3.6V
Li-Ion
SCREWDRIVER
ENS460DRS
1. Hold power tool by insulated gripping surfaces, when performing an operationwhere the fastener
may contact hidden wiring or its own cord. Fasteners contacting a"live" wire may make exposed metal
parts of the power tool "live" and could give theoperator an electric shock.
2. Remove the battery pack from the drill before carrying out adjustments.
3. Do not expose to rain or water.
4. Do not store the battery pack in temperatures over 40°C.
5. Always charge the battery pack between temperatures 0°C to 30°C. Ideal charging temperature is 18°C to
24°C.
6. Only use the charger and the battery pack provided no others.
7. Do not charge a damaged battery pack.
8. Replace any damaged supply cords on your charger.
9. Always disconnect the charger from power supply before making or breaking the connections to the
machine.
10. Battery and charger will be warm during charging, this is normal.
11. When not in use, remove a charged machine from the charger.
12. Always remove the battery pack from the charger immediately after re-charging is completed.
13. Do not dispose of batteries in fire, or with household waste. Return exhausted batteries to your local
collection or recycling point.
14. Always check walls, floors and ceilings for hidden power cables and pipes.
WARNING!
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
- lead from lead-based paints,
- crystalline silica from bricks and cement and other masonry products, and
- arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles
SAFETY ADVICE FOR RECHARGEABLE BATTERY AND CHARGER
WARNING! During the use of tools supplied with batteries, the basic safety measures must be
followed in order to reduce fire hazards, electrolyte leakage and personal injury, including the
following precautions:
Ensure that the battery/ battery pack is suitable for the tool.
Ensure that outside surface of the battery pack is clean and dry before connecting it to the charger.
Ensure that the batteries are charged using the correct charger recommended by the manufacturer. Incorrect
use can create a risk of electric shock, overheating or the leaking of corrosive liquid from the battery.
If there is an electrolyte leak, avoid any contact with the skin. In the event of a leak, wipe with a rag. If the liquid
comes into contact with the skin, rinse abundantly with water. In the event of a reaction or contact with the
eyes or mucous membranes, consult a doctor.
Ensure that the appliance is properly switched off before inserting the battery into the appliance. Inserting a
battery into a appliance while it is switched on can cause accidents.
SPECIAL SAFETY INSTRUCTIONS
