Connection to ECweb established
First page to be displayed after an initial welcome page when connection is established
is the front page of ECweb.
Whenever navigating around the ECweb you can always return to this page by clicking
the ENcombi logo in the upper left corner.
In the upper right corner you can see the current access login level. Find more
information about this in chapter revolving password scheme.
In the lower left corner ECpv will display any info and warning messages it whant to
communicate to the user. Some messages will clear themselves automatically. Others
demand user action to be acknowledged first. In that case a dedicated button with
garbage can symbol will be presented alongside with the messages. Furthermore when
changing certain settings etc. a reboot of the ECpv is required before the changes take
effect. This will be communicated in the message as well and a dedicated button with
refresh symbol will be presented alongside with the messages.
In the lower right corner is the internal clock of the ECpv displayed.
In the lower center a total of six menu tiles are available. These are from the left:
1. “Identifiers” gives access to overview of SW version installed and extras present
in the ECpv as well as set up of project details (name, location etc.), password
scheme etc.
2. “EClogic” provide the possibility of making project specific logical expressions
when required. That could be for linking physical digital inputs applied on power
meters to position of breakers or similar. Also here RRCR can be setup providing
6
