The Enerdrive MPPT Solar Controllers adopt the advanced Maximum Power Point Tracking control
algorithm. It can minimise the maximum power point loss rate and loss time, quickly track the maximum
power point (MPP) of the PV array and obtain the maximum energy from the solar array under any
conditions; and it can increase the ratio of energy utilization in the solar system by up to 20%-30%
compared with PWM charging method. IP33 Ingress protection and isolated RS485 design further
improve the controller’s reliability and meet the dierent application requirements.
Enerdrive MPPT Solar Controllers include self-adaptive three-stage charging mode based on digital
control circuit, which can eectively prolong the lifespan of batteries and signicantly improve the system
performance. It also has comprehensive electronic protection for overcharge, over discharge and PV/
battery reverse polarity. This controller is suitable for RV, Marine, Remote O Grid monitoring and many
other applications.
• CE certication(LVD EN/IEC62109,EMC EN61000-6-1/3)
• LCD display
• Advanced MPPT technology & ultra-fast tracking speed with eciency up to 99.5%
• Maximum DC/DC transfer eciency is as high as 98.6%.
• Advanced MPPT control algorithm to minimize the MPP lost rate and lost time
• Accurate recognition and tracking of multi-peaks maximum power point
• Wide MPP operating voltage range
• Support lead-acid and lithium batteries; voltage parameters can be set on the controller
• Limit charging power & current over rated value
• Real-time energy statistics function
• Power reduction automatically over temperature value
• Multiple load work modes
• Comprehensive electronic protection
• Isolated RS485 with 5V/200mA protected output for no power devices, with Modbus protocol
• IP33 Ingress protection
For battery types other than Lithium, the BCV, FCV, LVD, and LVR, users can modify them on the controller
by setting the battery type to "USE."
www.enerdrive.com.au Page 5
1. GENERAL INFORMATION
1.1 OVERVIEW
FEATURES
