Endress+Hauser Levelflex FMP50 Caractéristiques techniques

Brief Operating Instructions

Levelflex FMP50

Guided Level-Radar

These Instructions are Brief Operating Instructions; they do not replace the

Operating Instructions included in the scope of supply.

For detailed information, refer to the Operating Instructions and other

documentation on the CD-ROM provided or visit "www.endress.com/

deviceviewer".

KA01071F/00/EN/13.12

71206428

Table of contents Levelflex FMP50

2 Endress+Hauser

Table of contents

1 Important document information ............................... 3

1.1 Document conventions ........................................... 3

2 Basic safety instructions ...................................... 4

2.1 Requirements concerning the staff ...................................... 4

2.2 Designated use ............................................... 4

2.3 Workplace safety .............................................. 5

2.4 Operational safety .............................................. 5

2.5 Product safety ................................................ 5

3 Product description ......................................... 6

3.1 Compact device Levelflex .......................................... 6

3.2 Electronics housing ............................................. 7

4 Incoming acceptance and product identification ..................... 8

4.1 Incoming acceptance ............................................ 8

4.2 Product identification ............................................ 9

5 Storage, Transport ........................................ 10

5.1 Storage conditions ............................................. 10

5.2 Transport product to the measuring point .................................. 10

6 Mounting ............................................... 11

6.1 Suitable mounting position ......................................... 11

6.2 Notes on the process connection ...................................... 12

6.3 Securing the probe ............................................. 14

6.4 Special mounting conditions ........................................ 15

6.5 Mounting the device ............................................ 19

6.6 Post-installation check ........................................... 23

7 Electrical connection ....................................... 24

7.1 Connection options ............................................ 24

7.2 Connection options ............................................ 26

7.3 Connection data .............................................. 27

7.4 Connecting the measuring device ...................................... 28

7.5 Post-connection check ........................................... 31

8 Integration into a PROFIBUS network ........................... 31

8.1 Overview of the device database files (GSD) ................................. 31

8.2 Set device address ............................................. 32

9 Commissioning via operating menu (On-site display, FieldCare) ......... 34

9.1 Display and operating module ....................................... 34

9.2 Operating concept ............................................. 36

9.3 Adjust the display contrast ......................................... 38

9.4 Unlock the device ............................................. 38

9.5 Set the operating language ......................................... 40

9.6 Configuration of a level measurement .................................... 41

9.7 User-specific applications (operation) .................................... 42

Levelflex FMP50 Important document information

Endress+Hauser 3

1 Important document information

1.1 Document conventions

1.1.1 Safety symbols

in preparation

1.1.2 Electrical symbols

Symbol Meaning

A0011197

Direct current

A terminal to which DC voltage is applied or through which direct current flows.

A0011198

Alternating current

A terminal to which alternating voltage (sine-wave) is applied or through which alternating current

flows.

)

A0011200

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a grounding system.

A0011199

Protective ground connection

A terminal which must be connected to ground prior to establishing any other connections.

A0011201

Equipotential connection

A connection that has to be connected to the plant grounding system: This may be a potential

equalization line or a star grounding system depending on national or company codes of practice.

1.1.3 Tool symbols

A0011219 A0011220 A0013442 A0011221 A0011222

Phillips head

screwdriver

Flat blade

screwdriver Torx screwdriver Allen key Hexagon wrench

1.1.4 Symbols for certain types of information

in preparation

1.1.5 Symbols in graphics

in preparation

Basic safety instructions Levelflex FMP50

4 Endress+Hauser

2 Basic safety instructions

2.1 Requirements concerning the staff

The staff must fulfill the following requirements for their tasks:

►Trained staff: Must have a qualification which corresponds to their function and tasks.

►Authorized by the plant operator.

►Familiar with the national regulations.

►Before starting their work: Must have read and understood all instructions in the operating

manual and supplementary documentation as well as the certificate (depending on the

application).

►Must comply with all instructions and the regulatory framework.

2.2 Designated use

Application and measured materials

The measuring device described in these Operating Instructions is intended only for level

measurement of liquids. Depending on the version ordered the device can also measure

potentially explosive, flammable, poisonous and oxidizing materials.

Observing the limit values specified in the "Technical data" and listed in the Operating

Instructions and supplementary documentation, the measuring device may be used for the

following measurements only:

►Measured process variables: level

►Calculated process variables: Volume or mass in arbitrarily shaped vessels (calculated from

the level by the linearization functionality)

To ensure that the measuring device remains in proper condition for the operation time:

►Use the measuring device only for measured materials against which the process-wetted

materials are adequately resistant.

►Observe the limit values in "Technical data".

Incorrect use

The manufacturer is not liable for damage caused by improper or non-designated use.

Verification for borderline cases:

►For special measured materials and cleaning agents, Endress+Hauser is glad to provide

assistance in verifying the corrosion resistance of wetted materials, but does not accept any

warranty or liability.

Residual risk

The electronics housing and its built-in components such as display module, main electronics

module and I/O electronics module may heat to 80 °C (176 °F) during operation through

heat transfer from the process as well as power dissipation within the electronics. During

operation the sensor may assume a temperature near the temperature of the measured

material.

Danger of burns due to heated surfaces!

►For high process temperatures: Install protection against contact in order to prevent burns.

Levelflex FMP50 Basic safety instructions

Endress+Hauser 5

2.3 Workplace safety

For work on and with the device:

►Wear the required personal protective equipment according to federal/national regulations.

2.4 Operational safety

Risk of injury!

►Operate the device in proper technical condition and fail-safe condition only.

►The operator is responsible for interference-free operation of the device.

Conversions to the device

Unauthorized modifications to the device are not permitted and can lead to unforeseeable

dangers

►If, despite this, modifications are required, consult with Endress+Hauser.

Repair

To ensure continued operational safety and reliability,

►Carry out repairs on the device only if they are expressly permitted.

►Observe federal/national regulations pertaining to repair of an electrical device.

►Use original spare parts and accessories from Endress+Hauser only.

Hazardous area

To eliminate a danger for persons or for the facility when the device is used in the hazardous

area (e.g. explosion protection, pressure vessel safety):

►Based on the nameplate, check whether the ordered device is permitted for the intended

use in the hazardous area.

►Observe the specifications in the separate supplementary documentation that is an integral

part of these Instructions.

2.5 Product safety

This measuring device is designed in accordance with good engineering practice to meet state-

of-the- art safety requirements, has been tested, and left the factory in a condition in which

they are safe to operate.

It fulfills general safety requirements and legal requirements. It also conforms to the EC

directives listed in the device-specific EC declaration of conformity. Endress+Hauser confirms

this fact by applying the CE mark.

Product description Levelflex FMP50

6 Endress+Hauser

3 Product description

3.1 Compact device Levelflex

A0013771

å 1 Design of the Levelflex

1Electronics housing

2 Process connection (Thread)

3 Rope probe

4 End-of-probe weight

5 Rod probe

Levelflex FMP50 Product description

Endress+Hauser 7

3.2 Electronics housing

Esc

–+E

123

A0012422

å 2 Design of the electronics housing

1Electronics compartment cover

2 Display module

3 Main electronics module

4 Cable glands (1 or 2, depending on instrument version)

5 Nameplate

6 I/O electronics module

7 Terminals (pluggable spring terminals)

8 Connection compartment cover

9 Grounding terminal

Incoming acceptance and product identification Levelflex FMP50

8 Endress+Hauser

4 Incoming acceptance and product identification

4.1 Incoming acceptance

A0013696

DELIVERY NOTE

1 = 2

A0016870

A0013921

A0013696 A0013922

Levelflex FMP50 Incoming acceptance and product identification

Endress+Hauser 9

A0013696

DELIVERY NOTE

Made in Germany, 79689 Maulburg

A0014038

A0013696

A0014037

If one of the conditions does not comply, contact your Endress+Hauser distributor.

4.2 Product identification

The following options are available for identification of the measuring device:

• Nameplate specifications

• Order code with breakdown of the device features on the delivery note

•Enter serial numbers from nameplates in W@M Device Viewer

( www.endress.com/deviceviewer ): All information about the measuring device is

displayed.

For an overview of the scope of the Technical Documentation provided, refer to the following:

enter serial numbers from nameplates in W@M Device Viewer

( www.endress.com/deviceviewer )

Storage, Transport Levelflex FMP50

10 Endress+Hauser

Order code:

Ext. ord. cd.:

Ser. no.:

A0014103

å 3 Example of a nameplate

1Order code

2 Serial number (Ser. no.)

3 Extended order code (Ext. ord. cd.)

Only 33 digits of the extended order code can be indicated on the nameplate. If the

extended order code exceeds 33 digits, the rest will not be shown. However, the

complete extended order code can be viewed in the operating menu of the device

(Diagnostics ® Device info ® Extended order code 1/2/3).

For detailed information about interpreting the nameplate specifications, refer to the

Operating Instructions for the device on the CD-ROM provided.

5 Storage, Transport

5.1 Storage conditions

• Permitted storage temperature: –40 to +80 °C (–40 to +176 °F)

• Use the original packaging.

5.2 Transport product to the measuring point

!WARNING

Risk of injury if the hosuing breaks away!

►Transport the measuring device to the measuring point in its original packaging or at the

process connection.

►Comply with the safety instructions, transport conditions for devices over 18kg (39.6lbs).

Autres manuels pour Levelflex FMP50

Table des matières

Autres manuels Endress+Hauser Radar

Endress+Hauser

Endress+Hauser Micropilot FWR30 Manuel utilisateur

Endress+Hauser

Endress+Hauser HART Micropilot S FMR533 Manuel utilisateur

Endress+Hauser

Endress+Hauser Micropilot FMR62B Caractéristiques techniques

Endress+Hauser

Endress+Hauser micropilot M FMR 231 Manuel utilisateur

Endress+Hauser

Endress+Hauser Micropilot FMR50 Instructions d'utilisation et d'installation

Endress+Hauser

Endress+Hauser Micropilot FMR63B Caractéristiques techniques

Endress+Hauser

Endress+Hauser Micropilot M FMR250 Manuel utilisateur

Endress+Hauser

Endress+Hauser Micropilot M FMR250 Caractéristiques techniques

Endress+Hauser

Endress+Hauser Levelflex FMP56 Caractéristiques techniques

Endress+Hauser

Endress+Hauser Levelflex FMP55 Manuel utilisateur

Endress+Hauser

Endress+Hauser Levelflex FMP50 Instructions d'installation

Endress+Hauser

Endress+Hauser Micropilot FMR63B PROFIBUS PA Manuel

Endress+Hauser

Endress+Hauser Levelflex FMP55 Manuel utilisateur

Endress+Hauser

Endress+Hauser Micropilot M FMR250 Manuel utilisateur

Endress+Hauser

Endress+Hauser Levelflex FMP56 Manuel

Endress+Hauser

Endress+Hauser HART Micropilot S FMR533 Caractéristiques techniques

Endress+Hauser

Endress+Hauser PROFIBUS PA Micropilot FMR53 Caractéristiques techniques

Endress+Hauser

Endress+Hauser Levelflex FMP53 FOUNDATION Fieldbus Caractéristiques techniques

Endress+Hauser

Endress+Hauser Levelflex FMP56 Manuel utilisateur

Endress+Hauser

Endress+Hauser Micropilot M FMR231 Manuel utilisateur

Endress+Hauser

Endress+Hauser FOUNDATION Fieldbus Micropilot FMR56 Caractéristiques techniques

Endress+Hauser

Endress+Hauser Micropilot NMR81 Instructions d'utilisation

Endress+Hauser

Endress+Hauser Micropilot FMR62B PROFINET with Ethernet-APL Manuel

Endress+Hauser

Endress+Hauser PROFIBUS PA Levelflex FMP50 Caractéristiques techniques

Manuels Radar populaires d'autres marques

SAW D2L

SAW D2L Valentine One Gen2 Manuel utilisateur

Raymarine

Raymarine Raytheon R20X Manuel utilisateur

Simrad

Simrad CA34 Manuel utilisateur

ECHOMAX

ECHOMAX Active-X-Band Manuel utilisateur

AGD

AGD 340 Manuel utilisateur

Kustom Signals

Kustom Signals Eagle 3 Manuel utilisateur

SYMEO

SYMEO STU Manuel utilisateur

Axis

Axis D2110-VE Manuel utilisateur

MALA

MALA MIRA Manuel utilisateur

Emerson

Emerson ROSEMOUNT 5300 Manuel utilisateur

Rosemount

Rosemount 5300 Series Manuel utilisateur

TERMA

TERMA SCANTER 5102 Manuel utilisateur

GSSI

GSSI UtilityScan Manuel utilisateur

Acconeer

Acconeer A111 Manuel utilisateur

Crosley

Crosley CR37 Manuel utilisateur

AGD

AGD 318 Manuel utilisateur

Cobra

Cobra SLR 650G Manuel utilisateur

Faselase

Faselase D10 Manuel utilisateur