3
Description of Lint Scrubber Operation
AUTOMATIC OPERATION/ LS8000 & LS6000
Your new Lint Scrubber has a UL® listed control. The Energenics control
represents state of the art in the Laundry Industry for operations and safety.
The Lint Scrubber 8000 utilizes two ¾ HP vacuum blowers and the Lint Scrubber
6000 utilizes one 3/4 HP vacuum blower to draw the lint filled air past filter media
of 200 micron that layers the lint onto the surface of the media.
The filter media is made of flat bonded polyester and is specifically designed to
collect lint and dust particles created by laundry textile handling operation.
When turned on the machine suctions the air-borne lint onto the screen. When
the screen loads with lint and optimum air flow is being limited by the lint buildup,
the pressure transducer signals the filter control and advances the filter material
until enough clean screen allows the air flow to return to satisfactory levels.
The exhaust from the Lint Scrubber is directed vertically to assist in cleaning
pipes, lights, and other devices overhead. Vertical exhaust will prevent the hot
air from equipment to be exhausted toward production personnel.
The included 2-rolls of Lint Scrubber media will last approximately 6 months in
normal operation. It is important to have a spare roll ready for immediate
replacement.
Proper operation is noted when the green light is illuminated. During media
advance the yellow light will also illuminate.
If the unit is very close to the sheets the draw maybe strong enough to lift the
sheet off of the ironer. In this case the machine should be elevated higher.
MANUAL OPERATION / LS3000
Turn the Lint Scrubber fans on by either pressing the power switch up or down.
To advance the media depress the Manual Advance button. The button is a
momentary switch and will only activate when depressed. The advance will stop
when the button is released.
