Encore ENMVG - Manuel utilisateur
ENMVG
USB Audio/Video Grabber
User’s Guide
ENMVG - User’s Guide
User’s Notice
This manual is provided “as is” without warranty of any kind, either express or implied,
including but not limited to the implied warranties or conditions of merchantability or fitness
for a particular purpose. In no event shall we, its directors, officers, employees or agents
be liable for any indirect, special, incidental, or consequential damages (including
damages for loss of profits, loss of business, loss of use or data, interruption of business),
even if we have been advised of the possibility of such damages arising from any defect or
error in this manual or product.
Specifications and information contained in this manual are furnished for information
use only, and are subject to change at any time without notice, and should not be
construed as a commitment by us. We assume no responsibility or liability for any errors or
inaccuracies that may appear in this manual, including the products and software
described in it.
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of us.
Product warranty or service will not be extended if: (1) the product is repaired,
modified or altered, unless such repair, modification of alteration is authorized in writing by
us; or (2) the serial number of the product is defaced or missing.
Products and corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Windows, MS-DOS, and DirectX are registered trademarks of Microsoft Corporation.
Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
The product name and revision number are both printed on the product itself. Manual
revisions are released for each product design represented by the digit before and after
the period of the manual revision number. Manual updates are represented by the third
digit in the manual revision number.
Copyright © 2009 Encore Electronics, Inc. All Rights Reserved.
ENMVG - User’s Guide
Contents:
Chapter 1: Introduction...................................................................................................................... 1
1.1 Package Contents................................................................................................................. 1
1.2 System Requirements........................................................................................................... 1
Chapter 2: Getting Started ................................................................................................................. 2
2.1 Connect ENMVG................................................................................................................. 2
2.2 Device Driver Installation.................................................................................................... 2
2.3 Install the Utility software. .................................................................................................. 5
Chapter 3: Launch the Software ........................................................................................................ 8
3.1 The ENMVG utility............................................................................................................. 8
3.2 Record Video........................................................................................................................ 8
3.3 Snapshot Image.................................................................................................................... 9
3.4 Playback Video .................................................................................................................. 10
3.5 Browse Image .................................................................................................................... 12
Chapter 4: Supports Center:............................................................................................................. 12
1
Chapter 1: Introduction
1.1 Package Contents
Upon receiving your ENMVG, please make sure the following items are included in the
ENMVG package.
ENMVG Device
CD
Quick Installation Guide
USB cable
1.2 System Requirements
Microsoft Windows
®
7/XP/Windows Vista
TM
IBM
®
PC or compatible, with Intel
®
Pentium
®
4 2.0GHz CPU or better
Minimum 128MB memory and 100 MB hard disk space
1024x768 graphic card, DirectX
®
9.0c or above compatible graphic card or higher
One free USB2.0 port.
CD-ROM drive
Hard Disk: 5400 RPM or above (7200 RPM preferred)
2
Chapter 2: Getting Started
2.1 Connect ENMVG
To install the ENMVG into your computer, follow the steps below:
1. Connect the ENMVG to PC USB Hub.
2.2 Device Driver Installation
Placed the CD disk that comes with the ENMVG in the CD-ROM drive, then follow the
on-screen installation guide below.
1. Insert the installation CD into the
CD-ROM drive. The setup screen will
automatically appear.
2. Select the language
3. Click the “Setup Driver” button.
3
4. Select the Language and click “Next” to
start installation.
5. Click “Next” button to continue.
6. Click “Next” button to continue.
4
7. Installation wizard will automatically co
py
driver to PC system, and then click
“Finish” button.
8. Click “Finish” button.
9. Click “OK” button to restart PC system.
5
10.Connect the ENMVG Device to PC USB
Hub, then system will detect new driver
“USB Video Grabber”.
11.To make sure the driver is properly
installed and started, open the “Device
Manager”. Please double-click the
“Sound, video and game controller”
2.3 Install the Utility software.
1. Insert the installation CD into the
CD-ROM drive. The setup screen will
automatically appear.
2. Select the language
3. Click the “Setup Utility” button.
6
4. Select the Language and click “Next” to
start installation.
5. Click “Next” button to continue.
6. Click “Yes” button to continue.
7
7.
Click “Next” button or choose setup folder
for installation.
8. Click “Finish” button to exit.
Autres manuels pour ENMVG -
1
Table des matières
Autres manuels Encore Accessoires informatiques
