

Curved washer D22*D8.5*1.5T

Spring D2.6*D15*82L

Spring washer D15.4*D8.2*2T

Bolt M6*1.0*15L

Flat washer D21*D8.5*1.5T

C-ring D21.5*D17.5*1.2T

Allen bolt M8*1.25*20L

Waved washer D26*D19.5*0.3T

Square neck bolt M8*1.25*90L

Flat washer D22*D10*2T

Square neck bolt M8*1.25*75L

Crank axle

Allen bolt M8*1.25*15L

Belt wheel

Handlebar post

Screw ST4*1.41*15L

11L

Supporting tube for left pedal

Computer VM6618

11R

Supporting tube for right pedal

Handle pulse

12L

Supporting tube for left movable

handlebar

Handle pulse cable 600L

12R

Supporting tube for right movable

handlebar

Allen bolt M8*1.25*50L

Bearing #99502ZZ

Left computer bracket

Flat washer D16*D8.5*1.2T

Right computer bracket

Mushroom cap D1 1/4’’*29L

Joint

Idle wheel

Fixing plate for idle wheel

Nylon nut M10*1.5*10T

Waved washer D21*D16*03T

Connecting tube

Bushing

Rear stabilizer

Bolt M6*1*15L

Domed nut M8*1.25*15L

74A

Left cover for universal joint

Pedal

74B

Right cover for universal joint

Adjustable round wheel

C-clip

23L

Upper cover (left)

Cone shaped washer

23R

Upper cover (right)

Flat washer D26*D21*1.5T

Anti-loose nut M10*1.25*7T

Bearing 608ZZ

Controller

Cover for crank

C-ring D22.5*D18.5*1.2T

80L

Enforcing plate of left pedal

Fixing plate

80R

Enforcing plate of right pedal

Adjustable round wheel

Handlebar

Upper computer cable

Nylon nut M8*1.25*8T

Lower computer cable

Bushing D17.9*10L

Round cap

Cable plug

32L

Bracket for left pedal

Nylon nut M10*1.5*10T

32R

Bracket for right pedal

Fixing plate for the post

Crank

Fixing plate for computer

Nylon nut M8*1.25*8T

Nylon nut M6*1.0*6T

Part

Description

Qty

Part

Description

Qty

Multi-groove belt

Nut M8*1.25*6T

36L

Left chain cover

Axle cover

Generator

Allen bolt M8*1.25*45L

Wheel

Side cover

93L

Rear axle over (left)

Bolt M8*1.25*20

93R

Rear axle cover (right)

Plastic flat washer D10*D24*0.4T

Bolt M6*1.0*15L

Axle

Nut M6*1*6T

Bearing #6004ZZ

Waved washer D27*D21*0.3T

Screw M6*1.0*15L

Bushing D32.5*20L

Flat washer D25*D8.5*2.0T

Cover for pedal axle

Plastic flat washer D50*D10*1.0T

Screw ST4.2*1.4*20L

Flat washer D13*D6.5*1.0T

100

Bolt N5*0.8*15L

Handlebar post cover

101

Bolt M5*0.8*10L

Plastic cover

102

Screw M6*1.0*10L

103

Screw ST4*1.41*15L

104

Screw ST4*1.41*15L

Assembly instruction

Step 1

1. Assemble the sliding beam (3) to the rear stabilizer (19) by the Spring washer(7), the flat

washer(8), and the Allen bolt(9).

2. Assemble the connecting tube (18) to the sliding beam (3) by the adjustable round wheel 22).

3. Assemble the front stabilizer (2) and the preassembled rear stabilizer (19) to the main frame

(1) by the curved washer (6), spring washer (7), allen bolt (9), square neck bolt (9a), square

neck bolt (9b) and domed nut (20).

18 22

9b 20

619

M8*20L

M8*90L

M8*75L

M8*20L

SET-1

Step 2

1. Assemble the Supporting tube for left & right pedal (11L&R) with the crank (33) by waved

washer (59), flat washer (8), bolt (40) and axle cover (90) as 2-1 shown.

2. Assemble the rear axle cover (93L&R) onto the Supporting tube for left & right pedal (11L&R)

by screw (63) and bolt (100) as 2-2 shown.

3. Assemble the pedal (21) by bolt (73) as 2-3 shown.

11L

ST4*15L

63 X2

M5*15L

100 X4

M8*20L

73 M6*15LX4

D26*D19.5

100

SET-2

21 33 59 84090

11R

11R93L

100 63

93R

2-1

2-2

2-3

Table des matières

Langues :

Autres manuels Energetics vélo elliptique

Energetics

Energetics ET 1070 Manuel utilisateur

Energetics

Energetics ET 620 Manuel utilisateur

Energetics

Energetics XT 740T Manuel utilisateur

Energetics

Energetics ET 610 Manuel utilisateur

Energetics

Energetics BB 280 Manuel utilisateur

Energetics

Energetics XT 420p Manuel utilisateur

Energetics

Energetics ET 210 Manuel utilisateur

Energetics

Energetics XT 740T Manuel utilisateur

Energetics

Energetics ET 870 PRO Manuel utilisateur

Energetics

Energetics XT 1090 Series Manuel utilisateur

Energetics

Energetics ET3.7 MAGNETIC Manuel utilisateur

Energetics

Energetics XT 520p Manuel utilisateur

Energetics

Energetics XT 1010 Manuel utilisateur

Manuels vélo elliptique populaires d'autres marques

Weslo

Weslo Momentum 4.0 Elliptical Manuel d'utilisation et d'entretien

Progear Fitness

Progear Fitness Air elliptical pro 1307 Manuel utilisateur

Torque Fitness

Torque Fitness XPLLP Manuel utilisateur

Octane Fitness

Octane Fitness PRO3700C Manuel utilisateur

Xterra

Xterra FS5.8e Manuel utilisateur

Bodyguard

Bodyguard E-40 Manuel utilisateur

Bonn Germany

Bonn Germany Concept 2.2 Manuel utilisateur

Precor

Precor Resolute RSL 620 Manuel utilisateur

NordicTrack

NordicTrack E 9.2 Elliptical Manuel utilisateur

Vision Fitness

Vision Fitness X6600iNetTV Manuel utilisateur

Matrix

Matrix MX-A5x Manuel utilisateur

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Manuel utilisateur

Sears

Sears FREE SPIRIT C249 30737 0 Manuel utilisateur

True

True FS-64 Manuel utilisateur

Sport-thieme

Sport-thieme ST 310 Manuel utilisateur

VIRTUFIT

VIRTUFIT CTR 1.1 Manuel utilisateur

Kettler

Kettler GIRO C 1 Manuel utilisateur

CIRCLE FITNESS

CIRCLE FITNESS E7 Manuel utilisateur